Question about Heating & Cooling

Open Question

Hotpoint HPS23F error code E8

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

blueextc3221
  • 15935 Answers

SOURCE: E8 error code

8E - OVER CURRENT ERROR
IPM fault signal (this is caused by the overload of the MICOM INTO during motor action).

IPM: Integrated power module. The IPM controls the motor.

If the fault (low signal) happens to be sensed even once during the washing/rinsing stage, the motor stops immediately. However, during the dehydrating stage the signal is to be sensed, when the number of signals reads more than 6 per 500ms during the Washing or Rinsing cycle action.

If the motor stops working, in one direction ten times, "8E" Error is displayed.

During dehydrating, when the overload is sensed, the motor stops working at once and then feeds back to the initial stage of the dehydration unbalance sensing. When the feed back has occcurred twice, Error "8E" is displayed during the dehydrating unbalance sensing, No error happens by overload sensing. When it happens at more than 800rpm, the process is stopped compulsorily. Power Switch OFF can clear the overload error.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Babylock rachel.... when I turn my stitch dial to 2 I get an e8 error, what does that mean my machine is brand new?


If it's brand new, take it back where you purchased it. It should be covered under store policy or warranty.

The manual usually describes error codes in the troubleshooting section. Or, you can search online:

Make + Model + the words "error code E8"

...

Nov 09, 2016 | Sewing Machines

1 Answer

Hotpoint air conditioner model HPS23F is not working


You have to try resetting the system. First turn the breaker off for the condenser and wait about 20 seconds. After you turn it back on the system should reset. If you need any other help check out AC Repair Boca Raton we got you covered

Jun 22, 2016 | Heating & Cooling

1 Answer

Thank would guide me about this problem: my freezer frigidaire ffu17f5hwd tells me E8, referred this error


Good Afternoon edgar corro, thanks for your post!
Based off the information you have provided your Frigidaire freezer is displaying an error code "E8". An "E8" error code typically stands for a shorted thermistor this could be a possible miscommunication with the wiring harness, control board, or thermistor. Since it could be anyone of these underlying issues I would suggest contacting a professional technician since they have the appropriate tools to pinpoint the parts needed for repair. Best of luck! -Matt

Feb 05, 2015 | Frigidaire Freezers

1 Answer

Error E8 HP Laserjet MP1136


See this... http://h30434.www3.hp.com/t5/Other-Printing-Questions/m1132-hp-printer-gives-me-e8-error-code-is-it-expensive-too/td-p/907661

Jul 04, 2014 | HP Office Equipment & Supplies

2 Answers

Hp laserjet 1132 mfp e8 error code, how do i solve this


Hi Abu Bakarr.

The e8 error is refering to problems with the CIS Scanner. I have attached a link to the product service manual. Read page 122 about the e8 error and perform the 4 steps in the manual to fix the problem. If no luck, the CIS Scanner needs to be replaced. Good luck. http://www.feedroller.com/store/Service%20Manual/HP_LJ_M1130_M1210_Manual.pdf

Jan 10, 2014 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

Errorcode EE in display. Whats wrong?


E1 - Freezer thermistor open circuit.
E2 - Freezer thermistor short circuit.
E3 - Fridge thermistor open circuit.
E4 - Fridge thermistor short circuit.
E7 - Evaporator thermistor open circuit.
E8 - Evaporator thermistor short circuit.
E9 - Temperature set switch open circuit
EA - No feedback from Baffle
EB - Fridge Baffle motor operating continuously
EE - Defrost time out

This was the only code listing with an EE error code - which is a Hotpoint - so if your's isn't a Hotpoint it is probably incorrect.

If you do have a Hotpoint Refrigerator then either the defrost timer is not functioning correctly or your heater element is malfunctioning.

Jun 20, 2011 | Refrigerators

1 Answer

Hotpoint Mistral Fridge Freezer, freezer working fine at -22 degrees, however, fridge has stopped working and is on +19 degrees. Had an E8 error message a few weeks ago which was quick fixed with a turn on...


Evaporator thermistor is on the radiator located at the back of the fridge. Older fridges had a big on aircooled along the entire back of the fridge whilst the newer ones have it under the fridge with a fan cooling it. 90% of the time the fan gives up causing this type of issue.

Jun 28, 2017 | Refrigerators

Not finding what you are looking for?
Heating & Cooling Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Heating & Cooling Experts

paulcarew

Level 3 Expert

2454 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Donni Steen

Level 3 Expert

659 Answers

Are you a Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...