Question about Cisco 7941G IP Phone

1 Answer

Does not ring

I've been missing calls because i don't hear my phone ringing

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 58 Answers

The Volume key allows you to adjust the volume level for the currently active audio device (handset, headset, or speaker). When no audio devices are active, pressing the Volume key adjusts the ringer volume.

Adjusting the Volume of the Ringer, Handset, Headset or Speaker
Note: By performing this function, default volume level will be replaced.

  1. Press the up or down arrow at either end of the Volume key to reach the desired volume level.
    does not ring - 090081223111052.jpg

  2. When you are satisfied with the setting, press the Save softkey.
Note: When adjusting only the ringer volume, there is no need to press Save. The settings are automatically saved upon adjustment.

See the below link for user manual

http://noc.unet.maine.edu/IPT/7961_7941_User_Guide.pdf

Posted on Jun 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cannot hear the phone ringing when someone calls


Hi
Could be a loose connection on your phones speaker.Have it checked or probably replaced.
Does it vibrate?
Make sure the phones no set to mute on your profiles settings.

Feb 27, 2012 | Cell Phones

1 Answer

I have a panasonic kx-dt343, i can find the incoming call log but only calls that i've answered not ones i've missed. how do i check the missed calls? how do i set it up so the phone will flash if...


Normally, the ICD group is 601. So, press PROGRAM, pick a button, and dial 54601 STORE. The button becomes a log for all calls ringing into the 601 calling group.

Carl

Sep 22, 2011 | Panasonic KXDT343 Phone

1 Answer

I have a Motorola C118 phone. I've had it for quite a few years, but over the past few months the ring volume for incoming texts and calls has become very quiet and I often miss texts or calls. The...


Hi,
Find the speaker on the phone and check that it is not plugged part way with dirt/dust....
other then that there is nothing you can do... the problem is internal...

heatman101

Jun 27, 2011 | Motorola Mobility C118 Cellular Phone

1 Answer

I forget how to change my message


I do not understand why this is a problem??
Why don´t you live without the answering machine and let the phone function without a ring, that way you can see who called-missed calls-
and react the same way as you would with the answering machine on'

Jun 17, 2010 | Samsung Eternity Cell Phone

1 Answer

The caller hears 7 rings before the Tundra rings with their call We have missed calls on the Tundra because the caller assumes we are not available. When calling the Tundra, the caller hears 4 rings......


The tundra needs to have a software upgrade. This upgrade is done through calling 611 and needs to have a software update sent to the phone. If you have any questions email me at nfirth@att.blackberry.net

Oct 23, 2009 | Motorola Mobility Tundra VA76r Cell Phone

1 Answer

# of rings


Hi Sharon,
The rings you hear when dialing your phone number is a machine in the local telephone office that is in place so you have something to listen to while your call is being processed and not your actual phone ringing, also the caller ID requires one to two ring cycles to gather the information it displays on your screen therefore the amount of rings you hear when calling a number rarely matches the actual number of rings at the phone you are calling. There is no programming in the Samsung 100 to change this as it is controlled by your local phone company. Hope this helps explain the situation, Good Luck

Jul 29, 2008 | Samsung DCS 12 Corded Phone

1 Answer

Can't hear the phone ringing


you can take the phone and have it check to see if the phone's speaker is replaced.

Jun 04, 2008 | Motorola Mobility MOTORIZR Z3 Cellular...

Not finding what you are looking for?
Cisco 7941G IP Phone Logo

Related Topics:

484 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cisco Computers & Internet Experts

Gopi Venkatesan
Gopi Venkatesan

Level 2 Expert

74 Answers

Prashant M
Prashant M

Level 3 Expert

2263 Answers

Gareth Tomlinson
Gareth Tomlinson

Level 2 Expert

116 Answers

Are you a Cisco Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...