Question about Admiral Washing Machines

1 Answer

Admiral washing machine no cold water

The washing machine worked after the plumber left the other day,
then is stopped working, and now it is working again. It has to be the
washing machine ..not working properly. Sometimes it allows the cold
water to come through, sometimes it does not. The plumber did remove
washers that stopped the loud sound always coming from the machine ..so
all not lost there ..but the washing machine cold water only works about
30% of the time. Plumbers came back said it's the machine

The model is:

Admiral Designer Series
Heavy Duty 20 lb / 2 speed
giant capacity plus
Model #: LNC6744A71
Serial #: 49H407413

How do we get the cold water to flow 100% of time?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,784 Answers

HI, this is a faulty inlet valve assembly. you should replace this failing component asap if possible.This will fix the issue.

Posted on Jun 22, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cold water not pulling into Fisher & Paykel 5.5kg Smart Drive Pride.


Either the cold water inlet solenoid has failed or there is a fault with the electronic control module, Unfortunately the only way to find out is to replace the cold water solenoid and see if it works, if it doesn't then the electronic control board is faulty.

Mar 16, 2017 | Fisher Washing Machines

1 Answer

Why no cold water flow?


Could be water pressure isn't strong enough not fully open or inlet hose is clogged, bent or frozen. The screen on the hose could be clogged

Jul 23, 2015 | Admiral Washing Machines

1 Answer

My admiral washer will not fill up with water nor will it wash


Hello Melyssa

Have you tried both hot & cold water?
different settings?
stop mid cycle?
need more info

Jun 10, 2015 | Admiral Washing Machines

1 Answer

Fix washing machine


WASHER WILL NOT RINSE:
If your washer doesn't go through the washer rinse cycle, the most likely cause is the water valve. What happens is the water valve will stop letting cold water into the washer; therefore, once the washer gets to rinse it will either stop or not do anything during the whole rinse cycle.
This is because when you selected your water temperature, you selected warm/cold or hot/cold. The hot water came in and you didn't notice any problems. When it got to rinse, the cold water the cold water won't come in. Therefore, the washer does nothing.
To check the water valve, first cut the water off and remove the hoses off the back of the washer. Then one at a time point the hoses inside the washer tub and turn the water back on. If you don't have good water pressure, turn the water back off and remove the strainer that should be in one end of the hose. Inspect the strainer to see if it is stopped up, clean it and reinstall it. Now repeat this test. If you have good water pressure now, reinstall hose and your problem is fixed.
If you still don't have good water pressure, the problem is in your house plumbing and you need to call a plumber. If you had good water pressure the first time you performed the test, the water valve is bad and needs replacing.
TIMER
If your washer doesn't go through the washer rinse cycle the timer may be the problem. Sometimes the timer gets stuck in the middle of the cycle or won't turn at all. If the washer runs, but the timer doesn't turn, the timer is bad and needs replacing.
Do you have anti-flood hoses leading to the machine. If you do there is probably a loose tube in the back causing a small leak. When the hoses detect that water is still flowing after a certain amount of time due to the leak it shuts down and causes the machine to turn off during the rinse/spin cycle

Mar 31, 2015 | Admiral Washing Machines

1 Answer

After 2 yrs. the cold/cold selection doesn't work at all but the other selections give me hot h2o only. Also, rinse cycles just stopped working!


Your water inlet valve has 2 electric coils on it. One for hot --one for cold. The cold is probably bad. Most newer machines use COLD rinse only so if no cold fill it just stops in the rinse cycle. Replace the inlet valve which is the part on the machine back the hoses hook to.

Mar 23, 2015 | Admiral AW22 Top Load Washer

1 Answer

I have an Admiral washer model LNC6757A71 and the cold water doesn't work. It will wash on hot but no water comes out on cold and only hot comes out on the warm setting ? Please help


replace the solenoid on the cold water inlet as the coils burn and the unit will not activate.. Go to the dealer for spares taking the model number and ask for a cold water solenoid unit.

Aug 17, 2013 | Admiral Washing Machines

1 Answer

Washer fills with hot water on cold wash or rinse. Turned off the hot water supply during cold cycle and machine stopped filling. Checked that the hoses were connected to right inlet valve and they are.


typically hot is on the left and cold is on the right at the house faucets but in some cases they are reversed so if filling with a cold setting and the right side supply is hot the plumber reversed the lines when the house was built which while its semi rare has been seen numberous times

Sep 26, 2011 | Whirlpool GHW9250M Front Load Washer

1 Answer

Cold water wash and rinse not working.


check the screens on the water inlet valve and or replace the valve

May 19, 2009 | Admiral AW22 Top Load Washer

1 Answer

My Admiral Washing machine only runs the hot water (not cold)


the water temp switch is bad call aplience parts store in the area

Nov 25, 2008 | Admiral AW22 Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

316 people viewed this question

Ask a Question

Usually answered in minutes!

Top Admiral Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Brad Brown

Level 3 Expert

15645 Answers

Sal DeAngelo

Level 3 Expert

2180 Answers

Are you an Admiral Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...