Question about ePaymentSolutions First Data FD100 Credit Card Terminal Refurbished

2 Answers

First data fd100 won't power up - ePaymentSolutions First Data FD100 Credit Card Terminal Refurbished

Posted by on


2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has written 20 answers of more than 400 characters.


    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 154 Answers

You can also call your merchant service provider and ask them to send you a replacement power supply for your terminal type. it is rare that the terminal will "die" check the power sources as answered previously and make sure you turn the connection that goes into terminal as it has a special way to lock in place by simply turning a quarter of a turn.

Posted on Feb 19, 2015

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

  1. Make sure you push that tip fully into the side of the FD100 with your thumb (these are notorious for falling out- that's why they designed a clip on the back corner)
  2. Try a different power source (outlet)/surge protector (make sure its switch is ON/wall plug (different names for same objective) You'd be surprised how many of those can be faulty-EVEN IF other things are working that are connected to the same one, THAT particular one may be faulty, or it could be barely too much load, etc. etc.!!!.Very difficult to prove or trace this type of fault.
  3. Try a different power supply/ power cord/transformer (different names for same part) They can go out, sometimes from a surge, lighting, etc.
  4. If none of that solves it, I am afraid you may have a dead FD100 :(

Posted on May 08, 2014


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Why won 't computer communicate with code checker

Check the cigarette lighter fuse. This is what powers the DLC. If the fuse is good, check and see if the lighter works. If not, you have a bad wire. Code readers have to have power from the car. Most scanners have there own power and will read the computer, unless the data wire is bad or the computer is bad.

Mar 28, 2015 | 1995 Buick LeSabre

1 Answer

My fd100 wont print but thinks it is. also some times it freezes

if you could check the paper that you are using. make sure thermal. also scratch the paper, if a black mark appears this is the side that goes down in the paper holder, if you don't see a black line you don't have thermal paper. also make sure it is credit card machine and not adding machine paper. if you have another roll try that one. if persist. make sure the paper is hitting the thermal reader. there is no ink

Jul 17, 2014 | FirstData First Data FD100 Thermal Paper...

1 Answer

First data fd100 reset

by reset are you wanting to erase the information in terminal or just reboot.

for reboot unplug power for 1 minute plug back in

Jan 24, 2014 | VeriFone OMNI 3200 (P092-101-10) Printer

1 Answer

First data fd100 no display

if the screen is blank and no lights at all, check your power supply, also check the outlet to make sure it is working, if you move it to a known working outlet does it then power on? if not you will have to call your merchant service provider

Jan 12, 2014 | Cell Phones

1 Answer

My first data fd100 wont power up

check the power cables and the power source, make sure all are secure in place.
the terminal needs a power source that came with it, make sure you are using that one.
call msp if you need additional power supply

Jul 01, 2013 | ePaymentSolutions First Data FD100 Credit...

3 Answers

Dell inspiron 1300 won't boot

If you want to keep your important data, use some softwares can solve thewindows won't startproblem most quickly, and no data will lose. Besides, it is very easy, even the people who lack of computer knowledge can deal with windows won't boot issue.

Sep 21, 2012 | Dell Computers & Internet

1 Answer

I need a manual for a FD Mavica, MVC FD100, Serial # 432616

You can download the manual from the manufacturer's web site at

Aug 27, 2011 | Sony Mavica MVC-FD100 Digital Camera

1 Answer

I am trying to set up my First Data FD100 credit card machine to work with RPE, but am having problems doing so.

I don't think this machine will work within RPE. You should verify this with the vendor that sold you RPE. However, you can set RPE to manually accept credit cards and swipe them seperately with the FD100. Everything will report OK, it just takes more steps and more receipt slips.

Or you can set RPE to process with First Data and buy an MSR to attach to PC to swipe cards. Much quicker process and only RPE receipt(s).

If your unsure about setup for either approach, contact me at .

Nov 17, 2009 | Pc America Restaurant Pro Express

Not finding what you are looking for?
ePaymentSolutions First Data FD100 Credit Card Terminal Refurbished Logo

157 people viewed this question

Ask a Question

Usually answered in minutes!

Top ePaymentSolutions Retail Supplies Experts


Level 3 Expert

1646 Answers


Level 3 Expert

102366 Answers

Patrick Tinashe...

Level 2 Expert

592 Answers

Are you an ePaymentSolutions Retail Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides