my Microtek 600 Heritage+ is not giving back up after the power gets cut and my system automatically gets shut down immediately without running even for 1 second.what is the problem exactly? and where is the problem? either its in OS or BIOS or in the UPS itself. as this does not happens all the time but most of the time.
A have a Liebert equipment AP 312 of 30 kva´s with the alarm message(inverter is over...
(More)
A have a Liebert equipment AP 312 of 30 kva´s with the alarm message(inverter is over current in phase c), I already changed the damaged components (two IGBT´s and base drive board)but alarm persits yet, the others legs appear good.
Tripp-Lite internet Office UPS. Utilizado con PC, monitor e impresora. Problema: Luz verde y roja...
(More)
Tripp-Lite internet Office UPS. Utilizado con PC, monitor e impresora. Problema: Luz verde y roja encendidas permanentemente (el modelo solamente tiene dos luces indicadoras al frente). No hay energía en enchufes con respaldo de batería; solamente funcionan los enchufes estabilizadores de energía. El Trpp-Lite no se apaga al sostener apretado el botón encendido/apagado. No emite ningún sonido como antes lo hacía. Gracias.
We purchased a Max ER-1100 timeclock from a seller on Ebay. When we received we noticed there wasn't...
(More)
We purchased a Max ER-1100 timeclock from a seller on Ebay. When we received we noticed there wasn't a key card to setup the correct time. We contacted the seller but was told they didn't have one and to contact the manufacture. Is there a way I can change the time without one or is there a way I can just purchase the key card?