Question about Jackson 25 in. TempStar HH70 Free-standing Dishwasher

1 Answer

Central air unit/ Lux500 thermostat

I having probelm getting my central air to come on. I change the batteriesand still no air. and the number four just show on the display . The heats works and when I turn on the fan it works as well. Just not the central air.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 32 Answers

There is usually an overflow tray which has a shutoff valve when the tray is about to overflow water into your house. It is not located outside on your unit but inside where ever the condenser unit is. IF that tray is full of water, your unit will not turn on until it is emptied. Then you need to find out why the tray isn't draining...do you have a blocked drain pipe?

Posted on Jun 21, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Home air condition thermostat is blank. My home's central air condition stopped working. So the first thing I did was check the thermostat and it was blank. I then went down to the basement and got the...


Put new batteries in the thermostat. Make sure that the switch that power the furnace is in the "on" position. Sometimes people mistake that switch for a light switch and turn it off.

May 23, 2014 | Heating & Cooling

3 Answers

My A/C blowing air, but it is not cool. It has started freezing up. We just replaced the air filters and since then it is freezing up. We even gently cleaned the a/c coils before replacing the filters. ...


Hello, sounds like it is either a low charge or lack of airflow, what type of filter are you using? sometimes those filters that claim to be super effecient will actually cut down on your airflow and cause the ac to freeze up.

Jul 15, 2011 | Intertherm Heating & Cooling

1 Answer

I have (2) two 10 ton Air Conditioning units for central air and central heat. Which are: (2) Air-handlers upstairs and (2) pad mounted units outside. Each one has its own thermostat. I need to have...


You could do it with a wireless thermostat and just have 2 thermostats right next to each other with a sensor for the other one. I think that's your best option, look into a wireless thermostat.

Feb 08, 2011 | Heating & Cooling

1 Answer

Wire colours to numbers on thermostat


GOTO DANFOSS .COM AND THEY HAVE HOW TOS ON EVERYTHING WITH A CUSTOMER SERVICE CONTACT GOOD LUCK HOPE THIS HELPS.

Jan 22, 2010 | Heating & Cooling

1 Answer

Hello We have a Trane central air


Bad thermostat, improper wiring or bad circuit board in furnace. Turn off the disconnect outside.

Dec 30, 2009 | Heating & Cooling

1 Answer

Goodman CK30-1A Central AC Unit will not run by thermostat


double check your t-stat wiring your not getting 24volts to the contact at the cond. unit outside

Jun 20, 2009 | Heating & Cooling

2 Answers

Furnace runs on heat, air conditioner does not


If you have a Gas furnace in the Attic then the answer is yes. The outside condenser will not run if in fact you have a gas furnace.

Feb 11, 2009 | Ruud Central System Air Conditioner

1 Answer

20 year old central a/c heater not working


Check your thermostat and mode selector setting, thermostat setting should be set at warmer and mode selector setting should be at low heat or hight this is applicable for manual unit.
If it is a remote control just set the remote to heat mode.

sample only
d8936d5.jpg

Jan 02, 2008 | GE Quiet-Aire Ductless Split System Air...

Not finding what you are looking for?
Jackson 25 in. TempStar HH70 Free-standing Dishwasher Logo

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jackson Dishwashers Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

jhnolson

Level 3 Expert

822 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Jackson Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...