Cl blinking and - Frigidaire 24 in. GLD2150RCC Built-in Dishwasher

means that the toner cartridges are just about out of ink and need replacing
BK=black and CL= color

LG Washer Error Code Cl Fix - ApplianceRepairLesson.com

www.appliancerepairlesson.com/.../cl-error-on-lg-washer-repair-help-lg-t...

Jan 19, 2011 - CL means that your washing machine's CHILD LOCK is ON. You canfind ... CL popped up on my display had no idea what it was because the manual didn't say. ... I have the touch screen panel and it does not have temp or option buttons ... I've had tried to reset but won't do do I press temp and what else

How does Child Lock work on my washing machine?

www.samsung.com/au/support/skp/faq/868833

Samsung ElectronicsOct 23, 2015 - If the Child-Lock function is activated, the Child-Lock icon will blink. ...If 30 seconds have passed after opening the cover when the Child-Lock ... Step 5: To clear "CL" error on the display, close the door of the washer after ...

[PDF]Washing Machine - Home Depot

www.homedepot.com/.../d7064d64-8ea1-487d-9c35-a...

The Home DepotJan 3, 2015 - Warnings and Important Safety Instructions in this manual do not ... Donot wash or dry articles that have been previously cleaned in, washed in, soaked ......the Reset water level, "CL" is displayed on the LED display without.

You have the code?

Hi

Error CL appears when the dishwasher control detects door switch is open or door is open. You'll have to open the door and check the continuity of the door switch. If the door seems to be closed then it is the control has detected an issue with the door latch. Check the door latch & seals to make sure door is closing fine. Unplug the dishwasher from power outlet and wait for 10-15 minutes. Restart the dishwasher and check if the error is still there. If error still appears then you'll need to repalce the door switch/door latch. Hope this helps... Please post back for further assistance.

Daniel

Try disconnecting the battery cable again, but leave it off for at least 10 minutes. That will reset the computer, not sure if it will help w/ theft system though. Good Luck, Also try locking and unlocking the driver door w/ the key (not a remote) this may work.

shut down electric to dwasher to reset board

CL is the clock. Set the time and date on the lower right hand side of answering machine.

did you try to reset the functions on the phone

The blinking " CL " is the code that tells you the clock needs setting, any type of power interuption will cause this . To set this , Look to the back of the answer machine / dock there you can set the day and time by holding in the desired button untill it reaches the desired setting.