Question about Reebok treadmill i-run s

Open Question

E 5 error display

Machine stops after few minutes displays e 5 error code

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Top loading Gorenje WT 52113, it stops a few minutes into the washing cycle, an error message comes up on the small digital display, looks like d02?


This washer only has f fail code, they recommend you contact svc person for repair. Fail code for F02: F2 Door lock fault detected The door lock on the washing machine has been detected as faulty or failed to engage correctly.
  • Check that the washing machine door has been closed correctly and is engaging the door lock correctly
  • Check wiring to door lock
  • Check door lock
  • Check wiring at control module or timer

Aug 12, 2016 | Washing Machines

Tip

WHIRLPOOL Duet & Duet HT washing machine shows F/02 error code on display?


This error is shown on the display due to:--
Drain time exceeding more then 8 minutes, the water valves will stop functioning and the the water valves turns off and "F/02" will be displayed on the screen.
NOTE: in some cases it has been noticed that 4 minutes the "Suds" error displays, and then 4 minutes later the F02 error displays.
This Will Help.Good Luck.



on Mar 11, 2010 | Washing Machines

1 Answer

Error E5 on Balay ts7210 washing machine


This is a door lock problem can be door lock or main PCB

Dec 20, 2013 | Washing Machines

1 Answer

Error code f 21, what does this mean?


The error code F-21 refers to Long Drain. The washer has sensed that it has not drained out completely and cannot go into further cycle.

If yours is a HE 2 washer, afer few minutes, Sd error will be displayed and then after couple of minutes F21 error code will appear. Water valves will be turned off and stops running.

If yours is a HE front load, when drain time exceeds 8 min, F21 error will be displayed. The water valves will be shut off and pump will stop running.

Generally, by re-storing the power to washer, it may fix the problem.
You may press the pause or the cancel button twice to clear the display.
You may have to double check the drain hose to see if there are any kink, clogs.

Also, you may unplug your washer, turn the circuit breaker off for 1-2 minutes and then plug it back in to check if it works. After this, check to see if the washer drains.

May 18, 2010 | Washing Machines

3 Answers

We have a Kenmore Elite Calypso, it is not washing


"Ld" (Long Drain) flashes
Is the drain hose kinked or clogged?
Press STOP/CANCEL to clear the display.
• "CA" or "Cl" (Current Limit)
Is the washer overloaded?
Press STOP/CANCEL to clear the display.

Here is a manual:

http://www.managemyhome.com/mmh/lis_pdf/OWNM/L0102048.pdf

See page 17.

Sep 15, 2009 | Washing Machines

2 Answers

Stops mid-cycle, does not drain, displays nd error code?


Hello.
That code is telling you that the unit is draining to slow. After 15 minutes it is not below the low water level and will not spin out. The best repair for this is to replaced the pump on your unit.

Jul 15, 2009 | Maytag Neptune MAH9700 Front Load Washer

1 Answer

Error code F 21? washer stops


Hi

The error code F21 means LONG DRAIN
If the drain time exceeds 8 minutes the water valves turn off.

NOTES: After 4 minutes the “Sd” error will be displayed, and then 4 minutes later the “F/21” error code will be displayed. Press PAUSE/CANCEL two times to clear the display.


Possible Causes/Procedure

1. Check the drain hose and make sure it is not plugged or kinked.
2. Unplug washer or disconnect power.
3. Check the electrical connections at the pump and make sure the pump is running.
4. Check the drain pump filter for foreign objects.
5. Plug in washer or reconnect power.
6. If the above does not correct the problem, go to step 7.
7. Unplug washer or disconnect power.
8. Replace the pump.


Please do rate the solution as FixYa and revert for further assistance.

Thanks
Rylee

May 04, 2009 | Whirlpool Duet GHW9150P Front Load Washer

2 Answers

Code 39 err


Hi, Victor955


This is a Processor Rest Error

This error code is displayed if the control failed to save cycle information during a power failure. This does not generate an error code beep.

Press STOP/CANCEL to clear the display.
And if needed unplug for 5 minutes to reset the system



Please remember to leave a rating.

Oct 18, 2008 | Whirlpool Calypso GVW9959K Top Load Washer

1 Answer

F-5 error code on Kenmore elite HE3 45872


Click on the following link for a full explanation of the "F05" error code:

http://www.fixya.com/support/r629462-f05_error_code_whirlpool_duet_kenmore

This is not a difficult repair. The error indicates a failure of the heating circuit. If you are not sure of how to diagnose this yourself, or require additional assistance, please post back and let me know. I hope you find this information helpful.

Jun 08, 2008 | Kenmore Elite 45986 Front Load Washer

Not finding what you are looking for?
Reebok treadmill i-run s Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Reebok Exercise & Fitness Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Matt Olenzek
Matt Olenzek

Level 2 Expert

293 Answers

Ross Metcalfe
Ross Metcalfe

Level 2 Expert

128 Answers

Are you a Reebok Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...