Toto Aquia II Dual Flush Toilet Logo

Related Topics:

A
Anonymous Posted on May 02, 2014

Toto Aquia II toilet not flushing all on first flush

2 Related Answers

kachbibi1

Bill Dickerson

  • 979 Answers
  • Posted on Jan 28, 2009

SOURCE: I purchased a Toto Aquia

If this is one of those models that most people have, the valve that shuts the incoming water off when the tank is filled is probably bad. It only costs about 8-10 dollars to replace. This valve is actually a stem or tree shaped device.

Ad

Anonymous

  • 145 Answers
  • Posted on May 18, 2010

SOURCE: Aquia II Dual Flush Toilet: toilet after flush removes to much water from bowl...

Adjust the float on the Fluid-master a little higher if possible. This should allow more water to enter the bowl after the flush.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

The dual flush push button flushing unit on my Toto cistren is not working

the connection rod under the lid is broken or not making the connection just lift the lift to see.
5helpful
2answers
0helpful
1answer

Aquia II Dual Flush Toilet: toilet after flush removes to much water from bowl...

Adjust the float on the Fluid-master a little higher if possible. This should allow more water to enter the bowl after the flush.
0helpful
1answer

REMOVAL OF TOTO AQUIA TOILET

first shut off water and then flush the john. this will remove most of the water. for water remaining in tank us a sponge or similar to remove remaining water. find where toilet bolts to floor and remove these bolts or nuts. then pick whole toilet from floor, there should be a wax ring under toilet, replace wax ring when putting back in. when putting back in just push down on toilet to squish wax ring and bolt to floor, turn on water and check for leaks. good luck
0helpful
1answer

My toto toilet has both 1.6 gal and 6 gal flushes. the short flush doesn't go down.

I am not a toto expert but i think i understand the gravity control toilet concept.A gravity flush tank type toilet flushes do to the force of water traveling from the tank to the bowl in a small passageway and forces the water in the bowl towards the integral trap in the toilet.In other words the water isnt dumping quick enough or the passageway is restricted.,My guess is the flush valve isnt dumping all at once.
2helpful
1answer

Looking to buy/install Toto Aquia II in my circa 1964 co-op apt.

When you say 10.5 inches from wall, do you mean that from the center of the drain in the floor to the back wall is 10.5 inches? If so, you need a toilet for a "10 inch rough-in" dimension. The Aquia doesn't come in that dimension. Sorry!

Caroma Sydney Smart model 270 comes in a 10 inch rough-in and is a dual flush model. Note that all dual flush toilets are fairly expensive as compared to normal toilets. HOWEVER, genrally speaking, ALL 10 inch rough-in toilets are fairly expensive just because the low volume that are sold.
0helpful
1answer

I purchased a Toto Aquia II Dual Flush Toilet, around a year ago. No problems until now. The toilet won't flush. It doesn't appear to be running at all.

If this is one of those models that most people have, the valve that shuts the incoming water off when the tank is filled is probably bad. It only costs about 8-10 dollars to replace. This valve is actually a stem or tree shaped device.
0helpful
1answer

FAMILIAR WITH TOTO AQUIA TOILETS AT ALL?

Everything you need to know about Toto! Hope it helps!
http://www.totousa.com/Default.aspx?tabid=215#

Not finding what you are looking for?

81 views

Ask a Question

Usually answered in minutes!

Top Toto Home Experts

john h

Level 3 Expert

29494 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Toto Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...