Question about Washing Machines
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
That fault is the pump blocked error (no change in water level).
i have a quick and easy way to solve this problem.
first turn the machine off then tilt the machine back and lean it on something(a chair or wall), look underneath, in the top right hand corner of the plastic outer boul you will see a small pump motor it has a fan on it spin this fan and if it is hard to turn that means there is somthing stuck in the drain pump keep turning the fan and try to free whatever is stuck in the pump, then try the machine on spin again all goin well the object in the pump should come out with the drain water(doing this will not harm the machine) if the object is still stuck you will need to get the water out of the machine (bailing or siphioning will work) and tilt the machine back again and take the wires off the pump and there should be a white tab on the boul holding the pump on pull this tab and twist the pump anticlockwise about a quarter turn(you will need a few towels or a boul or bucket to catch the water) and it should come off exposing the blockage.
Hope this solves your Problem.
Posted on Aug 03, 2009
Unplug the machine have someone tilt the machine back and look under the machine for a little fan on a motor give it a turn to see if it spins it might just be sticky or it may need replacing.
Posted on Feb 20, 2010
136 fault is 'motor stall'...Quite often this is a broken wire to the motor. However it could also be a Motor fault, or Rotary Position Sensor problem. Water damage can cause this fault as well. After a visual check for broken wires or water damage, and if your machine is in good condition, you should consider a tech....Good luck...Nomess
Posted on May 24, 2010
Tips for a great answer:
Dec 12, 2015 | Fisher and Paykel GWL11 Top Load Washer
Feb 10, 2014 | Fisher and Paykel Washing Machines
Jul 28, 2012 | Fisher and Paykel Washing Machines
Jul 03, 2012 | Fisher and Paykel Washing Machines
Mar 22, 2012 | Fisher and Paykel Fisher & Paykel Washer
May 17, 2011 | Fisher and Paykel Fisher & Paykel Washer
Nov 15, 2010 | Fisher and Paykel (IWL12)
Sep 06, 2010 | Fisher and Paykel GWL11 Top Load Washer
May 22, 2009 | Fisher Washing Machines
Apr 20, 2009 | Fisher and Paykel GWL11 Top Load Washer
Aug 16, 2017 | Washing Machines
25 people viewed this question
Usually answered in minutes!