Question about Toshiba Satellite 2410-S205 Notebook
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: BIOS Resetting...
Please open this link this will help you
And dont forget to rate FIXYA if it didnt help please reply but dont rate any rating
Posted on May 03, 2008
If you know the current password, use it to enter BIOS SETUP.
Then, type a "blank" ("space-bar") as the "new" password.
If you don't know the current password, you're stuck;
this is a "security" feature to prevent a stolen laptop from being used by the thief.
Posted on May 27, 2009
there is no actual password. you need to remove the ram and short out two pins underneath the black plastic they look ike two E's connected like E3. use a flat blade screwe driver. do this while powered off!
Posted on Nov 04, 2009
Usually, there is the CMOS battery located in your laptop's main board. You just have to take that battery off for like 3 minutes and then return it back. You will have to open your laptop's screws underneath. If this laptop is still under warranty, do not open it as it will revoke the warranty seal. Just take if to an authorized service center and let them do it for you for free.
Posted on Nov 05, 2009
There are 2 ways you can reset your bios.
1. On the motherboard there is a small watch battery. Remove this battery along with the power cable from the power supply. Hold down the power button to fully discharge the system. Wait 2-3 minutes then reinstall the battery and plug in your system. Your reset is now complete
2. Some motherboards have a 3 pin jumper by the battery. Lets say that the jumper is on pins 2 and 3. Remove the jumper while the machine is OFF and place onto pins 1 and 2. Power on your machine for a minute. (Note: Your system will not POST). Shutdown your machine and put the jumper back to pins 2 and 3. Your reset is now complete
This is a great troubleshooting step for those of you having POST issues or no POSTing at all. Like other troubleshooting steps, this will not always work but usually will depending on the problem.
Please let me know if you have any further questions or concerns.
Posted on May 05, 2010
Tips for a great answer:
Mar 05, 2011 | Toshiba Satellite 2410-S205 Notebook
Feb 20, 2011 | Toshiba Satellite 2410-S205 Notebook
May 05, 2010 | Toshiba Satellite 2410-S205 Notebook
Dec 11, 2009 | Toshiba Satellite 2415-S205 Notebook
Jul 31, 2009 | Toshiba Satellite 2410-S205 Notebook
Mar 15, 2009 | Toshiba Satellite 2410-S205 Notebook
Feb 19, 2009 | Toshiba Satellite 2410-S206...
88 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: