Deleting frequcies How do you delete stored frequencies

if u care, write down your favourite radio frequencies on paper before u do this .... on bottom left there is a button, push it to remove front panel ... bend a paper clip and insert it in the hole which states reset until u hear/feel tiny click ... align right side of front panel and push left side until u hear click ... now you've cleared bluetooth pair list as well as stored radio frequencies, if u jotted down radio frequencies before this reset now u can store them again ... if it helped you, pray to God to bless me ... your welcomne :)

[email protected]

You can temporarily lock out a frequency by pressing the L/O key while the frequency is displayed, or can delete it by programming 0.0 (zero point zero) into the channel. Also, programming a new frequency into the channel will automatically delete/override the old frequency.

Need the manual for your scanner? You can download and print it, at no cost, here:
http://www.uniden.com/pdf/BC80XLTom.pdf

For a comprehensive database of active frequencies in your area, and a lot of other useful scanning information, visit:
www.RadioReference.com

Bill B.
Listening in since the 60's

To RESET the scanner and delete ALL programmed frequencies:
- Power the scanner OFF
- Press and hold the 2, 9, and PSE keys and power the scanner ON.

To delete a single frequency, program 0.0 into the channel - or program a new frequency into the channel (this will automatically override the old frequency).

Bill B.
Listening in since the 60's

You can initialize the scanner to delete all information that you've programmed into it and return it to its original factory settings. To do this:

1. Turn the scanner OFF, then turn it ON again.
2. Press and hold down the CLEAR key and insert a pointed object, such as a paperclip or the point of a pen, into the RESET opening in the back of the scanner, and press the button inside the opening.
3. Release RESET. When information reappears on the scanner's display, release the CLEAR key.

NOTE: You must release the RESET button before releasing the CLEAR key.

Also note that this procedure may not be necessary. Programming a new frequency into a channel automatically deletes the frequency previously stored in that channel.

Bill B
Listening in since the 60's

Press scan,hold down,delet all,....done.enjoy.hope this helps ......

From the manual:

deleting frequencies from channels
1. Press MAN.
2. Use the number keys to enter the channel
with the frequency you want to delete.
3. Press MAN again.
4. Press PROG to enter the program mode. MAN
changes to PGM.
5. Press FUNC.
6. Press CLEAR. The frequency number changes
and 0.0000 appears.

Thank you FixYa team support, I already find the solution.

B'rgads
Andy

There is no global clear/erase function on the BC350C, but programming a new frequency on a channel automatically deletes/erases the old frequency. To delete an inactive or troublesome frequency, program "000.0" in that channel. Doing so will deleted the previously programmed frequency and set the LOCKOUT to ON for that channel. For more information on deleting frequencies, see page 27 of your operating manual.

Need the manual? You can download it here:

http://www.uniden.com/pdf/BC350Com.pdf

There is no global clear/erase function on the BC350C, but programming a new frequency on a channel automatically deletes/erases the old frequency. To delete an inactive or troublesome frequency, program "000.0" in that channel. Doing so will deleted the previously programmed frequency and set the LOCKOUT to ON for that channel. For more information on deleting frequencies, see page 27 of your operating manual.

Need the manual? You can download it here:

http://www.uniden.com/pdf/BC350Com.pdf

here is a quote from the manual; hope it helps you.


1. Press MAN, enter the bank (0-9) and channel number (00-
99) where you want to store a frequency, then press MAN
again. M and the bank and channel number appear at the
upper left corner of the display (for example: M000).
Press FUNC. Then press e or d. The bank number moves in
the direction of the arrow pressed.
Press FUNC. Then hold down e or d. The bank number
moves continuously in the assigned direction.
Press e. The channel number moves upward one by one.
Or, press d. The channel number moves downward one
by one.
2. Press PGM. M changes to P.
3. Use the number keys and ./DELAY to enter the frequency
(including the decimal point) you want to store.
If you make a mistake, press CL to delete a single digit or press
and hold CL about 2 seconds to delete all digits.
4. Press ENT to store the frequency into the channel.
If you made a mistake in Step 3, Invalid Freq. briefl y
appears and the scanner beeps when you press ENT. Start
again from Step 3.
Your scanner automatically rounds the entered frequency
to the nearest valid frequency. For example, if you enter a
frequency of 151.553, your scanner accepts it as 151.550.