Question about Sony PS-LX250H Turntable

1 Answer

How do i put the belt back on my sony turntable?

While moving my belt came off

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Sony Master
  • 5,011 Answers

There's a video guide here:

Posted on Aug 03, 2015

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

djproaudio
  • 515 Answers

SOURCE: drive belt on Sony turntable

Usually, for most turntables, the belt goes on the bottom of the platter first. Then you put the platter back on the turntable. From here you should see an opening on the platter where you can 'grab' the belt. Pinch the belt, and then wrap it around the rotating motor's shaft. This is usually at the top left side - around the 10 o'clock position.

- OPTiC
Turntable Technician
www.1200s.com

Posted on Sep 08, 2008

dunnbiker
  • 8546 Answers

SOURCE: I just moved, and the

Manuals and instructions for belt here:

http://esupport.sony.com/US/perl/model-home.pl?mdl=PSLX300USB&LOC=3

Posted on Jan 15, 2011

  • 5 Answers

SOURCE: i have a sony lx250h turntable and the belt came

REMOVE SLIP MAT AND THEN TRY TO FIX ON THE MOTOR

Posted on Aug 31, 2011

  • 61 Answers

SOURCE: need to put belt back

You can watch the video on the link below. This shows a generic way to replace the belt

http://www.youtube.com/watch?v=3c1NcRvM9wc

Posted on Sep 28, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Sony PS-LX250H that was put into storage and moved twice while I was in transit between residences. Since I got to my new place I haven't been able to get it to work at all even after rep


hi
check the belt it might be loose...
elasticity of the belt is ... no more :(
try turning the plate by your hand and see what happens
Good Luck

May 09, 2017 | Sony PS-LX250H Turntable

1 Answer

I have the sony record player above, and when I was moving I put it on its side and the belt came off. Now I cant figure out how to put it back on. Help ?


The Operating Instructions link on this page:

http://esupport.sony.com/US/perl/model-documents.pl?region_id=1&mdl=PS-LX250H

appears to give guidance on connecting the belt. Any use?

Oct 13, 2010 | Sony PS-LX250H Turntable

1 Answer

How do I put my belt back on the turntable?


Lift felt on platter and and lift the platter section off the unit by putting your thumb and forefinger through the two large holes and pull upwards.There should not be any special routing for the belt and should go directly onto the spindle motor to your platter. Place the belt around the inside rim of the platter while it is still off the unit. Now replace the platter and move the platter around until you see the spindle motor through one of the holes. Use some tweezers to manouvre the belt onto the spindle motor. On some units you will have to lay the belt out inside the unit, replace the platter and manouvre the belt onto the platter. Hope this helps

Oct 20, 2009 | Sony PS-LX250H Turntable

1 Answer

How do I install the belt on the turntable


1) Remove the platter - just lift up
2) Underneath the platter, you'll see a small lip section
3) Wrap the belt around this lip
4) Put platter back on turntable
5) Rotate platter until you see the motor shaft through the holes on the platter - a brass round looking piece
6) Pinch the belt around the motor shaft.
7) That's it.

- OPTiC
MasterTech
Digital Analog Therapy
Turntable Parts : Turntable Repairs

Aug 15, 2009 | Sony PS-LX250 Turntable

1 Answer

The belt fell of the gears on my turntable.


Hi dont know the model but normally like so:
Take the platter of the turntable, it should just lift of, but there could be a circlip in the middle that needs to come off first. Just lift the mat first.

Place the belt back onto the platter first, should see where it goes, then put the platter back on. There are holes in the paltter which you can then grab the belt and pull it over the motor spindle.

Hope that helps

Jul 27, 2009 | Sony PS-LX250H Turntable

2 Answers

Drive belt on Sony turntable


Usually, for most turntables, the belt goes on the bottom of the platter first. Then you put the platter back on the turntable. From here you should see an opening on the platter where you can 'grab' the belt. Pinch the belt, and then wrap it around the rotating motor's shaft. This is usually at the top left side - around the 10 o'clock position.

- OPTiC
Turntable Technician
www.1200s.com

Sep 07, 2008 | Sony PS-LX250H Turntable

1 Answer

Won't start


I had the same problem with the arm constantly starting and stopping, and the suggestion above works. Despite, I was a little confused on how to do it. Here's what I did in detail:

- Remove the turntable mat.
- Unhook the belt and remove the turntable platter.
- Once the platter's removed, you should see two plastic white gears in the middle. Rotate the center gear clockwise until its tab hits the larger gear. The center gear should move freely and without resistance until you hit that gear.
- Put the platter back, making sure to re-hook the belt around the spindle.
- Put the mat back.

After that, you should be set!

Jun 04, 2008 | Sony PS-LX250 Turntable

1 Answer

Does not turn on


Have you checked to see if the motor at least turns. The motor is where the belt wraps around and causes it to turn. If you have absolutely no power, then your transformer might have shorted, and will need to be replaced. Most transformers are generic, so as long as it is the correct size, and rating, you'll be fine.

- TWEAK A/V LAB

Nov 12, 2007 | Sony PS-LX250H Turntable

Not finding what you are looking for?
Sony PS-LX250H Turntable Logo

Related Topics:

205 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Audio Players & Recorders Experts

kakima

Level 3 Expert

102366 Answers

 Grubhead
Grubhead

Level 3 Expert

5011 Answers

The Knight
The Knight

Level 3 Expert

73619 Answers

Are you a Sony Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...