Question about Kenmore HE2 Plus Front Load Washer

1 Answer

I have been trying to run the clean cycle on my kenmore he2 plus model # 110.4751 and the rl error code keeps coming up. I understand this to mean that the washer detected an item and needs it removed before it can continue. The problem is there is nothing in the washer. I get the error message everytime I try to run the clean cycle.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

It appears your timer/main controller/CCU has failed in this instance.

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 18, 2010

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
blueextc3221
  • 15935 Answers

SOURCE: kenmore he2 plus front loader washing machine

The rL error code during the clean cycle is likely caused by friction on the spin basket shaft since you indicate that you hear squeaking when the washer is spinning. The squeaking is normally caused by a bad bearing in the rear tub shell. I recommend that you have the washer diagnosed and repaired by a Sears service technician. This type of problem will normally require an extensive tear down of the washer to repair. It is not a problem that you can normally repair yourself.

Open the door & slowly rotate the spin basket to see if you can feel any kind of drag on the bearings. If the bearings check good, the control board is sensing a load & will need to be replaced.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

F-24 error code so I ran a clean washer cycle, and the laundry room is now flooded.


what's f24 code? - Kenmore Elite HE3 Washing Machine ...

https://www.ifixit.com/Answers/View/85549/what's+f24+code

iFixitAug 21, 2015 - Aiman, The F24 error code indicates a water temperature sensor reading that is ... The Kenmore Elite HE3 is a washing machine by Kenmore.

F24 Error Code on My Kenmore Washer ' eHow

www.ehow.com > Home
F24 Error Code on My Kenmore Washer. Kenmore washing machines have several high-tech features, such as a stain treatment option, reduced energy and ...

Kenmore HE2 Plus Front Load Washer F24 error code ...

www.fixya.com > ... > HE2 > Kenmore HE2 Plus Front Load Washer
...error code F24 I have a Kenmore HE2T washer and I keep getting an F24 error on it.. I have no idea what is means can't find the manual help!!! The "F24" error ...

I have a Kenmore HE2T error code F24 - Fixya

www.fixya.com/support/t3608391-kenmore_he2t_error_code_f24
Dec 9, 2009 - Posted on Dec 09, 2009.

Dec 06, 2015 | Kenmore HE2 Plus Front Load Washer

1 Answer

What does an rL error mean?


The rl code is displayed when the control detects a load of clothes in the washer during the clean washer cycle.

This code should only come up when you're trying to run a clean cycle.

There can be two causes for this message if there are no clothes in the washer while you're running the clean washer cycle.

The most serious cause of the problem would be the spin bearing. Try and turn the basket by hand and see if you fill any restrictions. The basket can drab because of the bearing or because there are clothes between the spin basket and outer tub. Turn the basket by hand and see if you notice anything.

You can also try to remove the belt and run the clean cycle and see if the problem repeats. If the code doesn't repeat with the belt off and there is nothing between the tub and spin basket most likely the spin bearing will have to be replaced. The bearing is part of the rear half of the tub and will require a complete tear down to change.

If the message rl repeats with the belt off then the most likely cause of this problem is the machine control board.

Mar 10, 2014 | Kenmore HE2 Plus Front Load Washer

1 Answer

I was running the clean cycle on my Kenmore front loading washer and it keeps stopping and reading rL. It wasnt having any probs working on reg cycles, only when I was trying to run the clean cycle. What...


The rl code is displayed when the control detects a load of clothes in the washer during the clean washer cycle.

This code should only come up when you're trying to run a clean cycle.

There can be two causes for this message if there are no clothes in the washer while you're running the clean washer cycle.

The most serious cause of the problem would be the spin bearing. Try and turn the basket by hand and see if you fill any restrictions.
The basket can drab because of the bearing or because there are clothes between the spin basket and outer tub.

Turn the basket by hand and see if you notice anything.

You can also try to remove the belt and run the clean cycle and see if the problem repeats. If the code doesn't repeat with the belt off and there is nothing between the tub and spin basket most likely the spin bearing will have to be replaced. The bearing is part of the rear half of the tub and will require a complete tear down to change.


The rL error code during the clean cycle is likely caused by friction on the spin basket shaft since you indicate that you hear squeaking when the washer is spinning.

The squeaking is normally caused by a bad bearing in the rear tub shell.

I recommend that you have the washer diagnosed and repaired by a Sears service technician.

This type of problem will normally require an extensive tear down of the washer to repair.

It is not a problem that you can normally repair yourself.

Open the door & slowly rotate the spin basket to see if you can feel any kind of drag on the bearings.

If the bearings check good, the control board is sensing a load & will need to be replaced.

If the message rl repeats with the belt off then the most likely cause of this problem is the machine control board.


http://media.fotki.com/1_p,sqfgswqgwssgwfwxgtqsskgwtqkq,vi/ssfqsqssrxkbbdrggfw/1/1303472/5961857/image34400img-or.jpg



Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question!!!!!!!!!!

Sep 15, 2010 | Kenmore HE2 Plus Front Load Washer

1 Answer

My kenmore he plus did not drain and spin, I tried to start a the clean cycle and there is a code "rl". what is wrong?


The rl code is displayed when the control detects a load of clothes in the washer during the clean washer cycle.

This code should only come up when you're trying to run a clean cycle.

There can be two causes for this message if there are no clothes in the washer while you're running the clean washer cycle.

The most serious cause of the problem would be the spin bearing. Try and turn the basket by hand and see if you fill any restrictions.
The basket can drab because of the bearing or because there are clothes between the spin basket and outer tub.

Turn the basket by hand and see if you notice anything.

You can also try to remove the belt and run the clean cycle and see if the problem repeats. If the code doesn't repeat with the belt off and there is nothing between the tub and spin basket most likely the spin bearing will have to be replaced. The bearing is part of the rear half of the tub and will require a complete tear down to change.


The rL error code during the clean cycle is likely caused by friction on the spin basket shaft since you indicate that you hear squeaking when the washer is spinning.

The squeaking is normally caused by a bad bearing in the rear tub shell.

I recommend that you have the washer diagnosed and repaired by a Sears service technician.

This type of problem will normally require an extensive tear down of the washer to repair.

It is not a problem that you can normally repair yourself.

Open the door & slowly rotate the spin basket to see if you can feel any kind of drag on the bearings.

If the bearings check good, the control board is sensing a load & will need to be replaced.

If the message rl repeats with the belt off then the most likely cause of this problem is the machine control board.


http://media.fotki.com/1_p,sqfgswqgwssgwfwxgtqsskgwtqkq,vi/ssfqsqssrxkbbdrggfw/1/1303472/5961857/image34400img-or.jpg



Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Sep 08, 2010 | Kenmore HE2 Plus Front Load Washer

2 Answers

My washing machine is a kenmore model W10071750 and it keeps flashing rL. I cannot find this error code in the manual. I tried reloading it and restarting it. That did not work.


It may be a long shot, but it's worth a try before engaging in an expensive service call. Pull the plug - count to 60 - replug. Mine is washing again.

Aug 24, 2010 | Kenmore HE2 Plus Front Load Washer

1 Answer

My kenmore HE2plus washer gives an error code (rL) when we try to do the cleaning cycle.


The rl code is displayed when the control detects a load of clothes in the washer during the clean washer cycle.

This code should only come up when you're trying to run a clean cycle.

There can be two causes for this message if there are no clothes in the washer while you're running the clean washer cycle.

The most serious cause of the problem would be the spin bearing. Try and turn the basket by hand and see if you fill any restrictions.
The basket can drab because of the bearing or because there are clothes between the spin basket and outer tub.

Turn the basket by hand and see if you notice anything.

You can also try to remove the belt and run the clean cycle and see if the problem repeats. If the code doesn't repeat with the belt off and there is nothing between the tub and spin basket most likely the spin bearing will have to be replaced. The bearing is part of the rear half of the tub and will require a complete tear down to change.


The rL error code during the clean cycle is likely caused by friction on the spin basket shaft since you indicate that you hear squeaking when the washer is spinning.

The squeaking is normally caused by a bad bearing in the rear tub shell.

I recommend that you have the washer diagnosed and repaired by a Sears service technician.

This type of problem will normally require an extensive tear down of the washer to repair.

It is not a problem that you can normally repair yourself.

Open the door & slowly rotate the spin basket to see if you can feel any kind of drag on the bearings.

If the bearings check good, the control board is sensing a load & will need to be replaced.

If the message rl repeats with the belt off then the most likely cause of this problem is the machine control board.


http://media.fotki.com/1_p,sqfgswqgwssgwfwxgtqsskgwtqkq,vi/ssfqsqssrxkbbdrggfw/1/1303472/5961857/image34400img-or.jpg



Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Oct 19, 2009 | Kenmore HE2 Plus Front Load Washer

1 Answer

Kenmore he2 plus front loader washing machine comes up with an error code or rL


The rL error code during the clean cycle is likely caused by friction on the spin basket shaft since you indicate that you hear squeaking when the washer is spinning. The squeaking is normally caused by a bad bearing in the rear tub shell. I recommend that you have the washer diagnosed and repaired by a Sears service technician. This type of problem will normally require an extensive tear down of the washer to repair. It is not a problem that you can normally repair yourself.

Open the door & slowly rotate the spin basket to see if you can feel any kind of drag on the bearings. If the bearings check good, the control board is sensing a load & will need to be replaced.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Jul 10, 2009 | Kenmore Washing Machines

2 Answers

Error code RL keeps occuring when washer is in CLEANER MODE


rl code is load detected in drum during cleaning washer cycle. Book answer is to remove clothes and start the cycle again. Here's everything that Whirpool doesn't want you to know or do to your machine. Don't blame me if you do anything that damages your product. This is a link to the on-line 'technician' only service manual for your washer.

http://www.scribd.com/doc/7075573/Whirlpool-Kenmore-HE2-Plus-Troubleshooting-Tech-Sheet-8540259

May 09, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

HE2plus. I keep getting rL on clean washer cycle.


The rl code is displayed when the control detects a load of clothes in the washer during the clean washer cycle.

This code should only come up when you're trying to run a clean cycle.

There can be two causes for this message if there are no clothes in the washer while you're running the clean washer cycle.

The most serious cause of the problem would be the spin bearing. Try and turn the basket by hand and see if you fill any restrictions.
The basket can drab because of the bearing or because there are clothes between the spin basket and outer tub.

Turn the basket by hand and see if you notice anything.

You can also try to remove the belt and run the clean cycle and see if the problem repeats. If the code doesn't repeat with the belt off and there is nothing between the tub and spin basket most likely the spin bearing will have to be replaced. The bearing is part of the rear half of the tub and will require a complete tear down to change.


The rL error code during the clean cycle is likely caused by friction on the spin basket shaft since you indicate that you hear squeaking when the washer is spinning.

The squeaking is normally caused by a bad bearing in the rear tub shell.

I recommend that you have the washer diagnosed and repaired by a Sears service technician.

This type of problem will normally require an extensive tear down of the washer to repair.

It is not a problem that you can normally repair yourself.

Open the door & slowly rotate the spin basket to see if you can feel any kind of drag on the bearings.

If the bearings check good, the control board is sensing a load & will need to be replaced.

If the message rl repeats with the belt off then the most likely cause of this problem is the machine control board.


http://media.fotki.com/1_p,sqfgswqgwssgwfwxgtqsskgwtqkq,vi/ssfqsqssrxkbbdrggfw/1/1303472/5961857/image34400img-or.jpg



Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Mar 03, 2009 | Kenmore HE2 Plus Front Load Washer

1 Answer

Code "rL" means???


Code rL or F34 --> Load detected in machine at the beginning of the clean cycle. Push stop, remove clothes from washer & try again. Mine did this to me, even though there was nothing in the washer. I just tried it a second time & all is good again.

Feb 18, 2009 | Kenmore HE2 Plus Front Load Washer

Not finding what you are looking for?
Kenmore HE2 Plus Front Load Washer Logo

732 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal DeAngelo

Level 3 Expert

2183 Answers

fordexpert

Level 3 Expert

5522 Answers

Ed Mac

Level 3 Expert

731 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...