How to use drier of whirlpool AWG336 - Whirlpool AWG329 Front Load Washer/Dryer

Would you please write back with details about what is wrong with the drier? Is the problem that the drier will not turn on and spin the drum or is the problem, no heat? Would you also include make, model and what is it that you are hoping to gather from us?

You should find your answer here:

WHIRLPOOL LAUNDRY CENTER Parts Model LTE5243DQ3 SearsPartsDirect

Try to look if the cable is unplug or something is placed wrong or if it might be a mouse that is biting the wire .thanks for my opinion.

Go online to Contact Whirlpool Customer Service.

try replacing hearter wire under drier

check the belt from the bottom at the front

the spark ignitor will need to be replaced

Good day,
Flows from the tail end of the condenser into the dryer, out of the dryer into the capillary tube.

To turn off the control lock,press and hold the end of cycle
button for a few seconds.

Thermostat controls heat. There is also a

motor centrifulgal switch, in the element

circuit, that the motor closes to insure

the motor is turning. Try another heat

setting. There is more than one

thermostat. You may have blown the

'thermal fuse' too, which requires

replacement. The elecment has a contact in

the 'timer'circuit too.

It is possible that your element has

failed also.

Tripped high limit. Must clean the lint

filter and the exhaust vent tube and all

the way in to the dryer. Hot air exit is

restricted.


If you need further help, I’m available over the phone at https://www.6ya.com/expert/craig_3fa289bf857b1a3c