Question about Air Tools & Compressors

1 Answer

I HAVE SPARE COIL PACK FOR A MITSUBISHI GALANT, LONG TIME AGO THE SPARK PLUG BOOT CAME OFF, NOW i HAVE A CODE OF PO304 CYLINDER #4 MISSFIRE. ONE OF THE CAUSE MAY BE A BAD COIL PACK, HOW CAN i REPLACED THE BOOT FROM THE ONE IN THE VEHICLE WITH THE SPARE i HAVE

Posted by on

  • yadayada
    yadayada May 11, 2010

    what is the question here?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 78 Answers

First, this is a Car Ignition question, not an air compressor question. Not sure how this got here.

Anyway, if the parts from the coil pack came off or the parts of the plug wires came off, replace them. Don't try to replace pieces of them. Just replace the whole thing.

The code you are reading will stay in the code buffer until cleared. Replace the part(s), run the engine until warm, then clear the codes and read them again after a few hours of driving.

Posted on Jun 25, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My car is showing a p0304 code and it wont start, it was running bad I think timing is off how do I fix


Please go to this site, It will give full details on po304. God-Bless! www.obd-codes.com/po304

May 21, 2016 | Cars & Trucks

2 Answers

Code po304 cylinder four misfire on 1999 ford explore sport fuel injected 4.0 litre 2wd


you have a bad spark plug wire on cylinder 4 or your ignition coil
(coil pack) is bad.

here is a good guide to testing coils and wires if you need it
How to Test the Coil Pack Ford 3 0L 3 8L 4 0L 4 2L

Jan 15, 2015 | Ford Cars & Trucks

2 Answers

Circuit codes p0300


that pertains to random secondary ignition missfire.possibbly another code to help pinpoint which cyl. is missfireing po304 #4 cyl. spark plug,boot/wire coil/or individual coil pack,ignition module.check in that order.need more info year,vin,etc.

Aug 25, 2014 | Cars & Trucks

1 Answer

Mitubishi galant misfire cylinder 3


Try cleaning Spark plug,if already done then go to coil pack,or the single coil. If not that check for codes,and go from there. Sorry I can't do more. Peace. God bless.

Dec 16, 2013 | 2003 Mitsubishi Galant ES V6

2 Answers

Missfire on cly. number 4


try putting a new coil pack on it they go bad-Denny

Nov 12, 2013 | 2007 Jeep Liberty Sport

1 Answer

2003 Mitsubishi Galant 2.4 cylinder 3 misfire


on thesae oldr cars 2 and 3 cylinder fire together same as 1 aND 4 ,without head under the bonnet i honestly couldnt tell you the answer but i might be inclined to suspect a valve not seating correctly all the time

Mar 27, 2013 | 2003 Mitsubishi Galant

1 Answer

Code 304 cylinder 4 missfire


Check the spark plug wire for #4

Check the spark plug #4

Check continuity on the coil pack for the #4 spark plug lead

Check the connector on the fuel injector--#4

Nov 13, 2009 | 2005 Dodge Stratus

2 Answers

Code po304 #4 cylinder mis fire


ck if you have spark at the coil for that cylinder. check the plug wire closely. if it has spark at the coil, then replace all the spark plug wires.

Oct 12, 2009 | 2000 Cadillac DeVille

1 Answer

1996 dodge caravan 3.0


code P0304 is a cylinder missfire code and means that there is a problem with ignition to that cylinder check the spark plug and the spark plug wire

Oct 18, 2008 | 1996 GMC Dura

Not finding what you are looking for?
Air Tools & Compressors Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Air Tools & Compressors Experts

John Trevino

Level 3 Expert

1388 Answers

Joe Garcia
Joe Garcia

Level 2 Expert

205 Answers

Brad Brown

Level 3 Expert

16147 Answers

Are you an Air Tool and Compressor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...