Question about Xerox 5500/DT Laser Printer

1 Answer

What is error code 093 329 on a xerox color c75 press ?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Xerox Expert
  • 107 Answers

Xerox Color C75 Press with EFI Fiery Controller Support Drivers

Solutions for : Fault Code 093-329: Toner Refill Stop, Detected That an Incorrect Toner Cartridge Refill Was Installed Related Fault Code:093-329 Solutions ranked by relevance:

  1. Check to See if a Toner (Dry Ink) Cartridge Needs to be Replaced
  2. If the Toner Cartridge Has Recently Been Replaced, Remove the Cartridge and Shake it Gently
  3. Replace the Appropriate Toner (Dry Ink) Cartridge

Posted on Jun 16, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does error code 99,013.00:49569 mean xerox 8570 color cube?


Process Drive Fault"

Do you have another kit you can take from another printer.
Switch the printer off.
Swap out the kit with the one from the other printer.
Turn it back on. If it clears the fault when the printer is ready put back the new kit

Aug 14, 2015 | Xerox Office Equipment & Supplies

1 Answer

Xerox error code


Try this:
Enter Service mode:
1. On the Control Panel, press the Down Arrow button to select
Troubleshooting and then press OK.
2. Press the Down Arrow button to select Service Tools, and then press
OK.
3. While pressing and holding down the Up Arrow button, press the Down
Arrow button to display the Hidden Service Menu.

Select Reset Error Log
Reboot the machine? Yes
Wait for about 15 min.
Should be all right after that.

Last time did work just fine for me!
If don't work mail me at:
innovaprinters@hotmail.com or
impressaodigital.poa@hotmail.com

And we try something else.

Jul 22, 2014 | Xerox Corporation Xerox ColorQube 8570DT...

2 Answers

Error code 010-319 on xerox DP 700 ?


error code 010-319 replaced fuser still the same

Jan 01, 2012 | Xerox DocuColor 12 Color Copier

5 Answers

Xerox dc 12 error code 9-357


9-357 Black Toner Dispenser Broken.

Dec 19, 2009 | Xerox DocuColor 12 Color Copier

1 Answer

Xerox XC 1045 has a flashing H 4 error.




elem_1_spacer.gif Performing a Fault Reset 14 will reset your copier and will help to clear error codes.
  1. Turn the power off.
  2. Locate the Clear Button, which is grey in color, in the upper right corner above the green Start Button.
  3. Locate the Auto Button the lower left corner of the Control Panel.
  4. Turn the power back on.
  5. Press the buttons in the following sequence, releasing each button after each time you press it: [Clear], [Auto], [Clear], [Auto]. Every light on the Control Panel should go out, and the error code should clear.
  6. If the error code has not cleared, wait a few seconds then repeat Steps 1 through 5.
  7. Program the copier as if you were going to make 14 copies.
  8. Press the green [Start] button to store the reset code. The copier will return to the ready position.
  9. Run a test copy.

Jul 01, 2009 | Xerox Office Equipment & Supplies

1 Answer

Xerox majestik 5765 error codes


Sorry I am not familiar with this machine, usually if you press the start key for 3 sec it should show you the other codes? Good luck.

P.S.: If i run into anything I'll send it to you .

Jan 12, 2009 | Xerox DocuColor 12 Color Copier

2 Answers

Error Code 10-399


Hello sir; The problem you have can be reset, just follow the steps as below;
1, power on the machine.
2, while hold down the 0 key, press start.
3, enter the access number 6789
4, click onNVM reset/NVM initialization.
5, enter 777-018 press start.
if still have problem let me know

Jan 02, 2009 | Xerox DocuColor 12 Color Copier

Not finding what you are looking for?
Xerox 5500/DT Laser Printer Logo

3,403 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Office Equipment & Supplies Experts

Xeroxrep

Level 1 Expert

33 Answers

Philip Hughes

Level 2 Expert

72 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Xerox Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...