Question about Washing Machines
Washing machine will not drain, stays on spin cycle for ever and is only draining a slight trickle. have checked filter and only found two small coins, removed them, still wont drain properly, tried to fluch hose through with tap, still wont drain through. just stays on spin cycle for ever!, very frustraiting!
Door locked light flashes.
After turning off at power point, then restarting unit will commence but light starts flashing again and machine stops
Posted on Jul 04, 2010
Remove drain hose from where it connects to the plumbing under the sink/tub. Inspect the spigot. If clogged, clean. If clean, then tilt machine back and remove drum to pump hose from pump. Check hose and also drain pump. Clear any obstructions.
Posted on Nov 03, 2007
Tips for a great answer:
Apr 04, 2014 | Whirlpool LHW0050PQ Front Load Washer
Apr 05, 2013 | Whirlpool Washing Machines
Sep 18, 2011 | Washing Machines
This issue usually occurs due to kinked drain pipe, clogged
drain filter or drain pump. First make sure that the drain is not clogged and
remove clogs if present. If no visible lint is present then remove the lower
front access panel to check the drain filter and drain pump for any clogs,
you'll need to clean the drain filter and drain pump completely. Hope this
helps... Please post back for any further assistance.
Aug 28, 2011 | Whirlpool Duet GHW9150P Front Load Washer
Hello & Welcome to FixYa
Error code 5d/Sd means suds have been detected. To solve this
problem you have to take the bottom front panel apart and then clean the drain
filter pump assembly completely, make sure the washer is unplugged before
working on it. Please get back to me if you have any other questions.
Jun 13, 2011 | Whirlpool Duet GHW9150P Front Load Washer
Mar 27, 2009 | Kenmore Elite 45986 Front Load Washer
Aug 11, 2008 | Whirlpool GSC9455 Top Load Washer
886 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: