Question about Tuttnauer EZ10 Automatic Sterilizer/Autoclave with Printer

2 Answers

WHY IS MY EZ 10 GIVING A LOW HEAT CODE - Tuttnauer EZ10 Automatic Sterilizer/Autoclave with Printer

Posted by Anonymous on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

  • Expert
  • 55 Answers

Steam leak trought some parts or damages in heating elements...

Posted on Jan 04, 2015

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 25 Answers

Message is displayed and sterilization does not start if the autoclave has not reached sterilization temp. after heating for 50 mins. while in wrapped or unwrapped programs (80 mins in the Glassware program).

1) Clogged air jet, clean air jet.

2) no pwer to the heating elements.

3) Low line voltage delaying heat up. Not enough power to supply unit.

Posted on Oct 29, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My heater raypack 407A is giving the message lonox tap default


PDF]raypak replacement instructions - Pool Supply Unlimited

https://www.poolsupplyunlimited.com/.../136118_20111116132043.pdf
type of heating equipment and related system components. Installation and .... Low NOx MODELS 207A, 267A, 337A & 407A ONLY: PREPARE ... Locate Low Nox taband P-10 air switch terminal on the board as shown in Fig. ... The latest fault code will be displayed ... Resets board to factory default settings. Resets faults in ...

Nov 08, 2015 | Pool & Spa

1 Answer

Error code 10


You could try giving us a model number, there is more than one Krups Espresso maker. One error code 10 that springs to mind is either not heating or the sensor that detects the heat is detached, broken or disconnected.

Jul 09, 2014 | Krups Small Appliances Espresso Machine

1 Answer

Xerox 1250


10 355 and 10 356
355 external heat roll sensor did not go low within 5 seconds and 356 ext. heat roller did not go high after 5 seconds
the sensor sits by the web motor check the flag is not missing the sensor will go bad as well.
good luck

Mar 04, 2014 | Office Equipment & Supplies

1 Answer

Service manual of riso Ez 231 E


Please I need a solution to riso ez 231 p-96-569

Jan 23, 2013 | Riso Office Equipment & Supplies

1 Answer

My chevy S 10 1987 is giving me a code its 34


The MAP sensor. Voltage from the MAP sensor is too low. Could be the MAP sensor is bad. Also check for any vacuum leaks.

Mar 17, 2010 | 1987 Chevrolet S-10 Pickup

1 Answer

Heat/Cool gauge fluctuates inconsistently


You might check the coolant level after the engine cools,if it's low add 50/50 mixture of coolant and water. Keep an eye on the level to see if it happens again. You might have a small leak in the system. Good luck


Jan 18, 2010 | 1998 Volvo S90

2 Answers

"LOW HEAT ERROR"


you have to change lamp (or rezistance) heater located under drum ink, down drum film.
if you now what i are saying probably you can do yourself servicing . just ask for your printer model lamp heater (or rezistance). if not get your printer serviced befor destry him.

Apr 06, 2009 | Xerox M20I Printer

1 Answer

Oven giving me a f-10 message


Hi.
Although I am not familiar with this model, it sounds like an overheating problem to me, could be a faulty thermostat, and the error code could be a warning of this.
Sorry I can't help you further. Please leave feeedback

Nov 30, 2008 | Ovens

Not finding what you are looking for?
Tuttnauer EZ10 Automatic Sterilizer/Autoclave with Printer Logo

Related Topics:

414 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tuttnauer Science & Laboratory Experts

William McMath

Level 2 Expert

178 Answers

kakima

Level 3 Expert

102366 Answers

Tom Chichester

Level 3 Expert

33294 Answers

Are you a Tuttnauer Science and Laboratory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...