Question about Cakewalk Music Creator 4

2 Answers

Upon reinstalling mc4 i got an error

Reads as follows unable to register the dll ocx library failed code 14001

Posted by on

  • red6023 Jun 22, 2009

    that didnt do it i cant afford to pay anymore i'll just do without.

    thanks


×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 122 Answers

Ok, this is an error generated from C++, usually because it is missing the installation path. Uninstall MC4 completely and the Microsoft C++ Redistributable from your add/remove programs.

I recommend using Revo Uninstaller in advanced mode to remove all the created reg keys and other junk left behind by the normal uninstaller. Revo can be found here: http://www.revouninstaller.com/download/revosetup.exe

After removing, reboot the PC.

Go here and redownload and install the Microsoft C++ redist.

http://www.microsoft.com/downloads/details.aspx?FamilyID=32bc1bee-a3f9-4c13-9c99-220b62a191ee&DisplayLang=en

After reinstalling C++, reinstall MC4, and you should be good to go.


Posted on Jun 23, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 952 Answers

I've had the same problem with another program. Simply delete the file that is producing the error message then reinstall.

for example. you get this error message

H:\Program Files\GTA4\DLL\gta4.dll

Unable to register the DLL/OCX: LoadLibrary failed; code 14001.
This application has failed to start because the application configuration is incorrect.

Simply go to the folder and delete gta4.dll then reinstall the software

Posted on Jun 21, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Missing kernel32.dlll file


In most dll related problems. You can either have it totally gone or there is a version conflict...

1. Pinpoint the filename or which dll or ocx exactly fails...
2. Search for dll file from a site like http://www.dll4free.com or http://www.missingocx.com
3. Download and reinstall
4. That should done the trick...

Jun 03, 2012 | Sid Meiers Gettysburg

Tip

How to Register DLL files


On Microsoft Window's operating systems, a DLL stands for Dynamic Link Library. DLL's are relatively small files that include a library of functions- usually data that can be shared across multiple applications. DLL's are called upon by various applications and can be loaded and utilized by these applications concurrently.
Registering a DLL
There are two easy ways that a DLL can be registered in your Window's operating system's registry, the first is the simplest, known as self registering files, the second way is to manually register a DLL.

Self Registering Files

It should be noted that many DLL files are self registering, they include information required to store themselves in the operating system's registry. As the name states, self registering files require no human intervention. Self registering files will automatically store themselves on your machine and become accessible when needed. Besides DLL files, other types of files that are sometimes self registering include .EXE and .OCX.

Manually Register Files

The second method used to register DLL files on your computer is via manual registration. Manually registering a DLL file is quite simple and can be done in only a few steps.
1. The first step is turn on your computer, launching your Window's operating system.

2. Once your Window's operating system has loaded completely, click on Start and then click on Run.


4. Once the command is input into the Run field correctly, press Enter.

5. Once the DLL has been registered, you should receive a confirmation in the form of a pop up box. This message will list your newly registered DLL file and confirm that is was successfully registered into the registry.

on Aug 28, 2010 | Computers & Internet

2 Answers

When I right click on a website that is sent to me in my email, I choose, open in a new tab or window, I get this message on many of the links to websites sent to me by email. oops Internet Explorer could...


Dear klaireh,

Follow this steps to resolve the problem with opening links in outlook .

(In this resolution we are going to register the DLL files for the internet explorer and outlook )

1. Copy the whole command line below and paste it in a notepad .
2.Save the file as internet.bat
3.Right click on the file and click RUN AS ADMINISTRATOR

cd /d %SystemRoot%\system32
regsvr32 comcat.dll /s
regsvr32 shdoc401.dll /s
regsvr32 shdoc401.dll /i /s
regsvr32 asctrls.ocx /s
regsvr32 oleaut32.dll /s
regsvr32 shdocvw.dll /I /s
regsvr32 shdocvw.dll /s
regsvr32 browseui.dll /s
regsvr32 browseui.dll /I /s
regsvr32 msrating.dll /s
regsvr32 mlang.dll /s
regsvr32 hlink.dll /s
regsvr32 mshtml.dll /I /S
regsvr32 mshtmled.dll /s
regsvr32 Wininet.dll /I /S
regsvr32 msjava.dll /S
regsvr32 urlmon.dll /s
regsvr32 softpub.dll /S
regsvr32 wintrust.dll /s
regsvr32 initpki.dll /s
regsvr32 Dssenh.dll /s
regsvr32 rsaenh.dll /s
regsvr32 Gpkcsp.dll /s
regsvr32 sccbase.dll /s
regsvr32 Slbcsp.dll /s
regsvr32 plugin.ocx /s
regsvr32 sendmail.dll /s
regsvr32 scrobj.dll /s
regsvr32 mmefxe.ocx /s
regsvr32 corpol.dll /s
regsvr32 jscript.dll /s
regsvr32 msxml.dll /s
regsvr32 msxml3.dll /s
regsvr32 mssip32.dll /s
regsvr32 imgutil.dll /s
regsvr32 thumbvw.dll /s
regsvr32 cryptext.dll /s
regsvr32 rsabase.dll /s
regsvr32 inseng.dll /s
regsvr32 iesetup.dll /i /s
regsvr32 cryptdlg.dll /s
regsvr32 actxprxy.dll /s
regsvr32 dispex.dll /s
regsvr32 occache.dll /s
regsvr32 occache.dll /i /s
regsvr32 iepeers.dll /s
regsvr32 urlmon.dll /i /s
regsvr32 cdfview.dll /s
regsvr32 webcheck.dll /s
regsvr32 mobsync.dll /s
regsvr32 pngfilt.dll /s
regsvr32 licmgr10.dll /s
regsvr32 icmfilter.dll /s
regsvr32 hhctrl.ocx /s
regsvr32 inetcfg.dll /s
regsvr32 tdc.ocx /s
regsvr32 MSR2C.DLL /s
regsvr32 msident.dll /s
regsvr32 msieftp.dll /s
regsvr32 xmsconf.ocx /s
regsvr32 ils.dll /s
regsvr32 msoeacct.dll /s
regsvr32 inetcomm.dll /s
regsvr32 msdxm.ocx /s
regsvr32 dxmasf.dll /s
regsvr32 l3codecx.ax /s
regsvr32 acelpdec.ax /s
regsvr32 mpg4ds32.ax /s
regsvr32 voxmsdec.ax /s
regsvr32 danim.dll /s
regsvr32 Daxctle.ocx /s
regsvr32 lmrt.dll /s
regsvr32 datime.dll /s
regsvr32 dxtrans.dll /s
regsvr32 dxtmsft.dll /s
regsvr32 WEBPOST.DLL /s
regsvr32 WPWIZDLL.DLL /s
regsvr32 POSTWPP.DLL /s
regsvr32 CRSWPP.DLL /s
regsvr32 FTPWPP.DLL /s
regsvr32 FPWPP.DLL /s
regsvr32 WUAPI.DLL /s
regsvr32 WUAUENG.DLL /s
regsvr32 ATL.DLL /s
regsvr32 WUCLTUI.DLL /s
regsvr32 WUPS.DLL /s
regsvr32 WUWEB.DLL /s
regsvr32 wshom.ocx /s
regsvr32 wshext.dll /s
regsvr32 vbscript.dll /s
regsvr32 scrrun.dll mstinit.exe /setup /s
regsvr32 msnsspc.dll /SspcCreateSspiReg /s
regsvr32 msapsspc.dll /SspcCreateSspiReg /s
exit

Sep 20, 2010 | Microsoft Internet Explorer 8

1 Answer

Error message


hi,

You can go to this site ..
http://www.fix-all-dll-errors.com/ltkrn70n.dll/

as I registered few dll's from this site... pretty helpful...worked in my case :)

Jun 07, 2009 | Office Equipment & Supplies

1 Answer

How to register ocx on vista


[Solution # 1]
Drag and drop it onto regsvr32.exe in Windows\system32 folder. Make a shortcut for regsvr32.exe in the same folder the OCX is in and drag and drop it that way

[Solution # 2] Just run cmd.exe as administrator and try again. This is the key.

Here, step by step:

1. find the folder of cmd: it is usually on C:\windows\system32\cmd.exe
2. Do right click over cmd.exe and click on "run as Administrator"
3. now just use regsvr32.exe as you used to do!

For example, to register most Blackd Proxy ocxs, you might need to type this in "Administrator" cmd:

regsvr32.exe c:\windows\system32\richtx32.ocx
regsvr32.exe c:\windows\system32\comdlg32.ocx
regsvr32.exe c:\windows\system32\mswinsck.ocx
regsvr32.exe c:\windows\system32\msflxgrd.ocx
regsvr32.exe c:\windows\system32\msinet.ocx
regsvr32.exe C:\windows\system32\comctl32.ocx

A side result for Visual Basic 6.0 users: this seems to be the way to use components in Windows Vista properly. Just register the components of your proyect with "Administrator" cmd before adding them to your proyect (or before opening a proyect that already had such components)


[Solution # 3]
use this in command line

REGSVR32 /V then ur ocx or dll name
ex:
REGSVR32 /V CRPAIG32.DLL


[Solution # 4]
right-clicking the batch file and selecting 
'run as administrator'.

Registered:
richtx32.ocx
comdlg32.ocx
mscomctl.ocx
dxtmeta2.dll


Good luck

Mar 03, 2009 | Microsoft Windows Vista Ultimate Edition

2 Answers

AegisE5.dll was not found.


hi,

http://www.fix-all-dll-errors.com/aegise5.dll/
u can go to this site...

as I registered few dll's from this site...worked in my case :)

Jan 03, 2009 | Televison & Video

1 Answer

Errormessage keeps coming up Application has failed to start because msjter35.dll was not found reinstalling the application may fix this problem


After you download "*.Dll"(file extension dll) on your machine, copy it to
windows/system32/
Go to "start" ==> "run" and type "regsvr32 *.dll" to register the file to the system. For windows 95/98/xp/2000/vista,and win vista,no dlls is corrup!

where should this file go?
Please copy it to windows/system32/

We offer Free System Scan for Dll errors, ocx errors,and thousands of other frustrating Windows errors.Speed up your computer.
http://www.dll-download-system.com/dlls-download-m-/msjter35.dll.html


you will find the link and you can download this file

Dec 02, 2008 | HP Computers & Internet

1 Answer

RTHDCPL.EXE err


Error Message after Installing Security Updates 925902 and 928843 This afternoon (April 3rd, 2007) my Automatic Updates alerted me about a couple updates I needed to install, so I did. Upon rebooting the computer though I was confronted with the following error message
"RTHDCPL.EXE - Illegal System DLL Relocation"

"The system DLL user32.dll was relocated in memory. The Application will not run properly. The relocation occurred because the DLL C:\WINDOWS\SYSTEM32\HHCTRL.OCX occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL."
  


Cause of Error Message

Turns out this error occurs when the Realtek HD Audio Control Panel by Realtek Semiconductor Corporation is installed. This is my built-in sound card on my computer.

The HHCTRL.OCX file that is included in the Security update 928843 and the User32.dll files that is included in Security Update 925902 have conflicting base addresses. When Windows loaded the HHCTRL.OCX file before it loads the User32.DLL file, the problem occurs.

The error occurs when the following third party programs or applications are installed on a computer with Windows XP Service Pack 2 installed. 
Realtek HD Audio Control Panel
ElsterFormular 2006/2007
TUGZip
CD-Tag
Microsoft now has released a patch to correct the problems, you can go to the following link to download and install the patch for the patch :-)

http://support.microsoft.com/kb/935448

Oct 18, 2008 | Computers & Internet

1 Answer

PCHARGE EBT


I'm assuming you are using the PSCharge.dll to integrate regular credit card sales. The dll is fine for credit transactions and such, as long as there is no hardware involved. Since I'm way late on answering your question, you now have to options. The old option would be to integrate the device.ocx into your POS for comunnication with the hardware needed (i.e. pinpad for debit and ebt). If you have an updated Dev Kit, there is now a new integration library (SIM.dll) which is a .NET assembly which includes support for the traditional PSCharge classes as well as the hardware classes previously only included in device.ocx and the individual hardware ocx's. The SIM.dll can be used in win32 code, although the VFI documentation does not go into detail on this. I've done the integration with this library in Delphi, using a tlb for the SIM assembly and the MSCorlib assembly. These methods are little more involved than a simple post, but it can be done. So, to answer your question, device.ocx, or the new SIM.dll library will allow you to integrate to hardware devices.

Mar 12, 2008 | Go Software Inc. PCCharge DevKit for PC

Not finding what you are looking for?
Cakewalk Music Creator 4 Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cakewalk Computers & Internet Experts

Cindy Wells

Level 3 Expert

5384 Answers

Parshiv Luthra

Level 3 Expert

383 Answers

Anbes
Anbes

Level 2 Expert

40 Answers

Are you a Cakewalk Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...