Question about GE Tritonr XL GSD6260JCC Dishwasher

2 Answers

Triton XL detergent dispenser won't stay closed

How can I address this problem. I've looked on GE website for replacement part-no luck.

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 240 Answers

Well this is not a solution by any means but I would just put the tablet or powder directly into the machine-just "chuck it in". It will work just the same. The dispenser itself isnt truly necessary.

Posted on Jun 21, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Common problem with these series (round door).
Two-part plastic linkage, operated by the timer motor.
If soap dispenser door "springs-back" when you attempt to close it, the lower part is probably OK.
Upper plastic arm, at timer has a spring, connected to a plastic pin by the timer motor. Often this pin breaks off. If this happened, the soap door won't latch properly. Upper arm could also be broken, but usually it's the pin. May be able to use a small sheet-metal screw to secure the upper arm spring.

Posted on Dec 29, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How is the china and crystal wash cycle different from the regular cycle on my GE Triton XL dishwasher? Can I use regular dishwasher soap on my china and crystal?


Most dishwashers that employ this setting use a lower temperature for the water and also they do not use the element to dry the dishes, they are air dried. China and crystal are very sensitive to changes in temperature and can crack easily. They should always be washed by hand however if you have to use the dishwasher make sure you have a mild detergent. No bleach or acid should be contained. If it says citrus anything it has acid in it. Also use half the amount of detergent regardless of its strength. Hope this helps. Good Luck!

Jul 19, 2011 | GE Tritonr XL GSD6260JCC Dishwasher

1 Answer

The detergent cup lid stopped closing on my old GE Model # GSD600G-0l dishwasher. Tried turning the dial clockwise to the Off position, but it won't work.


Hi,
There are three common problems that cause the Soap Dispenser or Cup not toopen. I have a tip that will explain these problems in detail....

Dishwasher Repair Problem Detergent Cup does not Open

heatman101

May 10, 2011 | GE Dishwashers

1 Answer

My GE Triton XLdishwasher, model GSD6300 Gooww is leaving a


The problem is hard water. www.dishwasherfilter.com has a great new product out that will solve this problem once and for all. It filters the water entering your dishwasher and leaves your dishes looking amazing. They even have a money guarantee if you are not completely satisfied. Check it out. You will love it.

May 15, 2010 | GE Tritonr XL GSD6260JCC Dishwasher

1 Answer

Detergent left in dispenser cup


You either do not have enough water getting itno the machine or it is not hot enough. 5 years old so I would suspect a plugged screen on the fill valve.
Eric

Dec 11, 2009 | GE Tritonr XL GSD6260JCC Dishwasher

3 Answers

Soap dispenser cover won't close


It sounds like it may be stuck between cycle steps.(this sometimes happens if the washer is open during a cycle)Try and run it through one full wash cycle as it is.Then check to see if the soap door will close.If not,the lack may be broken

Jan 09, 2009 | Bosch 24 in. SHU43 Built-in Dishwasher

1 Answer

GE TRITON XL REPLACEMENT SOAP DISPENSER?


Best way is to call GE Part at 1-800-626-2002 or go online to www.geappliances.com

Dec 20, 2008 | Dishwashers

1 Answer

GE Triton XL


Try placing a packet in the bottom of the DW and then start a wash cycle ( use the energy efficient cycle that does not use the heater to dry the dishes..).. if it is not disolved at the end of the cycle then your water temp may not be hot enough..Hope that helps..

Aug 28, 2008 | GE Tritonr XL GSD6260JCC Dishwasher

4 Answers

GE Triton XL Dishwasher


My Triton XL soap dispenser still has a clump of soap after the cycle has finished. My glasses are left with a cloudy film, and my silverware is left marked with film on it. I have cut down on the amount of detergent, and have not overfilled. I have also tried using white vinegar as the manual states. Any suggestions? Thank you

Aug 17, 2008 | Dishwashers

Not finding what you are looking for?
GE Tritonr XL GSD6260JCC Dishwasher Logo

976 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Dishwashers Experts

Mike

Level 3 Expert

4340 Answers

Garth Jackson

Level 2 Expert

93 Answers

jdthefixer

Level 3 Expert

744 Answers

Are you a GE Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...