Question about Hobart 41 in. AM14-255 Free-standing Dishwasher

Open Question

I have a hobart AM14 dishwasher that doesn't display the rinse temperature when it does the rinse sycle

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 110 Answers

SOURCE: Hobart dishwasher Am14, rinse cycle is too short.

no rinse time can't be adjust on the am-14 modelit is built in main board non variable

Posted on Jan 11, 2010

Ad
  • 110 Answers

SOURCE: is it possible to extend the rinse cycle on a

no the rinse time is non-adjustable it is built into the main control board

Posted on Jan 16, 2010

  • 119 Answers

SOURCE: hobart dishwasher am14 displays 255 in temp window

The wash thermistor is shorted. The float and probe assembly in the wash tank should be replaced.

Posted on Jul 19, 2010

  • 44 Answers

SOURCE: Good morning, I have 01 Hobart dishwasher AM14, i

294692 for the rinse probe.
"temperature sensor for booster heater"? Do you mean the thermostat? If so, part number is 274161.

Parts breakdowns and part numbers are available at www.hobartservice.com. Click "Parts" on the left, then click "Hobart SmartParts System" on the next page. You'll be asked a series of questions to identify your piece of equipment, and then you'll get a parts list and have links to parts breakdowns for various sections of the machine.

Posted on Dec 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Time program for Dishwasher Hobart m14


Depends on the version of the control board. If its the original, with a large heat sink near the center you can only adjust the rinse lenght by adding a jumper. Look on the right side near the middle to top. you will see a place to add the jumper in a set of pins, near where the jumper is for low or high temp options.
If it's the new style, you can short the two pins and go into factory service mode. Use the buttons on the board to advance through the options while monitoring the display. the Up arrow will incriment through each option. Powering off will save the changes.

Jan 29, 2014 | Hobart AM14-253 Free-standing Dishwasher

1 Answer

AM14 Display will stay in Rinse Cycle


see this probably causes:
Water-heating cycle
the heating will be importante, test the hot water, and heating elements
Timer
test the timer for contact, and probably defective.see the diagram attached.



5_8_2012_12_07_22_am.gif5_8_2012_12_07_58_am.gif

May 07, 2012 | Hobart AM14-253 Free-standing Dishwasher

1 Answer

Where is the high temperature rinse thermostat located


you need 180 degree water to the unit from the water heater unless it has its own heater.

Jan 12, 2011 | Hobart AM14-253 Free-standing Dishwasher

1 Answer

Good morning, I have 01 Hobart dishwasher AM14, i need to be replace rinse sensor probe and temperature sensor for booster heater.But I can't to find Hobart part number Please help me.Thank you.


294692 for the rinse probe.
"temperature sensor for booster heater"? Do you mean the thermostat? If so, part number is 274161.

Parts breakdowns and part numbers are available at www.hobartservice.com. Click "Parts" on the left, then click "Hobart SmartParts System" on the next page. You'll be asked a series of questions to identify your piece of equipment, and then you'll get a parts list and have links to parts breakdowns for various sections of the machine.

Nov 20, 2010 | Hobart AM14C-155 Dishwasher

1 Answer

Hobart dishwasher Am14, rinse cycle is too short. Can it be adjusted?


no rinse time can't be adjust on the am-14 modelit is built in main board non variable

Dec 01, 2009 | Hobart SR24C-4 Dishwasher

2 Answers

Hobart AM-14 water temperature not maintained


Hobart AM-14 will wash and rinse in manual, but not in automatic

Oct 01, 2009 | Hobart AM14-253 Free-standing Dishwasher

1 Answer

AM14 tank heaters--when are they energized?


How hot is the wash temp?It should be 150-165 degrees.The model is an am14 not an am15?I'm hobart tech and repair these units weekly.Let ne know.

Feb 26, 2009 | Hobart AM14-253 Free-standing Dishwasher

Not finding what you are looking for?
Hobart 41 in. AM14-255 Free-standing Dishwasher Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hobart Dishwashers Experts

Jason

Level 2 Expert

211 Answers

yadayada
yadayada

Level 3 Expert

76673 Answers

Garth Jackson

Level 2 Expert

93 Answers

Are you a Hobart Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...