Question about Toshiba e-Studio 161 Copier Copier

2 Answers

I have a message coming up that I don't know what it means.

The message is, ''Check ADF/RADF. What does it mean? It also ''squeeles'' when you hit start. And it does not copy.
Help.
Melinda

Posted by on

  • mparkerjohns Jun 22, 2009

    Thanks guys! I still was fiddling with the thing after I wrote you. I found a clear dial in the area the copies come out was turned to "locked". Turning it seemed to make it all work again. Thanks for ur advise, I will check the wheel in the ADF, that may be a problem also. Thanks again!

    M

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 108 Answers

ADF = Auto Document Feeder (Usually on top)

RADF = Rear Auto Document Feeder, (On the back)

Something is stuck in one of these, a piece of paper, foam, paperclip, twist tie . . . it could be anything. Follow the squealing sound and check the paper feeder rollers.

Find what is in the way and remove it.

Cheers.

Posted on Jun 22, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 199 Answers

The adf is the feeder of the copy machine where you put your originals sheets to be copy the automatic feeder, if you hear the noise it might be that the pullers on the feeders are dirty or really old they start making sound so try opening the feeder and checking the little wheel

tahnks

Posted on Jun 22, 2009

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Problem on RADF misfeed but no misfeed at all. what should I do


please clean the sensors located in the RADF and power the machine and the problem is over

Mar 13, 2014 | Lanier 5222/27 Laser Printer

1 Answer

How do you fix error code c55


Here are the steps they recommend in the users manual for a c55 error.



5.1.11 Optional communication related service call
[C55] ADF I/F error
[F11] ADF I/F error
(1) Check if the connector CN71 on the ADF/RADF board is disconnected.
(2) Check if the relay connector between the ADF/RADF board and the PFC board is disconnected.
(3) Check if the connector CN246 on the PFC board is disconnected.
(4) Check if the connector pins are disconnected and the harnesses are open circuited.
(5) Check if the conductor patterns on the ADF/RADF board and the MAIN board are short circuited
or open circuited.
(6) Replace the ADF/RADF board.
(7) Replace the MAIN board

Jan 05, 2013 | Toshiba e-STUDIO166 Printer

1 Answer

Error message with canon mx410 "cannot scan from adf"


I fixed this by changing the Copy Intensity from Auto to Manual
I had the same paper jam (caused by pressing Stop during a page going into the ADF), but I had pressed OK as instructed and the page was auto fed back out again. Then I couldnt copy from ADF after that.
I tried everything, and then started to retrace my steps of all the things I might have tinkered with to try and get the copying working in the first place, before the paper jam.
Then I remembered I had set the Copy Intensity from Manual to Auto (thinking Auto is always best). With hindsight, it now makes sense for it to be manual with the ADF as otherwise how would it load a page, use it to set auto density, and then reload it again for the actual copy to occur. This happens okay on the flatbed scanner as it can scan a little, work out the settings, and then scan for real.
Copy Intensity is reached on my Canon MX from the Menu button at the bottom left of the front panel. - Then press the right arrow twice to get to Color Intensity. - Hit OK. - Then right arrow from "Auto" to "Manual Adjust"- Then pick a setting or leave it as half-way between light and dark- Press OK
Now every time my ADF copying works a treat. Thats what I get for tinkering in things I didn't need to change in the first place. I was just trying to get a quick copy going from ADF to paper without saving a file up on the computer and then printing.

Aug 09, 2012 | Canon Pixma MX410 All-In-One Printer

1 Answer

Toshiba eStudio 203SD. ADF doesn't work despite tech "fixing" it. Put docs in ADF, message "Check ADF/RADF."


Most likely there is a sensor that is out of place. That is the most likely problem. If it is not out of position then it may have failed. But what is happening is when you insert the document into the feeder, the machine is detecting a paper already in the feeder.

Aug 03, 2010 | Toshiba Office Equipment & Supplies

1 Answer

How do i copy front and back in the adf


u have to use RADF for both side copying

Mar 08, 2010 | Toshiba E-Studio167 Copier

1 Answer

When using the adf get error message


Advice is terribly difficult without a model number of your machine

Mar 06, 2009 | Canon Office Equipment & Supplies

1 Answer

Radf problems on e-studio 232


Hello sir; As you said everything is ok, then the only thing you need to do is solenoid problem, replace it. but make sure exit roller clean enough.

Jan 12, 2009 | Toshiba e-Studio 232 Black and White...

2 Answers

Hp 3055 adf


Here's a link to the full service manual for your HP 3055. It's too large to post here (15MB) but I've hot linked it for you so you can download it to resolve your issue with the ADF. Look at pages 44 thru 46. Pay special attention to the rubber pad (separation pad) that is under the 2 roller peice as it is what keeps the doc feeder pulling one sheet at a time.

Hope that helps you. If so hit me with a FIXYA, If not send me a message or reply and I'll try and walk you through it.

http://h20181.www2.hp.com/plmcontent/NACSC/Printers/LaserJet/30328_020806/course/library/service/lj3050-3052-3055aio/Q6502_service_enww.pdf

Sep 02, 2008 | HP LaserJet 3055 All-In-One Printer

Not finding what you are looking for?
Toshiba e-Studio 161 Copier Copier Logo

242 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Office Equipment & Supplies Experts

didi2005

Level 3 Expert

628 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

Branko Djurdjevic
Branko Djurdjevic

Level 2 Expert

103 Answers

Are you a Toshiba Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...