Question about E-Machines eMachines Desktop PC
I have an emachine t2892. i put a geforce2 (mx 400) video card in and when i started the machine up it didn't do anything but beep at me. I took the card back out and it still just beeps at me and i don't know how to fix it. Is there something i can try to get the thing to boot back up?
It definitely sounds like a ram issue pull out all your ram and one by one put a ram stick in the first slot and turn on your pc if this fixes the problem and all your ram sticks are good then continue testing each dimm slott until the problem re-occurs and that slot is most likely toast
Posted on Aug 18, 2008
First see RAM is inserted properly or not if not
take out our RAM and and reinstalled it .
Posted on Jun 09, 2008
Review your replacement process to make sure that you didn't accidentally drop any screws, or anything else metallic, into the motherboard area. (Yes, it's a dumb thing to do, but we have all done it at least once. Did I ever tell you about the time that I managed to unknowingly drop a staple down in the motherboard? )
The next thing to do is to reseat all of the cable connectors on the motherboard and drives. Remove all of the cards, make sure that the cards slots are clean (No lint and such), make sure that the card connectors are clean and reseat the cards. Be sure to install all card holding clips and/or screws.
Posted on Nov 03, 2007
Tips for a great answer:
Mar 30, 2013 | eMachines T2892 PC Desktop
Jun 07, 2011 | eMachines ET1161-07 Desktop PC
Jan 17, 2011 | eMachines T2892 PC Desktop
Oct 07, 2010 | eMachines T2892 PC Desktop
Feb 02, 2010 | Dell OptiPlex GX240 PC Desktop
Jul 11, 2009 | PC Desktops
Dec 03, 2008 | E-Machines eMachines Desktop PC
Apr 07, 2008 | PC Desktops
42 people viewed this question
Usually answered in minutes!