Question about Avion AV-DVR100 DVD Recorder

3 Answers

How do you turn off the progressive scan

We finally figured out that the progressive scan has been activated on our DVR100. Apparently our TV doesn't support the progressive scan, so the picture is blank. Does anyone know how to turn it off or reset the machine? The User's Manual is long gone!!

Posted by on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

My remote was different from the one that Trackcar 2365 posted so I came up with this. This will take off the PRO symbol without resetting all of your other settings.

Press SYSTEM
Press DOWN arrow once
Press RIGHT arrow three times
Press SETUP once
You should see the Menu screen. At the point you should use the LEFT arrow key to get back to the main system. The system will be in INTERLACED mode from that point.

Posted on Sep 20, 2008

  • aggieowl Sep 20, 2008

    My remote was different from the one that Trackcar 2365 posted so I came up with this. This will take off the PRO symbol without resetting all of your other settings. My remote had SELECT and SYSTEM instead of Setup and Enter.

    Press SYSTEM
    Press DOWN arrow once
    Press RIGHT arrow three times
    Press SELECT once


    You should see the Menu screen. At the point you should use the LEFT arrow key to get back to the main system. The system will be in INTERLACED mode from that point.My remote was different from the one that Trackcar 2365 posted so I came up with this. This will take off the PRO symbol without resetting all of your other settings.

    Press SYSTEM
    Press DOWN arrow once
    Press RIGHT arrow three times
    Press SETUP once
    You should see the Menu screen. At the point you should use the LEFT arrow key to get back to the main system. The system will be in INTERLACED mode from that point.

×

Ad

I own this model and do have the manual; however, standard AV and S-Video connections do not transfer progressive scan video images. If you hookup a progressive scan output to a non-progressive scan TV input, you will not get an image, so it is probably the way you have your machine connected to your TV that is the problem. If you are trying to watch regular TV through your machine, you will probably need to use a standard Coaxial Cable. I hope this helps.

Posted on Nov 20, 2007

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

To do a blind RESET to factory defaults:
turn unit on
wait until finished starting up
Press SETUP
SETUP is Displayed on DVR100
Press Right Button
Press Down Button three times
Press Enter twice
Unit should revert to Factory Defaults

Posted on Dec 14, 2007

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trying to figure out why my moves shows like this, split view on TV


turn progressive scan mode off, this tv doesn't support progressive scan, hence double image. no model no. or brand ...... please rate or comment......meder's tv service arnold ca usa

Nov 18, 2012 | Televison & Video

1 Answer

Is Trutech DVD player model #008-06-0950 progressive or non-progressive ?


all the dvd's got this function the progressive it's for better resolution on plasma tv's

Aug 12, 2012 | Protron PD-DVR100 DVD Recorder

1 Answer

NO VIDEO BUT HAVE SOUND


Good day! Try to check the rca jack video input.Replace it with new one if defective. Also check the progressive scan features if activated. If it is activated check your TV if supported by progressive scan features, because some TV is not supported by progressive scan.You can deactivate it by turning off or activate the interlace mode.Press the open/close to open disk tray. And press the numeric keypad 1 for few seconds. Hope its help.

Sep 07, 2011 | Philips DVP-3005 DVD Player

1 Answer

I am usin the components port to connect my Sony home theatre DAV-DX250 to my TV Sony Wega, and it doesn ot work, I just get static. Any idea what the problem is? thanks in advacne


Hi,
You need to turn On Progressive Scan mode in home theater system to get video output in component video out ports so tv can show its picture.
Progressive Scan mode can be turned On by going into setup menu of home theater, details are available in user manual.
Thanks.

Nov 29, 2010 | Sony DAV-DX250 System

1 Answer

Picture is black and white


If you have it connected to the 'antenna input' on your TV, change the channel up or down, and then back to 3/4 as appropriate. Sometimes the signal from the machine does not match exactly what the TV is looking for, but the TV will figure it out after you change the channel up or down. The AFC (automatic frequency control) will then try to re-tune the channel.
If you have it connected using the composite, and r/w audio, then you likely have a problem inside the DVR.
tom

Feb 16, 2009 | Protron PD-DVR100 DVD Recorder

4 Answers

How to reset (manually) factory defaults?


Press Setup,Right Arrow,Press Down 3 Times,Then Enter 2 times this should reset factory settings, I Hope This Is Correct As I Realize You Cant See The Menu But I Studied The Manual And Wrote Out The Exact Key Movements To Navigate The Restore Factory Settings menu. Hope This Helps
Sincerely,
Michael Scott

Nov 16, 2008 | Protron PD-DVR100 DVD Recorder

1 Answer

Magnavox MDV560VR DVD/VCR combi


f you accidentally set Progressive Scan to ON (within
Analog TV), press STOP 9 for five seconds to restore the
picture to normal operation.

Aug 13, 2008 | Philips Magnavox DVD/VCR Dual Player

1 Answer

Showing red image


Make sure red is matched up to red, green to green, and blue to blue first. Then, try a different set of YPbPr (component) cables if you have a set available. If it still shows up red, then read this:
If you are using a Progressive Scan TV
(TV must indicate Progressive Scan or
ProScan capability), to activate TV
Progressive Scan, please refer to your TV
user manual. For DVD system Progressive
Scan function, see page 28.
Helpful Hint:
– If your TV does not support Progressive
Scan, you will not be ab le to view the picture.
Press and hold OPEN/CLOSE button and
press ‘1’ to deactivate progressive scan.

Progressive Scan - turning on/off
To select this item, you must set “Video
Output” to Y PR PB and ensure that your
TV has progressive scan (See page 11.)
Follow the steps of “Using the Setup
Menu” and select :
> PROGRESSIVE
OFF
ON
PROGRESSIVE SCAN OFF
TV SHAPE
TV SYSTEM
VIDEO OUT
PROGRESSIVE
SCR SAVER
SMART POWER
OFF
Select this to disable Progressive scan
function.
ON

These are pp. 11 and 28 of your owner's manual for the HTS

If these methods still fail, try turning your TV's progressive scan off or on.

-Tha Mp3 Doctor

Jan 08, 2008 | Philips HTS3410D/37 700W DVD Home Theater...

Not finding what you are looking for?
Avion AV-DVR100 DVD Recorder Logo

394 people viewed this question

Ask a Question

Usually answered in minutes!

Top Avion Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75283 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Cindy Wells

Level 3 Expert

5380 Answers

Are you an Avion Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...