I need codes for sony audio system - Televison & Video

The Sony STR-K660P is listed as stereo receiver, but here is list of codes for the Sony devices:

http://remote-codes.findthedata.com/l/297/Sony-Remote-Codes

The code that the car stereo AV center is looking for is a 4-digit security code that is programmed into your system during the installation process. This code is generally needed when one of the following issues occurs on the car stereo:

• the AV center was reset.
• the screen locks up on the unit.

If you purchased the vehicle from an individual, contact the seller of the car to see if they can give you the code. If you had your AV center professionally installed, we recommend that you contact the installer to see if they are able to provide you with the code.
If the seller of the vehicle or the installer is not able to assist you, or if you installed the system yourself, please contact the Customer Experience Center at (239) 768-7547 to speak with a customer service representative.

try putting i the the following codes 0000,1111,1234 hope this helps

What is the device code for the Sony STR K750P? I'm tying to set up a universal remote control and need the 4 digit code.

Here's a code: Z8r335awMPZZyf90#*22V

Refer to page 82 in your Dish Network User's Guide......(Make sure Sony system is powered on and in DVD mode with a disc in the player).  Point Dish remote at Sony box -  Hold Aux until all buttons light up at top....press 2 - then STAR button* and then POWER button - then press the up arrow key repeatedly until Sony turns off - press # key to lock in code.
It took me awhile to get it to work....it will only work power, mute, and volume - not dvd play functions. Refer to page 85 to make the Dish remote control the Sony box volume by default.
Good luck.

It seems like most (maybe all) Sony HTIB do not work with the Comcast Custom Remote. I've found a work around that fixes the volume control and power button though. Hope it helps you all. I have a DAVHDX275 but I think this will work for most Sony HTIB systems.

What you need to do is steal some codes from a like product and then hardcode in the changes you need to the comcast remote. Set your AUX to 21232 (a sony code for TV/VCRs).

Then do the following:

1. While still on AUX, press and hold SETUP again until the remote blinks twice
2. Type 994
3. Press and release SETUP
4. Type 32975
5. Press and release VOL+
The remote should blink twice. That should reprogram the VOL+ to work with your Sony HT device. For each of the following function codes, follow the same steps and use the codes listed below:
Vol+ = 32975
Vol- = 31951
Power = 32719
Good luck. Let me know if it works.