Question about RCA 3-Device Universal Remote with Dedicated DVD Menu Key

1 Answer

I have dish network and i am trying to program my Symphonic DVD player to my remote and i can't find the codes for my dvd do you know of any?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 814 Answers

The web page link below will take you to the RCA Customer Service website page for your model RCA 3-Device universal remote control model number RCR311S. On this page is all the service information for your product. The DVD code for Symphonic DVD players is 3436. You will find this code and all the other codes for your remote control on this page under code lists for RCR311S. I hope this information helps you solve your problem with the remote code number for your Symphonic DVD player. Thank you for using FixYa and have a nice day! /RcaaccessoriesProductDetail.do?ACTION_TYPE_ID=ACTION_TYPE_PRODUCT_DETAIL&http://www.rcaaccessories.com/rcaaccessoriesACTION_CATEGORY_IDSTR_CATEGORY_UNIVERSAL_REMOTES&ACTION_PRODUCT_ID=RCR311S

Posted on Jun 21, 2009

  • stoneheaded Jun 21, 2009

    Jun 21, 2009 - Sorry to say the active
    web link is not working . The web address is correct but the link does
    not go to correct web site. This is the main page website address: [ http://www.rcaaccessories.com/rcaaccesso... ] Copy this web address
    and paste it into the address bar of your web browser and it will take
    you to the main product page. From this page choose the universal
    remote control section , enter this section and look for you model of
    remote control. Once you find your model of remote control, use the
    model number to get the service information for the product. The
    information should include a owners manual and frequently asked
    questions sections. These sections are the most helpful for
    troubleshooting problems with the operation of the remote control.
    Sorry for the incorrect link addresses, something when wrong with the
    translations of the links and they do not work. The new address is
    simpler and should work with no problems. I hope this information help
    you with your problems with the operation of the remote control.Thank
    you for using FixYa and have a nice day.

×

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1126 Answers

SOURCE: code for symphonic dvd player

http://www.remotecentral.com/cgi-bin/files/rcfiles.cgi?area=other&db=devices&br=oneforall&dv=universalremote&md=urc3021expert3&kw=&st=&ar=&dt=&so=&pg=1&file=others/one_for_all/urc3021-manual.zip
Codes are in the back of user manual. Hope this helps.

Posted on Sep 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a code for Symphonic DVD that works with Dish Network


Hi, Cheri Torres with DISH Network Customer Service here. I came across your post recently and wanted to see if I could help. For each of our different models of remotes we have a few different codes that could work with a Symphonic DVD player. I will list here for you the best codes for our more popular models of remotes and also the instructions for programming the remote to your DVD player. I hope this information helps you and if you have any further questions or concerns feel free to ask! :)

Remote model # Remote codes
3.0, 3.1, 3.2, 3.4 IR remotes - codes 1688, 1683, 1588, 1594.
5.0, 5.2, 5.3, 5.4 IR remotes - codes 1632, 1522, 1300, 1588, 1594 1624, 1692.
4.0 and 4.4 IR/UHF remotes - codes 1632, 1569, 1733, 1569, 1846.
6.0, 6.2, 6.3, 6.4 IR/UHF remotes - codes 1733, 1632, 1694, 1588, 1594, 1756.
20.0 IR and 21.0 IR/UHF remotes - codes 1658, 1588, 1804, 1531, 1617, 1619.

Instructions for addressing the remote to the DVD player
  1. Press and hold the AUX mode button until all mode button back lights come on, then release.
  2. Use the number buttons to enter the device code corresponding to the equipment.
    Note: The light will blink off after each digit is entered and then return to a steady light.
  3. Press the POUND (#) button.

    If the code entered is valid for the remote, the mode light flashes three times.

Aug 20, 2011 | RCA 3-Device Universal Remote with...

2 Answers

I am trying to connect my dish network remote to my gpx dvd player model d1816 and dont know how.


Hi my nameis Mike Houston of DISH Network and I see where you want to set the DISH remoteto your GPX DVD player. There are no codes to put in manually but we do have aPower Scan that will go through all the codes and allow the programming to theDVD player, I will leave the link to help with these steps. http://www.dishnetwork.com/SupportSection/power-scan-instructions

Oct 11, 2010 | GPX D1816 DVD Player

1 Answer

Magnavox blue ray dvd. model nbmgf c need remote code for dish network


Hi there! In order to be able to provide the definite codes that will allow you to program your remote to your Magnavox Blue Ray DVD player, I would need the type of remote that you have- this can be found on the back of your remote, it would be displayed as something along the lines of 3.0, 4.0, 5.0, etc. To obtain a few codes that will likely allow you to successfully program the remote I used 5.0 because it is a common remote that is used with quite a few of our DISH Network receivers. The codes you can try for your DVD player would be, 829 (most successful) if not then please try the following, 685, 533, 554, or 556. After trying those codes if your attempts are still unsuccessful you can also check the manual that came with the DVD player from the manufacturer or just contact us here at DISH Network - although I do know sometimes the remote codes can be located in the manual. Hope the codes help & work for you!

-Kirstie DISH Network

Oct 05, 2010 | DISH Network IR Remote Control

1 Answer

I want to program my duraband 1002 dvd player to my dish network remote does anyone know a code that will work?


It's been a few months, so I am hoping that you were able to find the code. But if not, below is a link that will not only give you the available codes, but also walk you through programming the remote to the player.

http://www.dishnetwork.com/downloads/pdf/user_guides_and_manuals/Remote_Codes_Web_Page.pdf

Becki Barned
DISH Network Customer Service

Sep 18, 2010 | Durabrand DVD-1002 DVD Player

1 Answer

My remote broke and im trying to get the codes for it for my dish network remote. Do you know them ???


Sorry to hear about the original remote, we would be happy to help with getting your DISH remote programmed to your Curtis DVD player. Here is a list ofcodes that should address your DISH Network remote to your Curtis DVD player: 678, 679, 683, 585, 592, and 594. Start by pressing and holding the DVD/VCR button located on the top of the remote until allthe mode buttons at the top of the remote light up, then release. Use thenumber buttons to enter one of the codes for your Curtis DVD player, thenpress the pound (#) button. If the code entered is valid for the remote, the modelight flashes three times.To check that the code works try several different functions on the remote tomake sure it will properly operate your DVD player. Keep in mind that somecodes may not be compatible with your equipment. If this is the case, pleasetry the other codes listed for that device until you find one that iscompatible with your equipment. We hope this helps and thank you forbeing a valued DISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

Sep 01, 2010 | Curtis DVD1047 DVD Player

2 Answers

How to use your control with my dvd player


Hello chegui59, my name is Michael Hurst with DISH Network. There are 2 ways of programming your remote to your DVD player. You can use a remote code for your DVD player. In order to give you the right remote code I would need to know the manufacture of your DVD player and the model of the remote that you have. You can also try a Power Scan to get the DVD player programmed into your DISH remote, here are the steps: Withthe desired equipment on, press and hold the correct mode button until all modebutton backlights illuminate, then release. Press and release the Power button. AUX Mode: Before pressingand releasing the Power button. Press 0 for a TV, Press 1 for a VCR/DVD andPress 2 for any other device. Then Press STAR (*). Press the Up button once asecond while pointing the remote at the desired equipment. If the code for theequipment comes up, the equipment will power off. Press the POUND (#) button. Ifthe code entered is valid for the remote, the mode light flashes three times.

May 29, 2010 | DISH Network IR Remote Control

1 Answer

Dish network remote to run RCA DVD player


I had rca remote that did not recieve ir signals but rf signals instead. Check online with rca or in owners manual for what type of signal factory remote sends. The dvd player I had was 5 dvd and that was the case. Dish might have an option like direct tv where you can program rf signals as well. Call dish network support or look online

Apr 25, 2010 | DISH Network IR Remote Control

1 Answer

Cant program dish network remote to my sylvania tv/dvd combo


Not likely will your current remote ever have the capability for your newer model. The code sets are designed into the Dish remote as they were available then and don't 'learn' newer sets.
You might try to find one of the other Funai brand code sets under these names:
Funai, Symphonic, Emerson, Aventura, Durabrand, ESA, Magnavox, INSIGNIA, and Misakai
Even if you do find one that gives you some functions, I doubt you will find one set for both TV and DVD player so you will have to try individual code sets; one for TV, another for DVD.

Jul 12, 2009 | Toshiba MW27F51 27 in. TV/VCR/DVD Combo

Not finding what you are looking for?
RCA 3-Device Universal Remote with Dedicated DVD Menu Key Logo

392 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74245 Answers

matt martin
matt martin

Level 3 Expert

1210 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...