Question about Sharp AL-1217 Copier
How can I fix it. Thank you
Posted by Anonymous on
Heat roller abnormally high
Check the heater lamp blinking
with SIM 5-2.
When the lamp blinks normally:
Check the thermistor and the
harness. Check the MCU PWB
thermistor input circuit.
When the lamp lights up instead
Check the lamp control circuit of
the power supply PWB and the
Clear the trouble with SIM 14.
Posted on Apr 21, 2016
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: H3 ERROR CODE SHARP AL 1631
00:TEMPERATURE OF FUSER UNIT HIGH,THERMISTOR CONTROL BOARD FAILING
Did you replace the thermistor? check the thermofuse also for continuity
Posted on Oct 20, 2008
SOURCE: flashing "L1" error
A letter "L" and a number "1" appear alternately = The scan head locking switch is locked. Unlock the scan head locking switch.
Hope this helps. Good luck.
Posted on Dec 11, 2008
H3 is a heater/fuser problem. Try to reset it by SIM 14. Press Clear , auto exposure, Clear and auto exposure and press copy key. check if H3 has been reset and LED is back to "00".
Posted on Nov 05, 2009
try the driver for AR123E at
Supported Models AR-123E, AL1045, AL1216, AL1225, AL1255, AL1530CS, AL1540CS, AL1456
Posted on Nov 20, 2009
Tips for a great answer:
Jun 10, 2010 | Sharp AL-1217 Copier
Feb 06, 2010 | Sharp AL-1217 Copier
Oct 29, 2009 | Sharp AL 1631 Copier
Feb 09, 2009 | Sharp AL-1217 Copier
Oct 31, 2008 | Sharp AL-1217 Copier
Jul 28, 2008 | Sharp AL-1217 Copier
Dec 17, 2013 | Sharp AL-1217 Copier
33 people viewed this question
Usually answered in minutes!