Question about GE Spacemaker Washer and Dryer Electric Laundry Center

2 Answers

Washer does not "click" to drain and spin cycle

Our ge spacemaker w/d starts off fine washes then stops when its time to drain and spin..what do we need...going to the laundromat.
Thanks for any help

Posted by on

  • robbie231 Jun 21, 2009

    Hi vic

    You rock! at least we have some direction to go in..

    When it would stop we would slam the top this would make it continue..On the side where that lid switch is..Now nothing.."I'm a carpenter..lol"

    The lady at the laundromat said mybe transmission??

    Switch sounds easier..

    Thanks for your help!!

    Spent Sunday at the Laudromat..sux

    Model # WSM2420TBAWW GE SPACE MAKER W/D

  • robbie231 Jun 26, 2009

    Vic Thank you so much part came in today took me 15 minutes to put in were golden...

    Thank You !!!

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,136 Answers

Hi, Check the lid switch. Most models will not drain or spin when the lid switch is bad.
If I can get the model#, I wil try and asist you further.

Vic

Posted on Jun 21, 2009

  • Victor
    Victor Jun 26, 2009

    You are very welcome. Any other time I can help, please look me up.



    Vic

  • Victor
    Victor Jun 26, 2009

    P.S.

    They will miss you at the laundromat!!!!!!!

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

I had similar problem with my ge spacemaker washer (model gtun275emww1, only in use 3 mos!). I was about to call the repairman after 24 hours of being stuck and not advancing to next portion of the cycle. I got info from ge site to reset the motor (mine had a surge two days prior, and also an off balance load... either of those may have caused my washer problem). How to reset the motor on (some) newer GE washers - unplug the power cord, then within 30 seconds of replugging power cord open and close the lid (raise lid at least 2 inches). 6 total times within 12 seconds. Sounds strange, but my washer is working today!! Hubs and I did this complete reset routine twice in a row, just for good measure. Good luck!

Posted on Mar 19, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My GE SpaceSaver Washer/dryer will wash, but when it's time to rinse and spin the machine stops. It will not drain, riinse , or spin.


It is possible that the machine does not start off the cycle because there are errors due to feedback from the inputs. For the program to start up the main program controller must initiate the INLET/MOTOR/DRAIN pump/ valve to open up and allow each function to be driven starting from the flow of water into the drum as also the drain valve to open to exit the water at the point of the program cycle. If this does not happen then the voltage at the valve/motor/pump must be checked or the fault relates to no voltage from the controller. This means the controller is a suspect.

Jul 27, 2012 | GE Spacemaker Washer and Dryer Electric...

1 Answer

GE GSLS1100 Spacemaker won't spin or drain. Washes fine then makes a rattleling noise during spincycle.


When I first started using my washer when I hooked up the water it would fill the hose and then stop until I started the machine. Now when I hook up the washer to the faucet water starts to fill the machine before I close the lid and before I start the washing process....? The last time I used the machine it didnt drain and I had a flood, is there a problem with it now???

Jan 09, 2011 | GE Spacemaker WSLP1100D Top Load Washer

1 Answer

When the washer gets to the spin cycle it seems to stop and not pump out the water. All other cycles seem to work ok. It is a GE spacemaster 22"


Normal 0 MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman";} Hi,

Problems with a washing machine not spinning or not draining are often inter related..

If you are having a problem with your top load washer then check out this tip...

Washing Machine does not Pump or Spin


If you are having problems with your front load washing machine then checkout this tip...

Front Load Washing machine not draining and or not spinning


heatman101

Sep 02, 2010 | GE Spacemaker WSLP1100D Top Load Washer

1 Answer

Washer does not drain , rinse or spin


most common reason is the water pump has failed the unit will not spin untill it detects all the water has gone some times the motor is jammed take it off and look for a small coin or something thats stopping it if not then you may need a new pump motor

Apr 20, 2010 | GE Spacemaker WSLP1100D Top Load Washer

1 Answer

GE Spacemaker No Spin


Most washers use a lid switch that closes the contacts when the lid is closed, look for a "probe" on the lid that pushes a "pad" that closes the switch, it's possible the switch pad or linkage is bent causing erratic contact closing, any way that is the first place to start. THIS IS A SAFETY DEVICE, DO NOT BI-PASS IT. Good Luck

May 21, 2009 | GE Spacemaker WSLP1100D Top Load Washer

1 Answer

GE SpaceMaker washing machine does not stop filling.


try replacing your water selenoid coming in. remember it isnt a mechanical timer it is a computerized timer, so if the selenoid isnt the problem, it might be the computerized timer. computers are very finicky, pain in the a- -!

Mar 23, 2009 | GE WSM2480DWW Unitized Spacemaker Washer...

1 Answer

Spacemaker spin cycle problem


you may have something stuck in the drain pump......

first try using a wet/dry vacuum attach it to the drain hose and try to **** out what ever you have stuck in there... if that works you are good... if not you will have to get open the cabinet to get to the drain pump

Dec 23, 2008 | GE WSM2480DWW Unitized Spacemaker Washer...

1 Answer

Washer won't drain


The switch located to the top which is activated by the lid is bad. replace that and your washer will be fine.

Feb 19, 2008 | GE Spacemaker WSLP1100D Top Load Washer

Not finding what you are looking for?
GE Spacemaker Washer and Dryer Electric Laundry Center Logo

1,133 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Tim Whalen

Level 3 Expert

3074 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a GE Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...