Sakar amplifired caller id telephone

I am not aware o all checks you've made. But: Many hand sets has it own battery and the main unit is plugged into the wall. Could you only need a BATTERY? I need more answers.

Who made this device? Contact customer support.

How long ago did you phone them? Perhaps they have lost your details. Phone them again.

Try their website www.sakar.net

The switch that the handpiece activates is not working. Could be optical, magnetic or physical. It may need cleaning, adjusting or a wire connection repaired. Also check the curly cord and its connections between the handpiece and telephone.

Not all systems require the area code. In fact if I am calling a number in my area from the ID caller & it has the area code shown, I must hit the pound key to erase the area code to make a connection. If it shows only the area code & it is a long distance call, I hit the star key to add a one in front of the existing number.

Hi

Thanks for using FixYa. I think you have stored more than 100 Caller ID messages and hence the caller ID is not showing on Uniden Tru8888. In the following cases the caller ID will not be shown-

If you answer a call before the Caller ID message is received (for example, before the second ring), the Caller ID message will not appear.

When the call is received via a telephone company that does not offer Caller ID service, the caller’s phone number and name does not appear. (This includes some international calls.)

When the call is via a private branch exchange (PBX), the caller's phone number and name may not appear.

You may receive any one of the following messages:

When a private name is received; Private Name
When a private number is received; Private Number
When a unknown name is received; Unknown Name
When a unknown number is received; Unknown Number
When invalid data is received; Incomplete Data

The Caller ID list stores information for incoming calls - even unanswered calls. You can store up to 100 Caller ID messages and phonebook entries (including Speed Dials) for each handset and the base. You can view the Caller ID list through the handset or base during a call or when the phone is in standby mode.

Memory locations for Caller ID messages and Phonebook entries (including Speed Dials) are common, you can store up to all 100 entries for each handset and the base. Caller ID messages are not stored when you have 100 phonebook entries. When you have stored a total of 100 phonebook entries and Caller ID messages, the oldest Caller ID message is overwritten.

Please do rate the solution and revert for further assistance.


Thanks
Rylee

unplug the telephone cable from the back of the receiver and plug it a basic telephone to check if there is a dial tone. if there is a dial tone restart the receiver without the the telephone line plugged in. after it loads and u have a picture, plug in the telephone line. call the home to check. if its not working the modem in the receiver has gone bad.

In this case just remove the battery and the connections and keep the phone idol for about 15-20 Min and after that replug it in and it will not do that again.... Good Luck..........

the issue is that sakar phone does not support the option. you will hear a beep noise when you have a call waiting. they do not support to get you the number of who is calling..

This Telephone doesnt have a capability to work with shared connections where u use more than one phone in one connection.......... And this phone cannot be charged it works in either battery or Adapter...... Good Luck......