- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Double-check your flash settings. You mentioned the camera is in Auto mode, but the flash has separate settings from the camera's shooting mode. With the camera in shooting mode AUTO check the Flash settings (Auto, Red-Eye Reduction, Fill-In, Off) It may be set to 'fill' causing your photos to be too bright. Also, depending on how close you are to your subject the flash may not be needed. Using the flash when too close to your subject (less then 3 ft.) will cause bright/white photos. Turn the flash OFF if you are taking macro or photos closer then 3ft. If neither of these fix your problem, turn the flash mode OFF, and camera shooting mode to AUTO and in a naturally well lit area, take a photo, if the photo is still too bright, you may have something mechanically wrong with your camera.
I guess you are using the automatic mode ( not the "P" mode).
You should enable flash only when there is insuffient light.
If you use flash in broad day light, your pic will be whited out.
If you dont use flash in dark or low light, your pic will be dark or very dark.
So, when it comes of dark, try enabling the flash.
If its still dark, increase the flash compensation (the eV value).
If its still dark, increase the ISO number.
Hope these help.
YES YES YES YES YES YES YES there is a solution if that is the r3 thing. There is a menu button and the menu button has four arrows around it right??? Yeah, well, press the arrow pointing west to change the flash's power. And if that doesnt work just press the up button instead and that should bring you to a menu or something where you can change what kind of picture the camera will take. At least, thats what i think...
Upon startup lens emerges but when screen appears it is white whereas it normally displays whatever the lens sees.When the shutter button is pressed the camera will focus and take a white picture which can be deleted.The camera does not flash although flash is set to automatic and photo taken in a dark room.Camera flashes (weakly) with flash set to manual on.Lens is unobstructed and appears to be perfectly normal.Camera was not dropped.Batteries have been changed.