In Canada. I need the white presser foot control
Try Central sewing Machines in Edmonton Alberta. Looks like they have it in stock
SOURCE: Elna serger 925 presser foot lift lever broke off.
Here are 2 dillers that will repair it for you.
Sew Pros Inc
393 Broadway
El Cajon, CA 92021
(619) 442-3100
4.61 mi
Burdick's Chula Vista Sew
278 Third Ave
Chula Vista, CA 91910
(619) 422-5325
10.56 mi
Good luck and please rate
SOURCE: I moved recently and lost
Hi!!
You can order parts and accessories for your Elna Serger Sewing Machine on the following places:
http://sewingsupplywarehouse.com/elnasergerfeet.html
http://www.sew4less.com/
http://www.whitesewingcenter.com/elnaidentify.php
Good luck!! A HELPFUL - 4 THUMBS - rating for this solution would be greatly appreciated. Thank you for using FixYa!!
SOURCE: I have a Elna Pro 945 serger. I would like to use
try this link http://www.youtube.com/watch?v=bC-bJE5zwzw&feature=related for movie of a Pfaff piping foot in action, the principal would be similar, you are wrapping bias strip around cording on left of foot and overlocking right side. You can also do this with fabric top and botton thereby inserting the piping as you make it.
I have not tried this technique myself as I've only bought a blind hem foot for my Bernina but must admit I have used that a bit in the past.
Most serging techiques are very similar across the brands.
SOURCE: The presser foot lever on my Elna 945 is
here is a link to the service manual for the 925 http://www.arizonaexpressionz.com/elna_service/925_704%20suppl.%20service%20manual.pdf
I can't see one for the 945 but the above manual may give you some guidance as to what the replacment involves.
945 is a fairly new model so you may find that taking it to a pro and getting the timing and loopers checked at the same time is worthwhile. Also being computerised model, if you get something wrong and the computerised part is affected it could turn out more expensive to then take it to an Elna dealer.
I get my Bernette serger serviced every 2 years and it is now over 19 years old, and still performing well.
101 views
Usually answered in minutes!
×