Question about Dryers

1 Answer

My kenmore dryer will start and run when cold after it heats up the flame (gas dryer)goes out then after 3 or 4 mins. i can see the igniter light but will not start a flame after 5 or 6 seconds the igniter will just go out and then try to light again 3 or 4 more mins.later not to light again!

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 266 Answers

Gas valve coulkd be bad if not opening after a certain period of time the ignitor will turn off and attempt a few times more,does it have a soilenoid valve also open and clean any carbon that might be built up over yrs

Posted on Jun 21, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Igniter starts to glow for 3-5 sec while making noise every minute or so


Check the thermocouple it is going bad or already has and that is why the gas valve is not staying open.

Jul 08, 2017 | Whirlpool GGW9200L Gas Dryer

1 Answer

Dryer starts hot surface ignitor comes on gas valve opens i get a flame 5 mins flame shuts off hot surface ignitor repeats and tries to ignite no flame after unit is off for 20 mins to 30 mins off unit...


Hi, If you are having problems with your gas dryer not heatingthe most common problem is that the ignitor goes bad. Even though it glowssometimes it is still not working properly. if you dryer is gas check out this gas no heat tip.... If you have an electric dryer, you can have many differentthings that can go wrong causing the dryer not to heat. check out this electric no heat tip...

heatman101

Sep 17, 2010 | Kenmore 77632 Gas Dryer

1 Answer

Hi, have a kenmore gas dryer, flame comes on about


Hi, If you have a gas dryer2_bing.gif.
The most common problem with a gas and no heat is the ignitor going bad...

Here is a tip that I wrote about that problem...

Gas Dryer2_bing.gif not Working Gas Dryer2_bing.gif Not Heating
http://www.fixya.com/support/r4398592-gas_dryer_not_working_gas_dryer_not

If your dryer2_bing.gif is electric2_bing.gif..
There could be a number of different problems...
Check out this tip that I wrote about this problem...

Dryer2_bing.gif Troubleshooting2_bing.gif Electric2_bing.gif Dryer2_bing.gif won t Heat
http://www.fixya.com/support/r3866345-dryer_troubleshooting_electric_dryer_won

heatman101

May 17, 2010 | Dryers

1 Answer

Kenmore gas stove not coming out of pre- heat model 66575842001


This sounds like a flame sensor problem. No signal from sensor will shut down gas valve. Check flame sensor position in flame/or replace

Sep 02, 2009 | Kitchen Ranges

1 Answer

Kenmore Gas Dryer ignites then stops heating after ten minutes.


If the glow bar comes back on and the gas does not light,replace the gas valve coils. If the ignitor does not come back on,replace the flame sensor.

Sep 01, 2009 | Kenmore Dryers

1 Answer

My kenmore gas dryer turns on and lights runs about five mins. hot and then starts blowing cold air and ignitor keeps glowing on and off but wont light flame


see if the thermal bulb is located in the path of the flame, and if it is you will have to change the gas thermal sensing bulb.

Aug 14, 2009 | Kenmore Dryers

1 Answer

Kenmore dryer 70 series flame ignites, but goes out after 5 mins


If it's gas, the coil valves get weak and are unable to hold themselves open when hot. First, check the exhaust vent. If it's clogged, it can't remove heat and it will shut off prematurely. Most likely the coil valves though.

Mar 03, 2009 | Kenmore 63942 Dryer

1 Answer

Inglis gas dryer heat loss


Replace these solenoids on the gas valve. Feel them if you can. They get hot and quit.d910ca8.jpg

Feb 04, 2009 | Dryers

1 Answer

Whirlpool gas dryer heat goes on then off then on again


should have electronic igniter that light gas after turned on.

Jan 03, 2009 | Kenmore 73952 Gas Dryer

Not finding what you are looking for?
Dryers Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Brad Brown

Level 3 Expert

16174 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...