Question about Oki Electric Industry C8600n Led Printer

1 Answer

Registration error 3 - Oki Electric Industry C8600n Led Printer

Posted by Anonymous on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 79 Answers

When a color registration error is detected with coarse
adjustment, or with the main-scan line adjustment.
PU firmware does not notify this warning to CU firmware
at the time of Shipping Mode. Therefore, this status
does not occur in a user environment.
n
2 = Yellow
3 = Magenta
4 = Cyan

Posted on Dec 17, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

My Amazon echo keeps saying registration error 10:2:12:3:1 & won't let me do anything. Is there a way around this. Thanks


It means your device is locked from registration by Amazon. Either it's considered stolen or a return in transit. You will need to call amazon customer service and have then connect to echo team. That's how I had it resolved. I had a return that I decided to keep - but when initially requested a return, it was deactivated by them.

Mar 01, 2017 | Amazon Computers & Internet

1 Answer

Canon2202ir E0000-000 This error code deals with the fuser unit. It is saying that the fuser is not warming up. It needs to be reset in service mode.


How can I enter service mode on canon ir 2202? - Fixya

www.fixya.com/.../t25374950-any_one_help_me_enter_service_mode_...
Jan 19, 2015 - In standby mode, press the "Settings/Registration" key. 2. Press the "Reset" key. 3. Press the "Back" key. 4. Press the "Settings / Registration" ...

Error Code ir 2202n - CopyTechNet.com

www.copytechnet.com > ... > Copier Technical Discussion > Canon

Nov 22, 2014 - 3 posts - ‎2 authors
... pls help me ....i know how to enter service mode but ......pls help. ... Copier Technical Discussion · Canon. [Error Code] ir 2202n ... ir 2202n. how to print jam history in ir 2202.......i dont know pls help ... mm its a new machine , i need to know how to enter the service mode if u please ... Press the "Reset" key. Error Code canon image ronner 2202N
3 posts
Aug 21, 2014
Canon IR 2200 error E000001-002
8 posts
Jun 18, 2009
More results from www.copytechnet.com

Dec 21, 2015 | Office Equipment & Supplies

1 Answer

Oki c8600 registration error 3


Registration Error 3
When a color registration error is detected with coarse
adjustment, or with the main-scan line adjustment.
PU firmware does not notify this warning to CU firmware
at the time of Shipping Mode. Therefore, this status
does not occur in a user environment.
n
2 = Yellow
3 = Magenta
4 = Cyan

Dens Shutter Error 2
DENS SHUTTER ERR
Check 3: Check to see whether the sensor shutter opens and closes normally, by the
MOTOR & CLUTCH TEST of the self-diagnostic function. If the shutter operates
imperfectly, replace the shutter unit.

May 06, 2014 | Oki Electric Industry C8600n Led Printer

1 Answer

I get an error on startup saying windows is having trouble with my license


There are 3 possible options which comes to my mind :

1) An illegal Windows registration-key is used at your computer.

2) The (il)legal registration key at your computer got used at multiple computers.

3) You might have re-installed Windows at your PC and started another online-registration with the same key.

Oct 14, 2013 | HP Pavilion m200y (516673) PC Desktop

1 Answer

Registration ERROR 10014


ncomputing l230 i cant register because i loss this product key so registration prosess not complit properly please help me

Jul 03, 2011 | NComputing X300 3 User Expansion Kit...

1 Answer

Define 54.18 ERROR code on a Hp Laserjet 5500


According to the HP Service manual, there is no 54.18 error.

The listed errors are:


54.1 Temperature error
Check the fuser. See 50.X fuser error.
54.3 Image density sensor error
Check the connections. Replace the color registration detection assembly.
54.5 Colour registration sensor error
Check the connections. Replace the color registration detection assembly.
54.6 Image density error
Check the connections. Replace the color registration detection assembly.
54.7(Y), 54.8(M), 54.9(C), or 54.10(K) Drum phase sensor error
Check the connections. Replace the drum phase sensor for the indicated color.
54.11(K), 54.12(C), 54.13(M), or 54.14(Y) Toner sensor error
Check the connections. Check the cartridge and replace it if necessary.
Replace the color registration detection assembly.
54.19 Transfer Belt error
Check the ETB connection. Replace the ETB. Replace the DC controller.

It is most likely that you have a faulty Toner Cartridge.

Jun 21, 2010 | HP Color LaserJet 5500 Printer

2 Answers

Can not rec a dial tone, phone states no link to base move closer



If “No link to base. Move closer to base, try again.” is displayed
even when using the handset near the base unit, the handset may have lost communication with the base unit. You need to re-register the handset to the base unit.
• Make sure the base unit is not being used.
• Have both handsets and base unit nearby during registration.
• Follow steps 1–3 listed below. You have about 1 minute to complete them.
• Confirm the extension number of the handset which has lost the communication by placing the handset on the base unit or charger.
If you re-register the handset using the other handset’s extension number, the other handset will not function.
• If the handset beeps 3 times and “Error!!” is displayed, an error occurred. Try again from step 1.
• You can stop registration by pressing [OFF] on the handset, and pressing [LOCATOR/INTERCOM] on the base unit.

1 Base unit: Press and hold [LOCATOR/INTERCOM] until a beep sounds.
• The CHARGE indicator flashes.

2 Base unit: Press the extension number [1] (handset symbol 1 ) or [2] (handset symbol 2) of the
handset which has lost the communication.

3 Handset: Press and hold [FLASH/CALL WAIT] until “Handset Registering” is displayed.
• When registration is complete, a beep sounds from the handset and the display shows the number.
• Wait for 20 seconds after registration is complete while the handset establishes communication with the base unit.


• If the handset beeps 3 times and “Error!!” is displayed, an error occurred. Try again from step 1.
• You can stop registration by pressing [OFF] on the handset, and pressing [LOCATOR/INTERCOM] on the base unit.

Feb 23, 2010 | Panasonic KX-TG2357 Cordless Phone

1 Answer

Error code 000051


From service manual E051-0000 At start-up, home position is not detected when the horizontal registration assembly is moved 100 mm in the direction of home position.
Main cause The horizontal home position sensor is faulty. The horizontal registration motor is faulty. The DC controller PCB is faulty.
Action
1. Connector
Are the connectors of the horizontal registration home position sensor and the horizontal registration motor connected?
a. DC controller PCB (J304) <-> relay connector <-> horizontal registration home position sensor
b. DC controller PCB (J304) <-> relay connector <-> horizontal registration motor
NO: Connect the connectors.
2. Sensor lever (damage and interference), Sensor
Is abnormal noise heard from the horizontal registration assembly in keeping with the motor rotation?
YES: a. The horizontal registration assembly is out of place because of
damage to the sensor lever. Replace the sensor lever.
b. The horizontal registration assembly malfunctions because of the
presence of foreign matter. Remove the foreign matter.
c. The sensor is faulty and cannot detect home position. Replace the
sensor.
3. Horizontal registration motor, DC controller PCB
Is the horizontal registration motor control signal generated by the DC controller PCB?
J304-1/2: 24 V, J304-3/4/5/6: motor excitation signal
YES: The horizontal registration motor is faulty. Replace the motor.
NO: Replace the DC controller PCB. Usually E 051 is the horizonal motor problem, you can take out the pick up ***'y. On the motor have a small gear, sometime this gear broken.
Or the horizontal reg motor became stuck in the wrong position. I was able to manually move it back and rebooted copier. Not sure why the motor was in the wrong position-cust related?

Oct 10, 2009 | Canon imageRUNNER 3300 All-In-One Laser...

1 Answer

Error : e051


This error occured when -

The home position cannot be detected after the horizontal registration signal has been sent.

because -

1.The horizontal registration sensor (PS10) has a fault
2. The Horizontal registration motor (M9) has a fault.
3. The DC controller pcb has a fault.

To solve first check sensor & motor

Feb 09, 2009 | Canon imageRUNNER 400S Copier

2 Answers

Need help registering the GE additional cordless model 27911.


I had the same problem but I fixed it by:

1. Disconnect the battery on the handset.
2. Wait 1 minute and reconnect.
3. Register handset.

Jan 10, 2009 | Uniden Cordless Phone

Not finding what you are looking for?
Oki Electric Industry C8600n Led Printer Logo

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oki Electric Industry Office Equipment & Supplies Experts

Fix It Fast...
Fix It Fast...

Level 2 Expert

106 Answers

Don  Farrell
Don Farrell

Level 3 Expert

1018 Answers

Victorman
Victorman

Level 3 Expert

838 Answers

Are you an Oki Electric Industry Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...