Question about LG WM-2277HW Front Load Washer

2 Answers

LG Washer wont start, no power

3 year old LG washer WM2277hwWill not start, no LED message or anything. Machine was powered, but just "blinked" and shut off all together. Checked power supply, power is being supplied. Pulled plug and let set. Tried again. No power or any power to display (no lights come on). Removed top panel and checked power to control panel circuit (front of machine). Found some signals going thru cables to circuit board.I'm assuming it is a main panel circuit or the circuit/panel board in front. What would I need to test to see if the main panel/circuit board is faulty? I had assumed that the front circuit board was faulty because I was not even getting light/LED coming on.

Update:
1) have replaced both display and main circuit boards
2) still no LED on main board

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I HAVE A BEKO 42WLH530HID TV, AND WHEN I TURN IT ON THE STANDBY LIGHT COMES ON BUT NO PICTURE OR SOUND, I KNOW ITS 1, OFF 3 CIRCUT BOARDS BUT DON,T KNOW WHICH ONE, CAN ANYONE HELP ?

Posted on Jan 29, 2014

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,784 Answers

Make sure there's power getting to the washer. Check for a tripped circuit breaker or a blown fuse. Check the wall socket for power. Sometimes the power cord disconnects at the washer, if this is the case, the wiring must be repaired or replaced.

Posted on Jun 21, 2009

  • Michael Masters
    Michael Masters Jun 21, 2009

    You will need to test the pin connectors for current. us a multimeter for this.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Makes noise in spin cycle and now it started smoking. Tub seems to spin more easy but i don't hear anything like a bearing.


LG WM2688H Front Load Washer Smoking power ... - Fixya

www.fixya.com > ... > LG > WM > LG WM2688H Front Load Washer
LG WM2688H Front Load Washer, smoking power related issues. ... is it worth trying to fix drum loud and rattles when on spin cycle, then smoke started pouring out of ...hi working till smoke came out the back and now no power - Unplug it. ... washer makenoise doing spin cycle smell smoke make the power cord warm to ...

LG 4280FR4048L Bearing - AppliancePartsPros.com

www.appliancepartspros.com > ... > Washer > Kenmore Washer Parts

Rating: 5 - ‎189 reviews - ‎$32.19
Burnt rubber smell at end of cycle from 11 yr old lg wm2277hw front load washer i hand spun inner drum it was ... Appliance: LG Washer WM2277HW ... Our LG "Tromm"washer (a.k.a. "Trommy Baby") started making a horrible ... The bearings were worn and made very loud noise in the spin cycle John A. • Punta Gorda, FL.

LG WM2455HW washing machine problem - YouTube

? 10:29
https://www.youtube.com/watch?v=__abhTwmi1I
Sep 15, 2010 - Uploaded by djmcarter
I also have an LG refrigerator, which makes a loud sound (it's the.... I am watching your video while mopping up water underneath the exact same machine right now. ... How to Fix an LG Front load washer machine that wont spin - Duration: 5:32. ...

Jan 19, 2016 | LG WM2277H Front Load Washer

1 Answer

Why is my Roper washer continuously running?


Could be a defective controller (there goes that $150)

Jan 18, 2016 | Roper Washing Machines

1 Answer

I have a high efficiency washer and I am unable to start my washer because the lid lock keeps flashing and will not lock. What do I do. This wager is not a year old.


Check the door catch see if there is anything stopping closure.if that is okay try resetting the machine.most reset by switching of from the wall socket.then hold the start button in for at least five seconds whilst switching on from the power point.it sounds like the child lock is trying to activate.read the manual to see if you can set this to default.

Jan 24, 2015 | Washing Machines

1 Answer

Led lights power and centrifugation problem


Hello Pedro, I am happy to assist you!

Often when a washer is blinking, it is because it needs to be reset to resume normal operations. Let's try reprogramming your washer by either flipping the household circuit breaker to the off position or unplugging it. It is necessary to wait approximately ten minutes and then turn your washer on. If resetting the power does not correct the issue, your washer could be experiencing a communication error with the control board or could have a wiring failure. I am fairly confident that an authorized service agent will be able to restore your appliance to its normal operating condition. You can often locate a qualified service technician on the manufacturer website.

Nov 09, 2013 | Frigidaire Affinity ATF7000E Front Load...

2 Answers

My fronter loader LG is not powering up. My son put in a load before going to bed. When we woke up the next morning we realized the washer wouldn't power up and it had flipped the circuit breaker. I...


OK, let's try this: Open the door and (with an empty washer) give the drum a hard spin (either direction) by hand. This uses the direct drive motor to in effect become a generator, and should light up the control. If control lights up only momentarily, then no line voltage is getting to the display board. I would suspect the line filter first. Take the top cover off by removing the lower screws on the plastic clips on the back side of the washer's top. Stand in front of machine and use the palms of your hands to sharply push back on the L and R edges of the top, about 2 inches, then lift top off. Track power cord into washer and on to a small rectangular box. (the line filter, which contain a non-replaceable fuse) Check if power is going in and comming out (heading for the main board) If power in but no power out, replace filter. After the filter, the power goes to the main board, which is in the top back Left hand corner. It has a plastic cover over it. When the machine is powered up, there is a red LED on the board itself which lights up.
Note: on a working machine which is connected to power, you can do the drum spin and the display board will light and remain on, without touching the power button.

That's about as much help as I can do from here. If you need more help, I suggest you contact an authorized LG servicer in your area. (find one from LG at 800-256-0000)

These are very good machines. I know of one guy, runs 10 loads a day, 365 days a year through his LG. Can't say he's never had a problem, but he is very satisfied and probably does more loads each year than that old Whirlpool did in 20.

Mar 05, 2011 | LG WM-2277HW Front Load Washer

1 Answer

My servis 1200 rpm washing machine wont turn on- a light keeps flashing? possilbe problems?


I've cleaned the compartment at the bottom from hair, hairpins, coins etc... But the problem is, washer sometimes starts without any problems, and does the job properly from start to finish or just don't want to work for a few days! Hundred of times switched on and off - the same scenario. Power led switches of, there is a noise of some switch moving inside of the washer, then another led starts to blink (the one under the start button) and there is no way to run the program. Bloody machine :(

Oct 01, 2010 | Washing Machines

1 Answer

Unit will not power up. No lights, nothing. Acts as if there is no power at the plug, but I have verified there is power. Unit was working earlier today. Finished last cycle, didn't know anything was...


we had the same **** issue with the lg washer. we fought with the company as it was only 1 year old. do you know they asked us if it was plugged in hello my husband is an electrician. they came out it needed all new brains. to bad i cant give you the brains because now the piece of **** wont finish a wash even when empty reads ue. its going out on the sidewalk for any ****** who wants to pay to fix it .

Mar 13, 2010 | LG WM-2277HW Front Load Washer

2 Answers

My LG Tromm WM2277HB washer shut down during a power surge and will not power back on. Have unplugged for several hours, still no good. Looked at solutions posted on this site and it appears my PCB board...


Well I for one would go along with your prognosis, it seems logical to me.. this IS a common occurance when this type of thing, a power surge happens.. Remember Occam's razor.

Feb 05, 2010 | LG WM2277HBW XL Front Load Stackable...

3 Answers

Lg washing machine drum light stays on and wont let me turn the


Solution. Unplug the machine. Hold the power button for 10 seconds. Plug back in. Push the power button and the washer should turn on. Walk away leaving the machine on. When I did this, I came back to find the drum light off and machine would start on command now. Good luck.

May 15, 2009 | LG Washing Machines

1 Answer

No power


No error code like PF Some times unplug for 2 hours.to 6hours for it to reset.

Jan 13, 2009 | LG WM-2277HW Front Load Washer

Not finding what you are looking for?
LG WM-2277HW Front Load Washer Logo

2,573 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1461 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Are you a LG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...