Hello,
Here are the steps to rest the phooconductor unit.
Entering Configuration Menu
1. Turn off the printer.
2. Press and hold Select and Return.
3. Turn on the printer.
4. Release the buttons when Performing Self Test displays.
The message CONFIG MENU displays on the top line of the operator panel.
To reset the counter:
1. Select Reset PC Cnt from the CONFIG MENU.
2. Press Select to reset the counter to zero.
Note: Permanent page count is not affected by this operation.
I hope this helps,
Buddy
Corporate Computer
www.ccl-la.com
Over 21 years of PC and printer support/repair
1,556 views
Usually answered in minutes!
×