Question about Xerox WorkCentre 6505N - multifunction fax / copier / printer / scanner color

Open Question

Why does my workcenter 6505 say paper jam open front cover and remove paper, there is no paper

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 19 Answers

SOURCE: Xerox Phaser 8400

iTezen is Now offering Complete On-Site Repair Service of your broken Tektronix / Xerox Phaser Printer at a flat rate. Basically we repair any problem you may be having with your Phaser Printer for a flat rate. The flat rate covers cost of parts, labor and travel expenses. The flat rate is all you will pay to get your printer back in order. No hidden fees or charges. We show up! We Repair it. You pay us the rate for you model.

Our Flat Rates:
MODEL: Tektronix Phaser 840 Color Printer Repair - $159
MODEL: Tektronix Phaser 850 Color Printer Repair - $159
MODEL: Xerox Phaser 860 Color Printer Repair - $159
MODEL: Xerox Phaser 8200 Color Printer Repair - $159
MODEL: Xerox Phaser 8400 Color Printer Repair - $179
MODEL: Xerox Phaser 8500 Color Printer Repair - $199
MODEL: Xerox Phaser 7700 Color Printer Repair - $209
MODEL: Xerox Phaser 7750 Color Printer Repair - $249
MODEL: Tektronix Phaser 780 Color Printer Repair - $179
MODEL: Xerox Phaser 790 Color Printer Repair - $179

To further guaranty the quality of our services we accept COD payment (Cash On Delivery of service).Our technician will arrive at your location and repair your printer, get you printing again, then collect the payment.

We have technicians in:
Alabama, Arizona, Arkansas, California, Colorado, Connecticut, Delaware, Florida, Georgia, Idaho, Illinois, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maine, Maryland, Massachusetts, Michigan, Minnesota, Mississippi, Missouri, Montana, Nebraska, Nevada, New Hampshire, New Jersey, New Mexico, New York, North Carolina, North Dakota, Ohio, Oklahoma, Oregon, Pennsylvania, Rhode Island, South, Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, Washington, West Virginia, Wisconsin, and Wyoming.

Itezen, Inc.
Tel. 516.776.7346
http://www.itezen.com/
Email: sales@itezen.com

Posted on Mar 12, 2008

  • 2072 Answers

SOURCE: We have a new Xerox

What is the model number? I can answer with that info..Lots of models and lots of doors.

Posted on Sep 20, 2008

  • 2692 Answers

SOURCE: Paper Jam detected. None found.

Here is the Xerox support page for your printer. It even has a movie on removing paper jams.
http://www.office.xerox.com/perl-bin/product.pl?page=sprt&product=8400&country=United%20States&language=en#_manuals_and_documentation_

Posted on Jan 04, 2009

  • 2072 Answers

SOURCE: paper jam related to Maintenance Kit

I wonder if you got some of the silicon lubricant from the maintenance kit on the rollers.
Try taking some alcohol or a cleaner such as fantastic, 409 etc and throughly clean all the rollers in the paper tray and along that transport behind the door.
If it isn't getting out of the tray you may coincidently have a smoothe feed roller, if it is feedinf a couple of inches out of the tray and stopping in the lower rollers I suspect a slipping registration clutch. Removing the maintenance kit seems like an odd thing to start a jamming problem. As I said clean the rollers, I guess see if you happened to have gotten a chunk of ink in the paper path from the catch tray.
Is there any damage to the paper? And tears or dents in the page?
Let me know we can resolve the problem.

Posted on Jan 07, 2009

  • 1 Answer

SOURCE: phaser 860 screen says "paper jam - open front cover to clear"

I posted a problem with the phaser 860 paper jam. I found 2 broken sensor flags and am ordering the parts.

Posted on Mar 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix a printing problem where the error message load tray 1 keeps appearing?


You Really need to have this Machine Cleaned. there is too Much Paper dust On the sensor

Jun 06, 2015 | Xerox 6505/dn Workcenter 6505dn Color...

Tip

Main Error MINOLTA DI 1611, DI 2011 Messages and Their Remedies


PAPER JAM A paper misfeed occurred in the
main unit.
Open the cover at the indicated
location, and then remove the
misfed paper. (“When the Message
(Flashing alternately)
OPEN XXX SIDE COVER
All misfed paper was not removed
from the main unit.
Check the message in the display
for the location of the paper misfeed,
and then remove the misfed paper.
ORIGINAL DOC.JAM A paper misfeed occurred in the
Document Feeder.
All misfed paper was not removed
from the Automatic Document
Feeder.
Open the Document Feeder Cover
and the Document Feeder, and then
remove the misfed paper.
(Flashing alternately)
OPEN DOC.FEED COVER
∗REMOVE PAPER IN
BYPASS TRAY∗
Paper is loaded in the Manual
Bypass.
Remove the paper from the Manual
Bypass.
FRONT COVER OPEN The Front Cover of the main unit is
open or not securely closed.
Securely close the Front Cover.
(Flashing alternately)
CLOSE FRONT COVER
DUPLEX COVER OPEN The Duplex Unit Cover is open or
not securely closed.
Securely close the Duplex Unit
Cover.
(Flashing alternately)
CLOSE DUPLEX COVER
DOCUMENT COVER
OPEN
The Document Feeder is lifted up
(while a document is loaded into
it).
Securely close the Document
Feeder.
(Flashing alternately)
CLOSE DOCUMENT
COVER
DOC.FEED COVER OPEN The Document Feeder Cover is
open.
Securely close the Document
Feeder Cover.
(Flashing alternately)
CLOSE DOC.FEED
COVER
TONER EMPTY The toner is empty. Copying and
printing cannot be performed.
Replace the toner bottle with a new
one.
SUPPLY TONER
PAPER EMPTY The selected paper tray has run
out of paper.
indicates the paper tray, and
“XXX” indicates the paper size.
Load paper of the specified size into
the specified paper tray.

on Dec 18, 2009 | Office Equipment & Supplies

1 Answer

My Dell MFP 1815dn has a paper Jam 2. I removed the toner cartridge and pulled the paper out, before I realized that I needed to open the back. I believe I thought I got the paper out, but the printer is...


After a paper jam occurs in the rear cover of a Dell Laser Multi-Function Printer 1815N, the printer will not resume when the jammed paper is removed. This is the normal behavior of the printer as there is no sensor on the rear cover of this printer.

To open the back cover and remove any stuck paper, perform the following steps:
  1. Open and close the front cover.
    The jammed paper may automatically exit the printer. If the paper does not exit, go to the next step.
  2. Gently pull the paper out of the output tray.
  3. If you cannot see the paper in the output tray or the paper does not move when pulled, open the rear cover.
  4. Skip to step 9. If you do not see the paper, go to the next step.If you see the jammed paper, push the two blue pressure levers up and remove the paper.
  5. Release the blue strap, the rear cover stopper, and fully open the rear cover.
  6. Unfold the duplex guide fully.
  7. While pushing the fuser lever to the right, open the fuser door. NOTICE: Make sure to unfold the duplex guide before opening the fuser door, or the fuser door may be damaged.
  8. Pull the jammed paper out.
  9. Return the levers, fuser door, rear cover stopper, and duplex guide to their original position.
  10. Close the rear cover.
  11. Open and close the front cover.
    Printing automatically resumes.

Jun 24, 2011 | Dell 1815dn All-In-One Laser Printer

1 Answer

I have a paper jam with a samsung CLX 3175FN. Can't get the stuck paper out! Turning on and off didn't work.


If the paper is jammed inside the machine follow these steps:
1. Open the front cover and pull the toner cartridge out, lightly pushing it down.
2. Remove the jammed paper by gently pulling it straight out.
3. After removing the jammed paper, make sure there is no additional paper in the paper path.
4. Insert the toner cartridge and close the front cover.

If the paper is jammed in exit are follow these steps:
1. Open and close the front cover. The jammed paper is automatically ejected from the machine.
2. Gently pull the paper out of the output tray.
- If you do not see the jammed paper or if there is any resistance when you pull, stop and go to the next step.
3. Open the rear cover.
4. Carefully remove the paper by pulling in the direction.
- If the paper tears, make sure that all of the paper fragments are removed from the printer.
5. Close the rear cover. Printing automatically resumes.

Nov 17, 2010 | Samsung Office Equipment & Supplies

1 Answer

I have a paper jam and it says to open the front cover, put the front cover just shows the ink cartridges and there is no visible paper jam. how do i find the jam and remove it? It's a canon image...


Hi,
The paper jam could be in three places.
First:

Open the cover of fixing section, its above bypass, and check for jamed paper

Second:

Open the transfer cover, these cover has handle and it goes by pulling toward you, and check for jamed paper.

Third:

In hight of first paper cassette, on left sideway of copier, beaneath the bypass are small door, open it and check for paper jams. Be sure that you closed them properly because if they arent closed the check printer cover message will arrise.

Hope that helped

Jul 07, 2010 | Canon ImageRunner 1600 Copier

2 Answers

Paper jam and still won't print


Hi

Thanks for using FixYa. Before you can clear the error message, you must locate where in the unit the paper is jammed.

Unplug the machine for safety. Now follow these instructions based on where the paper jam is located.

1. Pull the paper tray out of the machine.
2. Pull out the jammed paper.
3. Reset the machine by opening the Upper Jam Clear Cover and then closing it.

If you cannot remove the jammed paper from the front of the machine, or the error message still appears on the LCD after you have removed the jammed paper, please go to the next step.

4. Remove the Lower Jam Clear Cover from the back of the machine. Pull the jammed paper out of the machine.

5. Put the Lower Jam Clear Cover back on. Make sure the cover is set properly.

6. Open the Upper Jam Clear Cover. Make sure that there is no jammed paper left in the corners of the machine.
Note: If the paper is jammed under the print head, unplug the machine from the power source, then move the print head to take out the paper. 7. Close the Upper Jam Clear Cover.

8. Close the output paper tray cover and slide it forward, then push the paper tray firmly back into the machine. While holding the paper tray in place, pull out the paper support until it clicks and unfold the paper support flap.

Please do rate the solution and revert for further assistance.

Thanks
Rylee

Aug 15, 2009 | Brother Office Equipment & Supplies

1 Answer

Got a paer jam and don't know how to open cover,


Turn of the printer, and do not close any of the tray or doors before all of the jams are cleared.
1). remove the paper from paper tray, removed the tray and remove the jams.
2).open the front cover and removed the toner cartidge assembly, remove any jams in this area, and behid the toner cartridge asembly.
3).left the flap at the front of the printer adn remove any jams heneath the lap.
4).Open the rear exit and remove any james.
close all covers and reinsert the paper tray and turn on the printer.

May 13, 2009 | Dell 1700 Laser Printer

2 Answers

Message on brother MFC7420 "back door open" when it's not


Actually, you need to double check the back cover and front cover, open them all to check all paper jam.
Besure to check the back cover, normally all paper jam is from the back.
be sure to close the front cover at the last cover to close.

Apr 01, 2009 | Brother MFC 7420 All-In-One Laser Printer

1 Answer

Paper Jam Error on Dell 3100cn Laser Printer


Push the side button and open the front cover

Pull out the jammed paper from the duplexer. If jammed paper cannot be found, go to the next step.

Pull up on the belt release levers and rotate the belt unit up

Remove the jammed paper and close the belt unit

Close the front cover

Jan 03, 2009 | Dell 3100cn Laser Printer

Not finding what you are looking for?
Xerox WorkCentre 6505N - multifunction  fax / copier / printer / scanner   color Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Office Equipment & Supplies Experts

Whit
Whit

Level 1 Expert

185 Answers

Xeroxrep

Level 1 Expert

33 Answers

Philip Hughes

Level 2 Expert

68 Answers

Are you a Xerox Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...