Question about Panasonic Lumix DMC-LS2 Digital Camera

1 Answer

I have a Lumix TZ4 that stopped working today. When I turn it on it says to turn the camera off and then on again and it leaves the lenses extended. I cannot do anything with the camera. Please help!

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,090 Answers

It is entirely possible that you have dirt or a grain of sand in the lens mechanism.
find some one with an air compressor or get a can of pressurized air and blow around the lens.
smack the camera lens down on your hand a few times ( not joking) and tuen it off and on to try and release the dirt holding the lens from setting up correctly keep persisting as in some cases it takes 20 -30 goes to get it free But it does woek belive me it happoened to me and when i was given this info i thought the guy was having a joke one me. But bingo! it finally worked

Posted on Jun 22, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Users manual(guide) for Panasonic dmc-tz4 digital point and shoot camera


Check THIS LINK to download the Panasonic Lumix DMC-TZ4 - Digital Camera

Hope this helps and just keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer. Thank you for using FixYa.

Jose.

Oct 20, 2011 | Cameras

1 Answer

Hello I have a panasonic DMC-TZ4 digital


You can download and print your camera manual, at no cost, here:

http://www.brynmawr.edu/llc/documents/DMCTZ4.pdf

Apr 22, 2011 | Panasonic DMC-TZ4 Digital Camera

1 Answer

My panasonic DMC-TZ4 keep opening&closing the lens non stop and telling me to turn the camera off&on again. I cant do anything else with it. What will it cost to repair this? and where do I send...


check for a reset button on camera ,,it will be small,,push with a small screw driver or ink pen without cap,,may be on botom,,check ur user manual to see,,

Nov 03, 2010 | Panasonic Lumix DMC-LZ2 Digital Camera

1 Answer

Panasonic Lumix DMC-TZ4 black - memory card locked


Remove the SD card and slide the lock switch on it to the unlocked position. If it's already there then slide it fully to locked and then fully back again.

If this fails then you need to try another SD card to see whether it's a camera fault. If the camera is at fault then there's nothing more you can do other than to return the camera to Panasonic for repair.

Nov 28, 2009 | Panasonic Lumix DMC-FZ18K Digital Camera

1 Answer

Water damage - screen asking to turn off camera


Hi!
The lens should be taken apart and cleaned. It could be a focus problem. In the worst case it could be a bad lens driver IC. It's a hardware fault not software so you should give it to a repair shop or Panasonic service center.

Sorry for the bad news.

Tom

Oct 09, 2009 | Panasonic DMC-TZ4 Digital Camera

1 Answer

Wont take pictures


First of all you should take a look to the little "guide" that I posted to the "stuck lenses" problem for LUMIX. But in your case the camera is very different, so: first thing you should do is (hoping that its just a simple stuck problem, try moving the zoom gently doing circular movements and then more gently in and out with the camera on. VERY GENTLY!!! if that does not help, try disassembling the camera, the structure is similar to the one I described in the text, although its parts are smaller and more delicate. Every LUMIX camera cheaper that $ 1500 seems to have this kind of problems... REMEMBER TO BE REALLY CAREFUL or your zoom will say good bye.

Feb 27, 2008 | Panasonic Lumix DMC-LZ7 Digital Camera

Not finding what you are looking for?
Panasonic Lumix DMC-LS2 Digital Camera Logo

Related Topics:

214 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Cameras Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

74251 Answers

Computer Links

Level 3 Expert

2385 Answers

Are you a Panasonic Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...