Question about GE Washing Machines
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: I have a GE Profile
if you remove the two wire harness that snaps on the invertor and check it with an ohm meter..this goes to the mode shifter ..it reads around 98 ohms when ok...usually, however, when this is bad..the machine will spin while its washing. i have seen this code and still be a bad invertor motor..i have seen all different codes and still be a bad motor...but, check the ohms first before buying a motor..actually, i rather replace the motor then that part of the tranny....
Posted on Jan 23, 2011
SOURCE: GE Profile Hydrowave Model #
Hi from retired Englishman in SW France,
It COULD be the motor but it could also be a number of causes such as wiring, control PCB etc.
Draining is carried out by a separate motor. I fear a service call is required to investigate and diagnose, sorry ;-0(
Posted on Mar 12, 2011
Tips for a great answer:
Oct 26, 2014 | GE Profile WPRE6100G Top Load Washer
on Sep 03, 2009 | GE Profile DPSB619ED Electric Dryer
Mar 12, 2011 | GE Washing Machines
Jan 23, 2011 | Washing Machines
Jan 21, 2011 | GE Washing Machines
Jan 08, 2011 | GE Profile 25.6 Cu. Ft. Side-by-Side...
May 17, 2010 | GE Profile Spectra JGBP90 Gas Kitchen...
Sep 16, 2009 | GE Profile WPRE6100G Top Load Washer
Sep 11, 2009 | GE Profile 26.6 cu. ft. Side-by-Side...
19 people viewed this question
Usually answered in minutes!