Question about HP Color LaserJet CM6040f MFP Q3939A Printer

# CM 6040 QUALITY

MY PRINTER CM 6040 IS PRINTING TOO LONG MAPS FOR 4-5 MM ON A3, MY COPYS IS DO NOT HOLD DIMENSIONS TO CAN YOU HELP ME?

Posted by Anonymous on

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
Goodluck!

Posted on Jan 02, 2017

dear use hp 1220c driver instead of 1280
the problem will be sorted-out

Posted on May 05, 2009

×

my-video-file.mp4

×

## Related Questions:

### Sharp r884. Will there be enough space for safety in my housing unit for it which is 570 MM. Wide, 315 MM high, 580 MM deep.

Dimensions (WxHxD): 52x30.9x48.8 cm - Should fit in your space, however ... this doesn't leave much room for air flow unless there are vents in the back. There must be somewhere for the hot air to go.

Jul 25, 2016 | Sharp Microwave Ovens

### What is volume in litres of a bag 230mm dia x 450mm long?

You give only two values for the dimensions, so it must be a cylinder with a radius r=230/2 mm= 115 mm= 11.5 cm
and a height of h= 450 mm =45 cm
The volume for your right circular cylinder is V=PI*(r^2)*h=PI*(11.5^2)*45 cm^3=?
Divide the result by 1000 to convert the volume to liters (1 L =1000 mL=1000 cm^3)

Jul 03, 2014 | Office Equipment & Supplies

### I have a canon mp 240 and it Prints fine if you only need half of the document. It cuts everything in half! Like it reads the header wrong or blows up the words or make extra spaces. How can I get it to...

I thought maybe you have the paper size set to Landscape rather than Portrait. If not, then you might look at:

http://usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp240#ServiceAndSupport

I did some searching on that site and it yielded the hlep below which may give you some help.

Issue: How do I set my printer so my printout fits the paper size I am using?
Solution: Use the recommended Print Area MP240

Printing Area To ensure the best print quality, the machine allows a margin along each edge of media. The actual printable area will be the area inside these margins.
Recommended printing area (dark blue):
Canon recommends that you print within this area. ()
Printable area (light blue):
The area where it is possible to print. ()
However, printing in this area can affect the print quality or the paper feed precision.

Note
Borderless Printing
By selecting the Borderless Printing option, you can make prints with no margins.
When performing Borderless Printing, slight cropping may occur at the edges since the printed image is enlarged to fill the whole page.
For Borderless Printing, use the following paper.
- Glossy Photo Paper "Everyday Use" GP-501
- Photo Paper Glossy GP-502
- Photo Paper Plus Semi-Gloss SG-201
- Photo Paper Pro Platinum PT-101
- Photo Paper Plus Glossy II PP-201
-Photo Paper Pro II PR-201
- Matte Photo Paper MP-101
Performing Borderless Printing on any other type of paper may substantially reduce printing quality and/or result in printouts with altered color hues.
Borderless Printing on plain paper may result in printouts with reduced quality. Use them only for test printing. You can perform Borderless Printing on plain paper only when printing from your computer.
Depending on the type of paper, Borderless Printing may reduce the print quality at the top and bottom edges of the paper or cause these parts to become smudged.
See A5, A4, B5, 4" x 6", 4" x 8", 5" x 7", 8" x 10", Wide.
See Letter, Legal.
See Envelopes.
A5, A4, B5, 4" x 6", 4" x 8", 5" x 7", 8" x 10", Wide
Size
Printable Area (width x height)
A5*
5.56 x 7.95 inches / 141.2 x 202.0 mm
A4
8.00 x 11.38 inches / 203.2 x 289.0 mm
B5*
6.90 x 9.80 inches / 175.2 x 249.0 mm
4" x 6" / 10 x 15 cm
3.73 x 5.69 inches / 94.8 x 144.4 mm
4" x 8" / 10 x 20 cm*
3.73 x 7.69 inches / 94.8 x 195.2 mm
5" x 7" / 13 x 18 cm*
4.73 x 6.69 inches / 120.2 x 169.8 mm
8" x 10" / 20 x 25 cm*
7.73 x 9.69 inches / 196.4 x 246.0 mm
Wide*
3.73 x 6.80 inches / 94.8 x 172.6 mm

Recommended printing area
Printable area
Letter, Legal
Size
Printable Area (width x height)
Letter
8.00 x 10.69 inches / 203.2 x 271.4 mm
Legal*
8.00 x 13.69 inches / 203.2 x 347.6 mm

Recommended printing area
Printable area

Envelopes
Size
Printable Area (width x height)
European DL*
4.06 x 7.12 inches / 103.2 x 180.8 mm
US Comm. Env. #10*
3.86 x 7.96 inches / 98.0 x 202.1 mm

* Envelopes can be used only when printing from your computer.

Recommended printing area

Jun 30, 2011 | Canon PIXMA MP240 All-In-One InkJet...

### Can you replace the printer ribbon on the Seiko DPU414 Printer?

ANSWER: Since it is a thermal printer it does not have a ribbon to replace.

Description:
The Seiko SII DPU 414 thermal Printer. For a compact desktop or portable thermal printer, the DPU-414 is an excellent selection. It incorporates the STP printer mechanism to ensure silent and high-quality printing of characters and high-density graphics. And in quadruple-density bit image mode, 640-dot (maximum) CRT display hardcopy is possible (with horizontal vs. vertical radio of 1:1).

Product Specifications
• Model DPU-414-30B
• Printing Method Thermal serial dot printing
• Number of dots/line 9 x 320
• Paper width (mm) 112
• Printing width (mm) 89.6
• Max Speed (character/sec) 52.5
• Paper path Curved
• Character matrix (H x W dots) 9 x 7
• Character size(H x W mm) 2.5 x 1.9, 2.5 x 0.9 (Condensed)
• Number of columns 40, 80(Condensed)
• Character type Extend Graphics Character set, Alphanumeric, International Characters, Katakana Character set
• Interface Parallel (36pins Amphenol), Serial (9pins D-SUB)
• Input buffer 28Kbytes
• Command ESC/P * conformity
• Cutting Tear bar
• Operating Temperature (°C) 0 to 40
• Humidity (%RH) 30 to 80(Non condensing)
• Service life (line) 500,000 **
• Dimensions (W x D x H mm) 160.0 x 170.0 x 66.5 (printer unit only) ***
• Mass (g) Approx.580(without Battery)
• Compliance FCC, CE, VCCI
Manual:
http://sii-thermalprinters.com/pdf/manuals/DPU414/DPU-414_User_Guide.pdf

Feb 13, 2011 | Seiko Office Equipment & Supplies

### I am getting paper jam error message after I try to print on photo paper

Some printers detect the type of paper you are using, and print accordingly. Do you have photo cartridges installed? If not, that will trigger an error message. Try putting a smaller amount of sheets in the paper feed- that can sometimes trigger an error message, I've read in reviews. Double check the printer to make sure there, indeed, isn't a paper jam. The type of paper one uses with certain printers can be an issue, so google your printer make and model number and then type something like suggested paper type, or things similar, and you will get some sites that discuss problems with different printers and paper types, and also suggestions of which paper will work well with which printer.
I couldn't find any specific information since I didn't have a make and model number, but hope this general information helps.
Good luck, and thanks for using FixYa.

Sep 07, 2010 | Office Equipment & Supplies

### Printing on custom paper sizes I can not set my a3 printer to print any longer than 42cm x 29.7cm A3, It should be able to print 29.7x 84cm half of a2

The following are the max printable areas for the Canon i9950.
A3+, A3, Ledger, B4, A4, B5, A5, 5" x 7", 4" x 6" Size
Printable Area (width x height)
A3+ (13" x 19")
322.2 x 475.0 mm / 12.7 x 18.7 in
A3
290.2 x 412.0 mm / 11.4 x 16.2 in
Ledger (11" x 17")
272.6 x 423.8 mm / 10.7 x 16.7 in
B4
250.2 x 356.0 mm / 9.9 x 14.0 in
A4
203.2 x 289.0 mm / 8.0 x 11.4 in
B5
175.2 x 249.0 mm / 6.9 x 9.8 in
A5
141.2 x 202.0 mm / 5.6 x 7.9 in
5" x 7" / 127.0 x 177.8 mm
120.2 x 169.8 mm / 4.7 x 6.7 in
4" x 6" / 101.6 x 152.4 mm
94.8 x 144.4 mm / 3.7 x 5.7 in

Borderless printing will allow you to print up to the full size of the paper but no larger than 297 x 420mm for A3 and 330 x 482 mm for A3+.

It is not possible to print on A2 paper.

Oct 13, 2009 | Canon i9950 InkJet Printer

### I need the following info for my 1999 Audi S3 in relation to the tailgate dimensions: Height.......cm; Length........cm; width.........cm; wight.........kg

Exterior Dimensions
Wheelbase
2519 mm
Front Track
1527 mm
Rear Track
1503 mm
Overall length
4159 mm
Overall Width
1763 mm
1415 mm
Ground clearance
n
Unladen weight in kg / gross weight limit in kg
1375 kg / 1935 kg

Nov 05, 2008 | 2005 Audi A3

### Printer Problem in HP-1280 Printer

go to printer folder , select properties and go to paper /quality , browse to A3, select, apply, OK

check print preview before sending your document

May 01, 2008 | HP DeskJet 1280 InkJet Printer

### Dell laser 300cn

is it happening always or sometime, have you check the cartridge

May 01, 2008 | Dell 3000cn Color Laser Printer

### R1800 Borderless Printing Problem

Hi Tom, Have you downloaded the latest driver from the Epson web site. Also make sure the output tray is in the correct position and that you are using the correct paper. You can use the following media with this feature: Matte Paper - Heavyweight A3+, A3, A4 Premium Glossy Photo Paper A3+, A3, A4, 10 x 15 cm (4 x 6 in.), 329 mm x 10 m, 210 mm x 10 m (Roll paper) Premium Semigloss Photo Paper A3+, A3, A4, 329 mm x 10 m, 210 mm x 10 m, 100 mm x 8 m (Roll paper) Archival Matte Paper A3+, A3, A4 Watercolor Paper-Radiant White A3+ Velvet Fine Art Paper A3+ Ensure the output tray is in the correct position as if the tray is too low and the paper "falls" down into the tray the weight of the paper could pull the last few millimeters of paper out of the exit rollers, causing the band.

Aug 15, 2007 | Epson Stylus Photo R1800 InkJet Printer

## Open Questions:

#### Related Topics:

22 people viewed this question

Level 3 Expert

Level 3 Expert