Question about Fujitsu LifeBook S7020 Notebook

1 Answer

Take out the ram and put it back on Fujitsu S series LBS6130

Hi,

Nothing come out from the screen after that. Before take out the ram and put back the notebook working fine.

Try to clean the ram and seated back still the same problem....

Please help.

Thanks.

Garry.

Posted by on

  • garrykhoo Jun 22, 2009

    I tried on both slot but still the same.... I use another ram to test and it's work.


    The ram spoilt just like that.... I take out a lot of ram from notebook but this is my first time the ram spoilt JUST LIKE THAT!!!!!!!!!! My godness!!!!!!!!!


    Don't buy Fujitsu!!!!!!!!!!

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 34 Answers

Try reinsert the RAM in another slot. If there are two RAM chips then try reinserting one by one. Make sure that it sits on the slot properly

Posted on Jun 22, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My fujitsu lifebook s7211,s series have startup


It seems like a hardware issue with the RAM you just put in. Please take it to the nearest service center and get it fixed. You may need to remove the RAM and reinsert it into the memory slot correctly. Also please check if the RAM matches the laptops specifications, ie, the laptop supports the RAM that you are installing.

Aug 31, 2014 | Computers & Internet

1 Answer

Adding memory to Fujitsu LIfebook Series A3040


You remove the access cover which is where the power button is right under the screen by sliding it to the left until it comes off.Then you push the keyboard up to the back of the laptop until it will lift up exposing another cover. You remove the second cover and that is where the ram is located.Ram is under the keyboard.

Oct 09, 2009 | Fujitsu Siemens LIFEBOOK A3040 PC Notebook

1 Answer

Continuous beeps


Hi...

These problem is the RAM you need to remove the RAM and clean the dust, then after that reinsert the RAM in their slot, or you try to use the other slot. If the same problem happen tr to use another RAM,
If the the same thing is happen again maybe the RAM socket is faulty already, you need to replace, "good luck"

Regards
PCmania

Jul 15, 2009 | Fujitsu Computers & Internet

1 Answer

Display problem in Fujitsu LifeBook C Series(c-6631


the internal bulbs of ur monitor screen have deteriorated...the manufacturers are real smart, these monitors dont last forever. So if repair estimate is too expensive then replace the whole unit.

Always purchase laptop or notebooks NEW or never more than 5 years old.

May 24, 2009 | Fujitsu LifeBook C6631 Notebook

1 Answer

Screen replacement fujitsu l7310


what happened to the screen
you should always replace your screen with the proper model
sometimes cheaper to gat a new laptop

Jan 19, 2009 | Fujitsu Siemens AMILO Pro V2000 Notebook

1 Answer

Cpu can not boot


I don't think it is a ram issue.Try this when the computer is booting,hit the F8 key. That boots you into safe mode where only the most necessary drivers and programs load. If it loads in safe mode that is good. A little bit of daignostic work can locate the problem after that.

Dec 03, 2008 | Computers & Internet

1 Answer

Fujitsu Lifebook S Series. Screen shut down as normal while not active but failed to recover. Switching off / on screen stays black .. not a thing and no sound when switched on. bode5@optusnet.com.au


Hi there, try removing the battery from the back of it and also take out the RAM (if accessible). Leave it half an hour and then put the RAM and battey back in.

If this doesn't resolve the issue email me chris.best4@ntlworld.com

It may be a faulty switch.

Chris

Jul 22, 2008 | Fujitsu Computers & Internet

Not finding what you are looking for?
Fujitsu LifeBook S7020 Notebook Logo

Related Topics:

398 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fujitsu Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Alun Cox

Level 3 Expert

2678 Answers

Computer Links

Level 3 Expert

2386 Answers

Are you a Fujitsu Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...