old garage door motor finally had to be replaced but I have a keyless remote on outside of garage for kids cant remember how to program it to work with new opener
The odds are the keypad will not work with your new opener. The radio frequency has been changed on the new openers. But if you want to try you just press and immediately release the smart/learn button on the motor unit and then walk over to the keypad and key in your 4 digit code and press enter. These instructions are for a wireless keypad.
I have just replaced 2 sets of safty sensors on my craftman door openers. They where damaged by a...
(More)
I have just replaced 2 sets of safty sensors on my craftman door openers. They where damaged by a chewing puppy. The problem is that the sensor lights will not come on. Ohm readings at the opener with the wires unhooked tell me that the circuit is ok. Is there a reset button for this circuit? What amount of voltage should I find on this circuit?
Liftmaster Elite Series 3800 garage door will not stay closed. It raises itself every time it...
(More)
Liftmaster Elite Series 3800 garage door will not stay closed. It raises itself every time it touched the floor? How dod we fix it ?
I am not able to program my Homelink (car) opener using the Learn button on my Liftmaster Formula I....
(More)
I am not able to program my Homelink (car) opener using the Learn button on my Liftmaster Formula I. I used the Rolling Code program. I went through all the steps, indicator light flashed rapidly, I released the button, but the garage door still won't open.
I have a liftmaster 102-1499A 03/2006 and yesterday it stopped working.. it attempts to move but...
(More)
I have a liftmaster 102-1499A 03/2006 and yesterday it stopped working.. it attempts to move but does not, then motor humms and light flashes 5 times.. i've removed the chain, looked at the gears.. all looks just fine.. .no burned electric smell..what the heck ??