Question about D-Link RangeBooster G WBR-2310 Wireless Router (WBR2310)

2 Answers

I can't access manually my wbr-2310 (modem router dsl-500b)

The problem is that i can't to access the wireless manually with ip 192.168.0.1. My network have the ip range 10.1.1.1 and my wireless is not accessible. When i try run the installation cd, this return error 112. This is not first time installation. In my first installation the wbr-2310 was configurate and worked well. Today my wbr-2310 is working but i don't have safe wireless network. I want to put security to my wireless network.

Posted by on

  • raoliv Jul 07, 2009

    I resolved my problem. I connected my wbr-2310 directly in my computer and accessed with ip 192.168.0.1.

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 212 Answers

You need to configure the wireless on the router through a cable connection at first. after logging in on the router (default admin login and password should be mentioned in the router's manual) you can enable the wireless and the DHCP. to access the router, open an internet browser window and surf to the address http://192.168.0.1, where you will be asked to fill in the admin password.
please keep us posted on any evolution

Posted on Jun 22, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had to go to http://192.168.10.1 to access the router.
That worked for me.

Posted on Jul 07, 2009

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

kakee
  • 1268 Answers

SOURCE: wbr-2310 error 112

Check your physical connection first. From the modem, it should be connected to the router's Internet port, then your computer must be connected to port 1 on the back of the router. Then do a power cycle, no need to run the setup CD. If it doesn't work, you need to manually configure the router. You may need assistance from D-Link tech support. Call their toll free number

Posted on Jun 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Just need help to hook up im slow learner handicap know how to just walk thru it make sure im do ing it right just got it today


Who is you ISP? if you're using cable connection follow these steps:

1. Connect modem to WAN port of the WBR-2310
2. Connect computer to port 1 of the WBR-2310
3. Open web browser (IE, firefox,chrome,safari), and type in 192.168.0.1 into your address bar
4.Into the log-in page username:admin password: (none)
5.click on "SETUP"
6. Click on "MANUAL CONFIGURE"
7..in the Internet connection type, make sure that it must be in DYNAMIC IP DHCP
8. Click on CLONE YOUR PC's MAC ADDRESS button(notice that mac address will change after you click on that button)
9. Click on SAVE settings now and it will count down click on Continue after that
10. Then Try to ACCESS Internet

/... but if still you cannot access Internet try to power cycle the modem and the router.. follow these steps also

1. turn off bothe modem and router (just unplug the power cord)
2. after 1 minute, TURN ON first the modem,
3. after 1 minute again, TURN ON the router
4. after 1 minute try to access Internet

But if still no Internet connection, please look for the brand of your modem if it is speedstream 5100 or hugesnet or actiontec modem because those modem have the same IP address with your DLINK router and you need to change the IP address of your DLink then....

Further questions? call 1-877-453-5465 (US), 1-800-361-5265

Hope this will help you. Goodday

Aug 13, 2010 | D-Link RangeBooster G WBR-2310 Wireless...

1 Answer

D-Link wireless router,WBR-2310 no connection thru router, connect ok thru dsl modem when d-link ethernet cable connected, lose all internet


First reset all settings of router to default.
You can reset it with RESET button it is in back side of router press It for 10 seconds.

Then connect your router to computer with ethernet cable.
Then access it with following link.

http://192.168.1.1
or
http://192.168.0.1
type user as "admin" and password as "admin" or blank or "password"
then configure your router WAN settings as your internet service provider settings.
Go to wireless enable wi fi .
Then save all settings then check.
Also enable DHCP if you want ip addreses automatic from router.
Then save settings and restart router.
Let me know if you need more assistanse.
Thanks.

Aug 31, 2009 | D-Link RangeBooster G WBR-2310 Wireless...

1 Answer

Wbr-2310 error 112


Check your physical connection first. From the modem, it should be connected to the router's Internet port, then your computer must be connected to port 1 on the back of the router. Then do a power cycle, no need to run the setup CD. If it doesn't work, you need to manually configure the router. You may need assistance from D-Link tech support. Call their toll free number

Jun 20, 2009 | D-Link RangeBooster G WBR-2310 Wireless...

2 Answers

How to set up vonage my wbr-2310 router and 2wire ATnT modem


2wire routers will only work with another device (router) if you will set it up to bridge mode. you need to go to the ip address of 2wire and check the box to enable routing.

Mar 25, 2009 | D-Link RangeBooster G WBR-2310 Wireless...

1 Answer

Need to set up router without the CD


Connect one of your computer to LAN port 1, connect the modem to port WAN section, access the configuration page 192.168.0.1, configure the router as dynamic IP address under settings, then check the IP address under status (WAN section) if you have the IP address it means that your connected.

Mar 15, 2009 | D-Link RangeBooster G WBR-2310 Wireless...

1 Answer

Dlink WBR 2310 cannot connec to internet


Try to bypass the router and connect to your modem. Make sure you have Internet connection.
>If you have Internet connection. connect back your modem to the router.
>access the configuration page of your router.
>If you are given a specific IP by your Internet Service Provider, use that one.
>Login to your Dlink (type in on the address bar 192.168.0.1)
>Click Setup and Internet > Click on Manual Configure
>My Internet connection would be Static IP
>Type in your IP address, Subnet Mask, Default Gateway, Primary and Alternate DNS
>Click on Save Setting on top.

but if your Internet Service Provider did not provide you those informations
> Under My Internet connection Type choose DYNAMIC IP
>Click on Clone Your PC MAC address
>Click on Save Settings
>If it ask you to reboot, click on Reboot.

>At the very top click on Status
>Under Status look for WAN
>Under WAN look for IP address
>If you have values beside from zero it means you have Internet connection otherwise, call your dlink manufacturer for manual configuring your router for Internet connection.

Jan 30, 2009 | D-Link 802.11g Wireless Router WBR-1310...

2 Answers

Unable to access DLink WBR 2310 Configuration page


At the back of the router is a tiny pinhole. Using a pen try to press it for 15 secs and try to access the page using the 192.168.0.1

Jan 02, 2009 | D-Link RangeBooster G WBR-2310 Wireless...

2 Answers

No wireless connection


did you hold down the reset button for at least 10 seconds on the back? that should reset it to factory settings

Jun 28, 2008 | D-Link RangeBooster G WBR-2310 Wireless...

1 Answer

D-LINK WBR-2310 SET-UP


Sounds like you need to 'copy' the mac address of the computer it was orginally hooked to before and put it into the router. Some routers have an option to do this in the settings menu of the router with one click.

May 15, 2008 | D-Link RangeBooster G WBR-2310 Wireless...

1 Answer

Installation


Go to your start menu and click on your run box type in cmd
that will bring you to a black command prompt.check your ip address and your gateway.your router should be 192.168.0.1>your Ip Address should also start with a 192.168 no.If you dont see them try a power cycle,turn off modem and then router wait abot 10-20 sec, plug modem back in wait untill its powered up and then router, try connection, if it failes do an ipconfig again if you still dont have a vaid ip and gateway, router could be defected.

Feb 06, 2008 | D-Link RangeBooster G WBR-2310 Wireless...

Not finding what you are looking for?
D-Link RangeBooster G  WBR-2310 Wireless Router (WBR2310) Logo

Related Topics:

699 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...