Colour code, I have a 2011 XJ6 and need the actual colour code for it. It is Copper/Black.

An OEM connector from your Ford dealership or a connector from a scrap vehicle of the same model, will have the correct colours.

Hi and welcome to fixya
You can print black pages with the color cartage. HOW ? just when you select the size of the paper A4 then ther is an option of colored printing or black if you have ink in the color cartage then it can be done that you can print black pages with that cartage
thanks hope that will be helpful

Most speakers have copper wire for positive and silver for negative. The connection will have red + for positive and black- for negative for both speakers.

Yes the green goes to your bare copper wire, it is the ground. Black to black and white to white.

Hi Gary The hob connectors have colour coded plug ins. They are starting from right to left the red connector is for the front right plate, the white is for the back right plate, the blue is for the the back left plate and the black is for the front left plate. Now I am not sure of the config in your country but another way to look at this is that The red dot 2000 W (large plate) is connected to the black harness and the red dot 1500 W is connected to the blue harness. The std large plate 1500 W is connected to the white harness and the red harness is for the 1000W small plate. The wiring onto the actual plates should be accrording to the colour codes as follows: The harnesses are all 4 wires and are colour coded blue white ( wiring block 1) , yellow white(block 2), white ( wiring block 3) and the red white block 4. The actual plates are numbered from left to right as 1,2,4,3. But my wiring write up takes it as standard 1 to 4 so do mot worry about the numbers on the plates as some plates have no numbers. Hope this helps.

The yellow and white wires take any white wire.I dont now why they dont tell you that.And just fit black to black and grey to grey that simple good luck pippall.

hello, my name is thedon052001 and i just pruchased the 1993 jaguar xj6 and there are some problems to it, the main problem is that the security system needs to be reset or taking out and i need an exhaust system and fuel pump what is the best thing for me to do

i will do it for 30€ no you cant do it yourself it requires a special machine----also it holds 1.47kg of R134 gas .why is it leaking perhaps the the seals need changing because r 134 gas attacks the seals which should be a putty coloured .if their black then these are only for r 12 gas .94 was the change over period from the gas types r 134 has a big radiator and r 12 has a small one in the top right hand corner

ok lori connect the fan wires like this-----white from fan to both white wires---blue from fan to red---black from fan to both black wires then copper wires to a ground.let me know.