Question about Husqvarna Garden

1 Answer

How to install the throttle linkage on a husqvarna 55 rancher chain saw

Installation diagram needed for carburetor linkage installation

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Husqvarna Master
  • 1,807 Answers

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 211 Answers

SOURCE: chain saw

Hi

Look at the bottom of the chainsaw.There is a screw(it has connection with the oiler piston).

best regards savumihai71

Posted on Dec 07, 2008

dontbother10
  • 2220 Answers

SOURCE: I am installing a throttle pusher and choke arm in

Try downloadinf the IPL here:
http://www.husqvarna.com/us/homeowner/support/download-manuals/
I should help.
Lou

Posted on Sep 04, 2009

dontbother10
  • 2220 Answers

SOURCE: husqvarna chain saw rancher 55

Try this get back to us with the results.
Ignition Coil Test
http://www.youtube.com/watch?v=L7WNBDRG4C4&feature=PlayList&p=3789DC1EE87C8098&playnext=1&playnext_from=PL&index=21
You may need to use a jumper wire between the threaded part of the plug and the cooling fins. You don’t have to bend up the electrode. HTH
Lou

Posted on Oct 02, 2009

  • 4 Answers

SOURCE: what is the fuel mix

33:1.............always mix it on the heavy side and you will never burn your saw up.........go to walfart and get a bottle of "gumout" octane booster and stick it in the gas and it will run better than ever.......

Posted on Dec 17, 2010

  • 95 Answers

SOURCE: I have a Rancher 55 18" with a new chain. Started

First thing you need to check is the cylinder.Take the spark plug ouy.use a flashlight and look down the hole towards the muffler side.If its scratched up afraid the motor is shot and will need to be rebuilt.If its not scratched up let me know on here.Then I will give you more things to check.

Posted on Mar 17, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

REPLACE CHAIN BAR STUDS 55 RANCHER


Tom, Check the attached links,instruction and guides on Husqvarna chainsaw, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Husqvarna rancher 55 chain bolt replacement

http://www.husqvarna.com/ddoc/HUSO/HUSO2002_USen/HUSO2002_USen__1140106-95.pdf

How to Change Chain on Husqvarna Chainsaw Model 445

How to Adjust the Oiler on Husqvarna 55 Rancher

Apr 02, 2016 | Husqvarna 36 41 50 51 55 136 141 154 254...

1 Answer

How to remove carb on 350 husqvarna chain saw


Remove the air box cover and remove the air filter. You will see 2 screws going into the carburetor. These 2 screws hold the carburetor onto the saw. You must use care (and take a couple pictures) to see how the linkage fits back onto the carburetor. You will also see the choke and kill button on the left hand side. Take you time and you should be fine. The throttle linkage is the hard part.

Jul 08, 2014 | Husqvarna Garden

1 Answer

How to remove top end husqvarn 460 chain saw


To remove the top end, the carburetor must be removed as well as much of the plastic casing. The cylinder head bolts install from below. There are 4 bolts holding the cylinder assembly.

Apr 16, 2014 | Husqvarna 20" 60cc Rancher Chain Saw 460

1 Answer

Need thread size for Husqvarna decompresion valve


dont know off the top of my head however you can get a thread identifier tool for 5 bucks, or if you have a tap and die set you can see which one fits then read the number off the side

Dec 17, 2013 | Husqvarna Chain Saw Models 51, 55

1 Answer

I need a drawing of a carburettor on a 61 Huaqarrna chain saw\r\nwhere do I get it? It is a husqvarna Chain saw


You didn't specify of its a 61 or a 61 Rancher. Here's the info you need to take to your Husky dealer. The diagram will be with the major repair kit.
Model 61, then the 61 Rancher:
CARBURETOR Model 61: ecblank.gif Tillotson HS-163A, B , HS-254A series or
Walbro WS series
MAJOR REPAIR KIT: ecblank.gif RK-23HS for HS-163A MINOR REPAIR KIT: ecblank.gif DG-5HS/T for HS-163A

CARBURETOR Model 61 Rancher: ecblank.gif Tillotson HS-163A series or
Walbro WS-17A, B series
MAJOR REPAIR KIT: ecblank.gif RK-23HS
K10-WS
MINOR REPAIR KIT: ecblank.gif DG-5HS/T
D10-WS



May 18, 2010 | Husqvarna Garden

1 Answer

Rancher 55, big storm recently, using a lot. Quit


Check the condition of the fuel line from inside the tank to the carburetor. Check tightness of all screws on the carburetor body. If no help, disassemble the carburetor and check the condition of the pumper valves and diaphragms. If looks dirty, clean with spray carburetor cleaner and blow out with compressed air (don't use cleaner on any rubber or plastic parts). Remove the H and L needles for cleaning and air blast. Preset the needles 1-1/2 turns CCW from CW stops (lightly). If the rubber parts are stiff, re-kit the carburetor. After engine warm--up, set full throttle and adjust H for highest speed, but 4-stroking. It should run smoothly with a light load (cutting). Set L for smooth idle but rich enough to allow the engine to follow the throttle. Set idle speed just below chain movement. Hope this gets you going again.

Aug 25, 2009 | Husqvarna Chain Saw 20" Bar

1 Answer

What size file to sharpen chain for 55 rancher


It depends on the chain you have installed on the chainsaw. You can look at the numbers stamped on the drive link side of the cutting chain and it should have a 2 digit number that correlates to the size.

The factory chain supplied with the #455 rancher was a .325" pitch 3/8" chain.

Here's a link to the specs for your saw with some useful info

http://www.husqvarna.com/us/homeowner/products/sawing/chainsaws/455-rancher/#specifications

Hope you found this very helpful and best regards!

Aug 06, 2009 | Husqvarna , No.455 Rancher, 20" Gas -...

Not finding what you are looking for?
Garden Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Garden Experts

Phil Walker
Phil Walker

Level 3 Expert

605 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Roland W VanLue
Roland W VanLue

Level 3 Expert

486 Answers

Are you a Husqvarna Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...