Question about Computers & Internet

1 Answer

NO SOUND OUTPUT - Computers & Internet

Posted by on

  • Matthew Shockey
    Matthew Shockey May 11, 2010

    If you would be so kind as to elaborate for me, no sound output could mean a few things, but a model number and any error messages you've received would help all of us here help you.

    When you open windows media player, does it bring up an error message?
    Did you check in the control panel under Sound to make sure your speakers or one of the channels isn't muted?
    Is this a desktop, if so did you change the sound card recently?
    When did this problem start occurring, did it happen after you installed a new application?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 85 Answers

Click on the speeker in you task bar make shure there not a check in the mute box and the sound level is up also check the sound level on your media player. if all is good there then it might be in your registry, let me know, i can help with the reg also but try this first.

Posted on Jun 21, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I plug-in my vp1220f floor monitors in to the monitor mix on the pmp 2000 i get no sound or little sounds


If you are referring to the "monitor" output , this is a Pre-amp output which connects to a power amp or speakers that have built-in power amps. The Monitor output is a high impedance output. This output will not drive speakers directly.

Jun 02, 2014 | Behringer PMP-2000 Powered Mixer

1 Answer

No sound output


Check that the audio output you have selected on your computer is going out on HDMI cable. If your sound card will not process HDMI output you will never get sound. Changing HDMI sound from computer to tv

Mar 26, 2014 | Toshiba 32C110U 32 in. LCD TV

1 Answer

Some my movie(HD) have no sounds output


The likely cause if only some of your movies have no sound output is that your sound system or sound card do not support or do not have the codecs for the sound output that movies sound is encoded with.

Mar 08, 2011 | Computers & Internet

1 Answer

No sound from the HDMI


This document pertains to HP or Compaq PCs with an HDMI (High-Definition Multimedia Interface) connector for connecting a monitor or TV. If you use HDMI to connect your display, you must activate HDMI sound by adjusting your Windows settings . If HDMI is not activated, you cannot hear any sound. Because of this, HP recommends that you connect analog speakers to the computer to hear sound during the initial setup of the computer. Use the following steps to activate HDMI sound on your computer: NOTE: If you ever perform an HP system recovery, you must repeat this procedure to activate sound for the HDMI connector.
  1. Right-click the Volume icon by the time in the lower-right corner.
  2. Click Playback Devices . The Sound window opens.
  3. On the Playback tab, click Digital Output Device (HDMI) if it is listed. If it is not listed, click Realtek HDMI Output . Figure 1: Digital Output Device (HDMI) selectionc01503048.gif Figure 2: Realtek HDMI Output selectionc01063625.gif
  4. Click Set Default .
  5. Click Apply .
    • If you used Digital Output Device (HDMI) , click OK to close the window. This completes the steps to activate HDMI sound.
    • If you used Realtek HDMI Output , continue with Step 6.
  6. Double-click Realtek HDMI Output . The Realtek Digital Output Properties window opens.
  7. Click the Supported Formats tab.
  8. Place a check in the 48.0 KHz check box, and make sure that there are no checks in the Dolby Digital check box and all other check boxes. Figure 3: Supported Formats settings in the Realtek Digital Output Properties windowc01503049.gif NOTE: For most TVs to play back audio, the sample rate must be 48.0 KHz.
  9. Click OK to close the window.

Nov 23, 2009 | HP Compaq Computer Speakers

1 Answer

The left side main output won't put out any sound on my Denon AVR-900.


connect your right speaker cable to the left output, if the sound comes out then the problem is on the left speaker ( the cable or the speaker itself ), but if still no sound, then the problem is on the power output of the unit, need to repair them

Oct 20, 2009 | Denon AVR-900 Receiver

2 Answers

I cannot get any sound output from my Acer Aspire T180 desktop PC. I changed the monitor from the original "out of the box" monitor. I have plugged in media speakers but there still is no sound output.


Sounds like a driver problem.

You should be able to get a universal Realtek driver from here.....

http://www.everydriver.com/?t=computer&m=realtek&p=download%20drivers%20for%20realtek&gclid=CIzMwe2-_ZwCFc0B4wodGHlNag

Sep 19, 2009 | Acer Aspire™ T180 PC Desktop

1 Answer

No sound


  • check the following
  • check speaker &its wire & connector for loose.
  • check supply to sound output stage.
  • check components related to sound output stage.like low value resistor & coupling capacitor.
  • check for loose print in sound output stage.
  • hope this will help.

 

Oct 12, 2007 | Televison & Video

1 Answer

Sound


  • check the following
  • check speaker &its wire & connector for loose.
  • check supply to sound output stage.
  • check components related to sound output stage.like low value resistor & coupling capacitor.
  • check for loose print in sound output stage.
  • hope this will help.

Oct 11, 2007 | Emerson EWF2704 TV

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...