Question about Bushnell PinSeeker 1500 20-5103 Rangefinder

1 Answer

I dropped it in a lake. it has water inside and of course does not work. What happe

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 133 Answers

If your rangefinder sez "WATERPROOF" on the on it.....Send it in and you will get it repaired. No cost to you.

Bushnell Repair Centre
8500 Marshall Drive
Lenexa, KS 66214

or call 800.423.3537

MTG

Posted on Jun 25, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Is the waterfall inside a lake in Portugal real?


It is a 'spillway' an overflow tube in a hydro-electric dam.

  • VOTD: Waterfall in a Lake? - Joe For America joeforamerica.com/2016/03/votd-waterfall-in-a-lake It's not completely natural waterfall though, ... VOTD: Waterfall in a Lake? ... A waterfall inside lake! !!(Portugal).
  • A Waterfall Inside a Lake. - Chonday.com www.chonday.com/Videos/waterallake4 Video embedded · A Waterfall Inside a Lake. Near Guarda, Portugal you will find Cov?o do Conchos, a surreal looking spillway that is part of the Conchos ... A Waterfall Inside a Lake.
  • May 22, 2016 | Plumbing

    1 Answer

    I drop my Nikon action 7x50 in the water lake How can I clean the inside moisture?


    The unit need cleaning and repair. Contact any technician. This is not a user repairable work.

    Aug 27, 2013 | Nikon Action Binoculars

    1 Answer

    My MP3 player fell in a lake. Is it possible it will ever work again? I feel horrible about this. Thank you


    I think you need to fully dry it out before you attempt to use it. If the lake was very dirty, it *might* be better to rinse with clean water, but I'm not sure.

    If you can partially dismantle it first, that will probably help it to dry.

    http://www.labnol.org/gadgets/ipod/drop-mobile-phone-ipod-water-fix-iphone/2707/ suggests putting it in a bowl of rice, which will tend to absorb moisture.

    Good luck

    Sep 12, 2010 | Philips GoGear SA3020/37 MP3 Player

    1 Answer

    Problem with Convertible Jet Pump 3/4HP RedLion - drawing water 300' from lake to cabin - when the pump is on it holds 50# pressure by itself but when tap is turned on the pressure drops to 30# then you...


    If I understand you correctly this is what you have:

    - A pump that draws water from a lake 300 feet from lake to your cabin (I assume the pump is at the cabin)

    - The pump kicks on to maintain pressure in a tank that distributes water to faucets in the cabin. The pump only turns on to pressurize the tank when water is being used (I am assuming).

    - When you turn on tap, pressure in the pressure tank drops to 30 psi, then you hear water sucking from the tank to tap and flow stops at tap. Then the pump finally kicks back on and pressures tank to 23 psi.

    - The pump is not used regularly.

    If water flow stops when the pressure tank is reading 25 psi, then likely the real pressure is 0 psi and pressure gauge is reading wrong. If this gauge is tied into a switch that starts and stops the pump, then this is probably your problem. You may have partial blockage in your pressure gauge/switch that is causing gauge to move too slowly to keep up with the actual pressure changes when water is being used. Ore the pressure gauge/switch may be broken. Pressure gauges are notorious for reading pressure when there is none. If you can unplug the pump and disconnect the pressure gauge/switch and check for blockage in the ports you should start there. You mentioned that this worked good for the last two summers, if if sits unused for long periods, it could promote bio-growth, rust and/or sediment in the connection to the pressure gauge. If you find blockage, remove it and flush it out. Reinstall the pressure gauge/switch and try it again.

    One other possibility is clogged strainer(s) / filter(s) in the water lines. It would not hurt to pull and check/clean any strainers / filters in the system including before the pump. I would even check at the lake for a strainer where the water enters the suction line to the cabin.


    I would not assume that the pump is the problem yet.

    Hope this helps.


    May 01, 2010 | Plumbing

    1 Answer

    Garmin had moisture inside,now screen is partly faded


    Sounds like water damage, did you drop it into a lake or something? It might need a trip back to Garmin for repairs.

    Jan 04, 2010 | Garmin Nuvi 760 Handheld GPS Receiver

    1 Answer

    I dropped my binoculars in the lake. What can I


    use a butter knife edge the lens take it out clean it then put it back with super glue

    Aug 24, 2009 | Optics

    2 Answers

    Drops signal as soon as location changes


    You may have a dead zone in lake area !! I experianced alot of signal lose on a lake in oklahoma last year !!! swampratt200 !! AAEEE!!!

    Jul 21, 2009 | Sanyo CRSR-10 SIRIUS Radio Receiver with...

    2 Answers

    New 1/2 hp jet pump with tank not working


    Your hose size is to small. Use a 2in black plastic line out to the lake. Inspect your foot valve, and
    take your pump apart to see if you may have a pebble stuck in it, and remove the inner workings
    and clean. Contaminates build up inside and need to be flushed out. Remember to replace the
    gasket. Tighten all your hose clamps. Once your ready to start, spray shaving cream on your
    fittings to see if your sucking air. I've been through it all and my pump works fine.

    Chuck

    May 03, 2009 | Plumbing

    1 Answer

    My nikon d40x got a little wet...


    Not really a solution, But my camera and I fell in a lake. I took it ALL apart and didn't touch it for four days. It turned on and worked, though I had to re-set all my settings. The only thing that doesn't work is the "trash" button, and I can live without it :) good luck!

    Mar 21, 2009 | Nikon D40x Digital Camera

    1 Answer

    Water damege


    That depens if the fog is inside or outside, outside it usually dries faster than inside. You are advised to let it dry at least another 24 hours , if the lens is still foggy after that , thab you must go to a repair shop to let it be cleaned.

    May 05, 2008 | Kodak EasyShare C613 Digital Camera

    Not finding what you are looking for?
    Optics Logo

    Related Topics:

    306 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Bushnell Optics Experts

    Joe Lalumia aka...
    Joe Lalumia aka...

    Level 3 Expert

    3186 Answers

    kakima

    Level 3 Expert

    102366 Answers

    Mark Campeau

    Level 1 Expert

    44 Answers

    Are you a Bushnell Optic Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...