Question about Televison & Video

2 Answers

Why cant i enter code for tv ? - Televison & Video

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Televison & ... Master
  • 74,251 Answers

Programming procedure is too much to type in here by this window, and is not practical. If you wish to get details; check the site linked here. It have set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" or "Magazine" view. It will make surf easier.
http://electrohelponline.blogspot.com/
If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its user manual. Never accept a remote control, that hasn't both of this. If you see the site by "MOSAIC" or "Magazine" view, will make surf easier.

Posted on May 06, 2014

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Some less expensive brands and or models dont coenside with all devices i.Example Ihave a proscan tv and the cable remote dont have a code for it .Most major models samsung ,sony exc dont hsve this problem

Posted on May 06, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where do you enter code for tv?


You have the wrong address. Please try http://www.youtube.com/activate

Here's what the page looks like:

3_25_2013_3_43_24_pm.png

You can't miss where to enter the code!

Good day!

3_25_2013_3_46_20_pm.png

Mar 25, 2013 | YouTube Videos

1 Answer

I HAVE A SAMSUNG REMOTE AH59-02291A AND I CANT FIND THE CORRECT CODE FOR MY REGZA/TOSHIBA TV


Try holding the TV key while pointing it at your TV set, then enter code 23 and let go of the TV key. If it does not work try code 24. Both are for Toshiba.

Aug 04, 2011 | Samsung RS105N Remote Control

1 Answer

Accidently entered into store mode, but cant enter "plug and play"


hi, let try this.
Open menu , choose setup - push enter.
Choose plug and play, enter language , pass code, than follow instruction until setup home use and demo store appear.
Choose home use.
Its work with my TV.

Mar 18, 2011 | Samsung LN32A330 32 in. LCD TV

1 Answer

I cant get sky to work on my LG plasma tv


Hello
Codes to check for LG with Sky are;
065 244 405 318 037 398 191 459 245 389 080 275

1. Turn on the TV receiver

2. Press TV on the Sky Remote Control

3. Hold down SELECT and the RED buttons together for approximately two seconds, until the RED LED on the Sky remote blinks twice.

4. Enter three digit code from list for the receiver (early versions now flash twice).

5. Press select to enter code structure (the LED will flash twice if a valid code has been entered).

6. Now press the STDBY button and test other functions.

Repeat if necessary until a code is found that works most common functions


Mar 12, 2011 | LG 32LH30 32 in. LCD HDTV

2 Answers

My tv is JVC i forgot the code now i cant watch tv please help


From what i know there is no code for TV. If you mean V-Chip code, just replace the asterik signs with zeroes. Or enter 0000 or try 1111. Good luck :)

Apr 14, 2010 | Universal Remote Control Remote Control

1 Answer

Cant remember how to tune it in


  1. Turn on your TV.
  2. On your Tune In remote, press TV and release.
  3. Press and hold Set until the green light on Tune In blinks once, pauses and then blinks twice. Now release the Set key.
  4. Enter the first three-digit TV code for your Sanyo from the list which follows:
    154, 159
    These codes are listed in order of popularity, and the green light will blink twice if you perform this procedure correctly.
  5. Aim Tune In at your TV and press Power. Your TV should turn off. If it does not, repeat steps 2-5, trying each code listed in step 4 until you find the one that operates your TV.
Now Test Your TVWhy test? Many times more than one code appears to work. Testing is desirable to be sure you have the correct code for your TV or the other devices you are setting up.
  1. Press the Power key to turn on the TV, then press mute, channel scan ("CH") and volume ("VOL") keys. Tune channels 7 and 11 by entering the number followed by the Enter key.
  2. If your TV does not pass the test, return to Step 2 at the top of this page. Enter the next three-digit code and repeat the process.

Jul 30, 2009 | Televison & Video

1 Answer

How do you change the chanel to AV without remote, dont give the option on the tv buttons


check the website for the remote you have bought and enter the codes for newer models of your make of tv keep trying 1 of them should work but might not give you all functions like teletext

Jun 03, 2009 | Televison & Video

1 Answer

I HAVE A MITSUBISHI (MEDALLION MODEL TV).THE V-CHIP IS ON AND I CANT RELEASE THE V-CHIP BECAUSE A CODE IS NEEDED. IS THERE AN OVERRIDE CODE THAT CAN BE USED TO CLEAR THE VCHIP?


Mitsubishi sets use a four-digit code for a V-Chip locked program, view a locked TV, cancel the lock, or to enter the V-Chip lock menus. You can view the locked shows on the TV set by pressing the number 9 and QV buttons on the remote at the same time, whenever your code is requested. This process temporarily unlocks the TV and asks you to enter a new code.

Oct 02, 2008 | Mitsubishi Televison & Video

2 Answers

How to enter code to control TV


i cant find my quazar set up code 4 head vhq40hm?to put in to my one for all universal remote

Nov 18, 2007 | Quasar VHQ840 VHS VCR

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74251 Answers

Cindy Wells

Level 3 Expert

5128 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...