Question about Samsung SCX-4216F All-In-One Laser Printer

1 Answer

Why do my SCX 4216F printer shows a low toner message even after changing the cartridge

I just change my toner cartridge because the icone was showing "low toner". So I put a new one and it still show "low toner", even with my new cartridge. What can I do? I can't print a test page, I turn off/on many times my printer but the problem still there. Low toner. Please help me?

Posted by Anonymous on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Samsung Expert
  • 167 Answers

Replace fuse chip in toner

Posted on Oct 02, 2015

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: printer

You will need to manually reset the toner cartridge.
If the Toner Low or Toner Empty message does not automatically clear after a new cartridge is installed, do the following to clear the message manually:

  1. Press MENU # 1 9 3 4 in sequence rapidly. The LCD panel should now display TECH.
  2. Press MENU, and then press ENTER. The LCD panel will display Tech Mode.
  3. Press the left arrow (<) button once. The operator panel will display NEW CARTRIDGE.
  4. Press ENTER. The operator panel will display [YES].
  5. Press ENTER. The toner warning message should be gone.
  6. To exit TECH MODE, press MENU # 1 9 3 4 in rapid succession, as if you were dialing a phone number. The operator panel should no longer display TECH.
  7. If problem persists, there may actually be a problem with either the toner cartridge or the SCX-4216F.

Posted on Sep 12, 2008

anjana03
  • 361 Answers

SOURCE: when i turn on my printer theres a message appear toner low

in your cartage have green cheap or fuse these are reseter. the are aviable in market .change it . then your printer can work. when are u getting tonner low. recently u shuld fill cartage. i think you get empty message. just reseting cartage by new reseter than u can change old reseter. u can 100% solve your problem thanks

Posted on Jun 19, 2009

  • 108 Answers

SOURCE: Toner empty message

I would try to unplug the printer and leave off for a few minutes. and see if that resolves the problem.

Posted on Jul 30, 2009

  • 76 Answers

SOURCE: New cartridge saying low toner

Try these steps:
1. Press MENU # 1 9 3 4 in sequence rapidly. The LCD panel should now display TECH.
2. Press MENU, and then press ENTER. The LCD panel will display Tech Mode.
3. Press the left arrow (<) button once. The operator panel will display NEW CARTRIDGE.
4. Press ENTER. The operator panel will display [YES].
5. Press ENTER. The toner warning message should be gone.
6. To exit TECH MODE, press MENU # 1 9 3 4 in rapid succession, as if you were dialing a phone number. The operator panel should no longer display TECH.
Let me know if it doesn't work as there is another possible solution.

Posted on Sep 01, 2009

  • 2 Answers

SOURCE: Toner exhausted replace toner in Laser Printer SCX-4300

My laser Printer shows a message and do not prints any document. When i try to print any document. My printer shows a message "Toner Exhausted, Replace Toner". Plz tell me how can i solve my this printer's solution.

Posted on Feb 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Problem with Starting, Samsung SCX-4521F. always show in display ,Warmingup please wait, printer triying to starting, main moter working, but faild,.


There is a problem with the cardrige.

1. Press MENU # 1 9 3 4 in sequence rapidly. The LCD panel should now display TECH.
2. Press MENU, and then press ENTER. The LCD panel will display Tech Mode.
3. Press the left arrow (<) button once. The operator panel will display NEW CARTRIDGE.
4. Press ENTER. The operator panel will display [YES].
5. Press ENTER. The toner warning message should be gone.
6. To exit TECH MODE, press MENU # 1 9 3 4 in rapid succession, as if you were dialing a phone number. The operator panel should no longer display TECH.

If problem persists, there may actually be a problem with either the toner cartridge or the SCX-4216F.

Apr 16, 2011 | Samsung Office Equipment & Supplies

1 Answer

Clear


My laser Printer shows a message and do not prints any document. When i try to print any document. My printer shows a message "Toner Exhausted, Replace Toner". Plz tell me how can i solve my this printer's solution.

Feb 15, 2010 | Samsung SCX-4216F All-In-One Laser Printer

1 Answer

3 month old machine, low print usage, showed "Replace Toner". Replaced with Samsung cartridge but still showing Toner Empty message. Replaced with another new Samsung toner, but message will not go away....


you need to reset printer thorught software

We have Zero cost solution for samsung -scx-4300, ml-2240,ML
2245, ml 1640. clp 310/ 315, It is working permenently.
Refill cartridge is working for ever. which is running successfully.
also provide other new model reset solutions.

www.nakshatraworld.com

mob: 9713862555, 9893282285
vivekryp@yahoo.co.in

Nov 02, 2009 | Samsung SCX-4300 Monochrome Laser...

1 Answer

My copy machine is scx-4216, want to get clear copy, just advise


Most problems with this printer are resolved when changing the toner cartridge, as the cartridge contains parts which deteriorate with age. Change the cartridge and see if the problem is still there

Aug 21, 2009 | Samsung SCX-4216F All-In-One Laser Printer

7 Answers

Toner exhausted replace toner in Laser Printer SCX-4300


My laser Printer shows a message and do not prints any document. When i try to print any document. My printer shows a message "Toner Exhausted, Replace Toner". Plz tell me how can i solve my this printer's solution.

Mar 25, 2009 | Samsung SCX-4300 Monochrome Laser...

1 Answer

How to turn off "toner Low"


THE PROBLEM IS IT IS DUE SOME SERVICE REQUIREMENT, THE CORRONA WIRES MAY NEED TO BE CLEANED, THE TONER USED CONTAINER MAY NEED SOME SERVICE, THE ROLLERS AND MACHINE MAY NEED DRUM CLEANED OUT, PRINT GET SERVICED AND THE SERVICE PERSON RESETS THE COPIERS DATA SO THE COPIER WILL NOT HAVE FUNCTION ERRORS AND BROKE DOWN MORE OFTEM DUE TO NOT BEING SERVICED ON A MONTHLY SERVICE, TONER CONTAINER MAY A FORIEGN MATTTER IN THE TONER TANK AND CAUSING THE SYSTEM THE TONER CARTAGE IS MALFACTION ERRORS.
IT HAS BEEN AWHILE SINCE I SERVICED A COPY MACHINE, SINCE 1980.

ROD

Feb 02, 2009 | Office Equipment & Supplies

1 Answer

Printer


You will need to manually reset the toner cartridge.
If the Toner Low or Toner Empty message does not automatically clear after a new cartridge is installed, do the following to clear the message manually:
  1. Press MENU # 1 9 3 4 in sequence rapidly. The LCD panel should now display TECH.
  2. Press MENU, and then press ENTER. The LCD panel will display Tech Mode.
  3. Press the left arrow (<) button once. The operator panel will display NEW CARTRIDGE.
  4. Press ENTER. The operator panel will display [YES].
  5. Press ENTER. The toner warning message should be gone.
  6. To exit TECH MODE, press MENU # 1 9 3 4 in rapid succession, as if you were dialing a phone number. The operator panel should no longer display TECH.
  7. If problem persists, there may actually be a problem with either the toner cartridge or the SCX-4216F.

Jul 14, 2008 | Samsung SCX-4216F All-In-One Laser Printer

2 Answers

Samsubg scx-4216f


sounds like a problem with your fuser allso called a fixing unit.

Feb 27, 2008 | Samsung SCX-4216F All-In-One Laser Printer

1 Answer

Samsung scx-4216f


try this,
Fehl.ATM-fixing. in this case the toner cartridge is not properly used in the device. Take the cartridge out of the device and put them, as described in the instructions. or in SCX 4216 when the count is not automatically reset, you can count manually by the following key combination reset:
Menü Menu
#
1
9
3
4

thnx N

Jan 30, 2008 | Samsung SCX-4216F All-In-One Laser Printer

Not finding what you are looking for?
Samsung SCX-4216F All-In-One Laser Printer Logo

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Office Equipment & Supplies Experts

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

HEMANT GROVER

Level 2 Expert

167 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Samsung Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...