Question about Hotpoint Ultima WF865 Front Load Washer

1 Answer

Cycle ctopped and is flashing f 05

My hotpoint washing machine has stopped half way through a cycle and is flashing f 05. my trouble shooter in back of info leaflet doesn't tell me what this means. can you help?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hotpoint Master
  • 3,463 Answers

F05 means pressure jammed on full.
Check pump for blockage, or filter if waher has one.
Please rate my solution.
Thanks.

Posted on Jun 21, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hotpoint aqualtis washing machine model AQXXL 129 PM my doors not locking stopping in a cycle ,and water not draining , and lights flashing


find a dealer and get a manual for the washer it will have a trouble shooting section will tell exactly what is wrong

May 17, 2014 | Washing Machines

1 Answer

Hotpoint aqualtis washing machine model AQXXL 129 PM , runs through the cycle then stops at times leaving water in the drum and all lights flash why ?


the pump could possibly be jammed. you will need to drain the machine and remove the filter to check for any obstruction

May 17, 2014 | Hotpoint Washing Machines

1 Answer

Hotpoint ultima washing machine is showing a fault


F 05 normally means there is a blockage or a fault with the pressure sensor. The common place for blockage is in the black pipe from the drum to the pump as it has a filter in here and clogs up. remove the pipe and clean the filter out and remove gunk from the pressure sensor on the side of the pipe as well. If that does not fix things the pressure switch could be faulty itself

Sep 13, 2009 | Hotpoint Ultima WF860 Front Load Washer

2 Answers

Flashing f - 05


Error f05 is a problem with the pressure system usually caused by a blockage. These are most commonly found in the pipe which is attached to the bottom of the drum.
Take off the access plate at the back of your machine and you can see it is secured by a large jubilee type clip.
Please be aware that there will be water in this pipe.
Hope this helps & thankyou for using Fixya.

Jan 24, 2009 | Hotpoint Ariston Aquarius WD420 Front Load...

1 Answer

Control panel flashing F05 ?


F05 denotes pressure switch jammed on full, check pump and draining out.
If still no go, then call an engineer.

Dec 05, 2008 | Hotpoint Aquarius WD63 Front Load...

3 Answers

Hotpoint wf740 washing machine


An F-05 error message means that the pressure switch is jammed on empty or a problem with pump.


The fault is associated with drain out (pump blocked or restricted in some way).

Small panel at rear of machine reveals the pump, pull of the two pipes (Plastic clips hard to get off, slide them sideways), remove wire and unclip pump from base of machine by lifting locking tab and sliding to the left, pump can then easily be cleaned.

Oct 01, 2008 | Hotpoint Aquarius WF000 Front Load Washer

1 Answer

Washing machine stops in middle of cycle


This problem used to happen to me with an older washer. It also had a buzzer as well as a flashing light.
I discovered it was the "off-balance" warning.
Next time, try shifting the clothes around so that all the weight isn't on one side of the washer drum

Feb 06, 2008 | Washing Machines

Not finding what you are looking for?
Hotpoint Ultima WF865 Front Load Washer Logo

Related Topics:

582 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

puggy666

Level 1 Expert

48 Answers

ptpumpman

Level 3 Expert

407 Answers

Cindy Wells

Level 3 Expert

5126 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...